• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.205-211
• /
• 2000

Friction control is highly desirable for optimization of tribological systems. In this work, the effect of geometric structure of the solid surface on friction is investigated using a Scanning Electron Microscope equipped with a tribotester. Silicon and silicon oxide specimens were used and undulations on the surface were fabricated by mechanical and chemical methods. It is shown that the friction coefficient depends on the relative dimensions of the ball and the width of undualation. By optimizing the geometry of the undulation, friction reduction may be achieved.

• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.81-90
• /
• 2019

The shear behavior of soil-concrete interface is mainly affected by the surface roughness of the two contact surfaces. The present research emphasizes on investigating the effect of roughness of soil-concrete interface on the interface shear behavior in two-layered laboratory testing samples. In these specially prepared samples, clay silt layer with density of $2027kg/m^3$ was selected to be in contact a concrete layer for simplifying the laboratory testing. The particle size testing and direct shear tests are performed to determine the appropriate particles sizes and their shear strength properties such as cohesion and friction angle. Then, the surface undulations in form of teeth are provided on the surfaces of both concrete and soil layers in different testing carried out on these mixed specimens. The soil-concrete samples are prepared in form of cubes of 10*10*30 cm. in dimension. The undulations (inter-surface roughness) are provided in form of one tooth or two teeth having angles $15^{\circ}$ and $30^{\circ}$, respectively. Several direct shear tests were carried out under four different normal loads of 80, 150, 300 and 500 KPa with a constant displacement rate of 0.02 mm/min. These testing results show that the shear failure mechanism is affected by the tooth number, the roughness angle and the applied normal stress on the sample. The teeth are sheared from the base under low normal load while the oblique cracks may lead to a failure under a higher normal load. As the number of teeth increase the shear strength of the sample also increases. When the tooth roughness angle increases a wider portion of the tooth base will be failed which means the shear strength of the sample is increased.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.47-52
• /
• 1999

In recent years, the micro-tribological behavior of silicon has been the topic of much interest. peformance of thin film under light load is important for potential applications in MEMS. In this work under light load and various humidity, the tribological behavior of undulated surface with various width and shape was Investigated. The results show that undulated surface of linear type had good tribological properties abrasive wear occur depending on the sliding condition. Also the effect of humidity on friction and wear was not important if exist undulation. Finally, undulations on HDD were found to be effective in trapping wear particles.

• Tribology and Lubricants
• /
• 제14권2호
• /
• pp.63-74
• /
• 1998

The damage of cam/tappet surface is one of the major reasons for energy loss in an I.C. engine. High friction causes the accelerated wear of the cam/tappet surfaces which in turn changes the valve opening/closing timing. During the accelerated test evidence of both rolling fatigue and sliding abrasive wear could be found. Based on the results of the accelerated test, a scheme was devised to decrease tappet wear. Wear reduction of the tappet was achieved by using undulated surface topography in the tappet center region. The wear reduction is achieved by trapping of the wear particles in the undulations as well as by increasing the supply of lubricant to the sliding interface.

• 한국광학회지
• /
• 제25권4호
• /
• pp.207-215
• /
• 2014

본 논문에서는 단방향 섬유복합재료를 사용하여 만든 준등방성 라미네이트 반사경내의 표면정밀도 문제에 대하여 기술하였다. 복합재 반사경내의 방사형 방향의 굽힘강성계수의 변화로 발생할 수 있는 국부적 표면변형의 형상/패턴 및 반사경 표면에 섬유패턴 효과를 감쇠시키기 위해 추가 수지층이 도포된 반사경에 온도변화 발생시 굽힘강성의 불균일성으로 인하여 발생하는 표면의 굴곡을 수치해석과 실험으로 검토하고 문제점 해결을 위한 방향을 제시하였다.

• 대한수의학회지
• /
• 제34권4호
• /
• pp.687-694
• /
• 1994

The development of rumen in fetuses between 60, 90, 120 days of gestation and neonates of Korean native goats was investigated by light, scanning electron microscopy. The results were summarized as follows; 1. In the 60-day-old fetuses, the stomach was developed and differentiated into four compartments of rumen, reticulum, omasum, and abomasum. The ruminal epithelial layers were differentiated into two zones; a small dark basal and a large light luminar zones. 2. In the 90-day-old fetuses, the light luminar zone of the rumen was 6-12 times thicker than the dark zone. 3. In the 120-day-old fetuses, the wall of the rumen had increased in thickness, and its the mucosa was still smooth. Several undulations of various depths involving the basal zone, basement membrane and lamina propria were observed at irregular within the light zone. 4. In the neonate, the wall of the rumen had increased in thickness and the luminar surface had become wavy due to the appearance of several shallow furrows in the luminar surface of the epithelium especially between the tips of the relatively more developed undulations. 5. Scanning electron microscopic studies: In the 90-day-old fetuses, numerous microvilli and microridges were observed on the superficial epithelial layer of the rumen. The ruminal papillae were already formed at 120 days of gestation. In the 120-day-old fetuses, the ruminal papillae formed short dome-shape. In the neonate, the ruminal papillae formed pebble-shape or short finger like.

• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.29-38
• /
• 1999

In recent years, the tribological behavior of coated ceramic material has been the issue of much interest. Particularly, the understanding of the tribological performance of thin film under light load is important for its potential in applications of MEMS. The friction and wear behavior of ceramic material that occur at light load depends on several factors such as surface roughness, contact area and material properties. In this work, the tribological behavior of coated silicon under light load and low speed was investigated. Particularly, the effects of coated materials, humidity and undulated surface were also studied. The results show that the effect of humidity on fiction was influenced by the apparent area of contact between the two surfaces. Also both adhesive and abrasive wear occurred depending on the sliding condition. Finally, undulations on the silicon wafer were found to be effective in trapping wear particles and resulted in the reduction of friction.

• 한국해안·해양공학회논문집
• /
• 제30권6호
• /
• pp.263-269
• /
• 2018

해저에서 지진 및 산사태 등에 기인하는 수심변화는 자유수면의 변동을 유발한다. 이러한 자유수면의 변동은 해안으로 전파하고 천수현상에 의해 파고가 상승하면서 큰 피해를 야기한다. 지진해일의 생성 및 전파과정을 모의하기 위해 다양한 수치해석모형이 개발된 바 있다. 대부분의 지진해일모형은 해저 지반의 움직임이 수면에 즉시적이고 동일하게 전달된다는 가정하에 초기수면을 결정한다. 하지만, 이 접근 방법은 시간적 및 공간적 차이를 지니고 발생하는 해저지진의 특성을 고려하지 못하며, 이는 그대로 해석오차에 반영된다. 본 연구에서는 Hammack(1973)의 해석해를 응용하여 수심이 시간차를 가지고 변할 때 이로 인한 초기 자유수면의 변동과 이렇게 변화된 수면의 전파 특성을 모의하고 그 결과를 검토하였다. 이는 다양한 유형의 지반운동과 자유수면 형성과의 인과관계 및 상승된 자유수면의 이동속도 등의 관계규명에 도움이 될 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.101-106
• /
• 2006

The geoidal undulations are needed for determining the orthometric heights from the Global Positioning System GPS-derived ellipsoidal heights. There are several methods for geoidal undulation determination. The paper presents a method employing a simple architecture Two Layer Multiquadric-Biharmonic Artificial Neural Network (TLMB-ANN) to approximate an area of 4200 square kilometres quasigeoid surface with GPS-levelling data. Hardy’s Multiquadric-Biharmonic functions is used as the hidden layer neurons’ activation function and Levenberg-Marquardt algorithm is used to train the artificial neural network. In numerical examples five surfaces were compared: the gravimetric geometry hybrid quasigeoid, Support Vector Machine (SVM) model, Hybrid Fuzzy Neural Network (HFNN) model, Traditional Three Layer Artificial Neural Network (ANN) with tanh activation function and TLMB-ANN surface approximation. The effectiveness of TLMB-ANN surface approximation depends on the number of control points. If the number of well-distributed control points is sufficiently large, the results are similar with those obtained by gravity and geometry hybrid method. Importantly, TLMB-ANN surface approximation model possesses good extrapolation performance with high precision.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1546-1548
• /
• 2002

In this paper, the electrical characteristics of pentacene thin film transistors(TFTs) with stacked and surface-treated gate insulators have been investigated. The semiconductor layer of pentacene was thermally evaporated onto the stacked gate insulators. For the gate insulating materials. PVP(PolyvinylPhenol) and polystyrene were spin-coated with two different stacking orders, PVP-polystyrene and polystyrene-PVP. Rapid solvent evaporation during the spin-coating processes of these insulating layers produces non-equilibrium phase morphologies accompanied by surface undulations on gate insulator interfaces. This non-equilibrium phase morphology affects the growth mode of the subsequent pentacene layer. Therefore, in order to smoothen the gate dielectric surfaces, gate dielectric surfaces were rubbed laterally along the direction from the drain to the source TFTs with with stacked and surface-treated gate insulators have provided improved operational characteristics.