• 분석과학
• /
• 제18권4호
• /
• pp.355-361
• /
• 2005

본 연구는 인산의 전처리에 의한 두 종류의 활성탄소섬유의 특성 변화와 여기에 칼륨을 처리하여 표면 특성을 비교하고자 하였다. X-선 회절 패턴은 인산을 전처리함에 따라 칼륨종을 포함하는 활성탄소섬유에 대한 금속과 금속염의 존재에 대한 좋은 결과를 나타내었다. 인산을 처리한 후에 표면특성과 비표면적 변화에 차이의 원인을 나타내기 위하여, 동공구조와 표면 모폴로지를 흡착분석과 SEM에 의하여 연구하였다. 인산을 가지고 전처리한 활성탄소섬유의 칼륨 처리효과에 대한 화학적 구성에 대한 원소분석을 위하여 EDX를 사용하였다. 최종적으로, 산소를 포함하는 기능기의 형태와 정성분석은 Boehm에 의하여 제안된 방법으로 부터 결정하였다.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.250-258
• /
• 2023

Ceramic oxide layer was formed on the surface of high silicon aluminum alloy by using PEO (plasma electrolytic oxidation) process. The microstructure of the oxide layer was analyzed using scanning electron microscopy (SEM) and x-ray diffraction patterns (XRD). The high silicon aluminum alloy prior to PEO process consists of Al, Si and Al₂Cu phases in XRD analysis, whereas Al₂Cu phase selectively disappeared after PEO treatment. Considerable decrease of relative intensity in most of peaks in XRD results of the high silicon aluminum alloy treated by PEO process was observed. It may be attributed to the formation of amorphous phases after PEO treatment. The corrosion behavior of the high silicon aluminum alloy treated by PEO process was investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that the high silicon aluminum alloy treated by PEO process shows greater corrosion resistance than that untreated by PEO process.

• The Journal of Korean Physical Therapy
• /
• 제26권2호
• /
• pp.110-116
• /
• 2014

Purpose: The purpose of study was to investigate the effects of combination patterns exercise of Proprioceptive Neuromuscular Facilitation (PNF) on unstable surfaces on pain, functional disability, and fear avoidance belief in patients with chronic low back pain. Methods: Twenty four patients were assigned to either the experimental group (n=12) or the control group (n=12). Patients in the experimental group performed combination patterns exercise of PNF on unstable surfaces. Patients in the control group performed combination patterns exercise of PNF on stable surfaces. Both exercises were performed for five days per week, for a period of six weeks. Pain was measured by the Visual Analogue Scale (VAS) and University of Alabama at Birmingham (UAB). Functional disability was measured using the Oswestry Disability Index (ODI) and Roland Morris Disability Questionnaire (RMDQ). Fear avoidance belief was measured using the Fear Avoidance Beliefs Questionnaire (FABQ). A paired t-test was used for determination of differences before and after treatment, and an independent t-test was used for determination of differences between treatment groups. Results: In within group comparison, the experimental group showed statistically significant difference for all variables (p<0.05). In comparison between two groups, the experimental group showed relatively greater significant difference for all variables (p<0.05). Conclusion: Based on such results, it can be said that combination patterns exercise of PNF on unstable surfaces has an effect on pain, functional disability, and fear avoidance belief in patients with chronic low back pain.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4130-4135
• /
• 2013

본 논문은 석재의 표면 마감 시 다양한 패턴의 무늬를 가공하기 위한 전용기에 대한 연구이다. 기존의 평범한 무늬에 대하여 기능 및 예술성을 부여하여 석판의 활용 범위를 확대 발전시키고자 한다. 이에 본 연구에서는 Water-Jet을 이용하여 석재의 표면 가공 시 다양한 패턴에 대한 적용이 가능한 전용기를 개발하였다. 전용기는 석판을 이송하는 이송 기구, 다양한 패턴 무늬 생성을 위한 노즐 이송 기구, 초고압수를 이용한 멀티노즐 기구, 모션 제어를 위한 제어시스템, 그리고 패턴 무늬 선택을 위한 S/W로 구성되어 있다. 개발되어진 전용기에 대한 다양한 패턴 무늬에 대한 실험을 통하여 성능 평가를 하였다. 이를 통하여 다양한 종류의 패턴 무늬 가공이 가능하며, 가공 오차 ${\pm}0.5mm$의 정밀도를 갖는 전용기를 개발하였다.

• KSBB Journal
• /
• 제24권1호
• /
• pp.17-24
• /
• 2009

For the biosurfactant production process at first Candida bombicola, Sphingomonas yanoikuyae, Sphingomonas chungbukensis and Myxococcus flavescens were studied. As the most productive microorganisms C. bombicola, S. yanoikuyae and S. chungbukensis were selected. During many petrochemical industrial processes variable volatile organic componds are produced and they can cause an unpleasent and unhealthy atmosphere. Usually the volatile organic compounds are treated with chemical detergents. The chemical detergents cannot be easily degradable and can be accumulated in the nature. In this study we tried to develop a production process for the biosurfactants, which can substitute some chemical detergents in some chemical processes, with microorganisms. At second the treatment of the volatile organic compounds with the biosurfactants were tested and compared with the treatment with chemical detergent. The production productivities of the biosurfactant with microorganisms were compared. The growth patterns and kinetics of the microbial cells and the surface tension values of the biosurfactants were studied. The changes of the surface tension in variable pH conditions and sodium chloride concentrations were also studied. The volatile organic carbons were treated in a small plant scale. As the result of this study, it indicated that the specific growth rate of S. chungbukensis was the fastest by 0.144 ($hr^{-1}$). For surface tension, C. bombicola (38.1 dyne/cm) had the lowest value, and solubility of the volatile organic carbon was similar in C. bombicola and S. chungbukensis. (Toluene: about 0.1 Unit, Chloroform: about 0.6${\sim}$0.7 Unit, Benzene: about 0.5${\sim}$0.8 Unit). The biosurfactant, which were produced by C. bombicola, was selected for the further study for the volatile organic carbon treatment. With the biosurfactans from C. bombicola could remove the volatile organic carbon about 80% and this removal rate can be comparable with chemical detergent.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.362-368
• /
• 2009

Ti scaffolds with a three-dimensional porous structure were successfully fabricated using powder metallurgy and modified rapid prototyping (RP) process. The fabricated Ti scaffolds showed a highly porous structure with interconnected pores. The porosity and pore size of the scaffolds were in the range of 66$\sim$72% and $300\sim400\;\mu$m, respectively. The sintering of the fabricated scaffolds under the vacuum caused the Ti particles to bond to each other. The strength of the scaffolds depended on the layering patterns. The compressive strength of the scaffolds ranged from 15 MPa to 52 MPa according to the scaffolds' architecture. The alkali treatment of the fabricated scaffolds in an aqueous NaOH solution was shown to be effective in improving the bioactivity. The surface of the alkali-treated Ti scaffolds had a nano-sized fibre-like structure. The modified surface showed a good apatite forming ability. The apatite was formed on the surface of the alkali treated Ti scaffolds within 1 day. The thickness of the apatite increased when the soaking time in a simulated body fluid (SBF) solution increased. It is expected that the surface modification of Ti scaffolds by alkali treatment could be effective in forming apatites in vivo and can subsequently enhance bone formation.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.262-271
• /
• 2000

The purpose of this study was to estimate shear bond strength according to difference in Targis surface treatment and storage condition. 140 non-carious extracted human molars and Targis D210(Ivoclar, Liechtenstein) were used in the present study and were divided into 7 experimental groups respectively according to surface treatment of Targis. Group 1 ; No treatment, Group 2 ; $50{\mu}m$ aluminium oxide blasting, Group 3 ; 4% HF etching for 3 minutes, Group 4 ; 4% HF etching after blasting, Group 5 ; silane treatment after blasting, Group 6 ; silane treatment after 4% HF etching, Group 7 ; silane treatment after blasting and 4% HF etching. In Each group, one half of 20 specimens was stored in distilled water at $37^{\circ}C$ for 24 hours and the other half was stored at atmosphere for 24 hours respectively. Dentin surface was etched with 10% $H_3PO_4$ for 15 seconds and luting cement(Variolink II, Vivadent, Liechtenstein) was applied by manufacturer's recommendation. Shear bond strength for each group was then measured. To examine the failure patterns after shear bond test and to observe the change after surface treatment of Targis. Specimens were fabricated and observed under the SEM. Statistical analysis was performed by One Way ANOVA test and t-test. The results were as follows ; 1. The shear bond strength of the groups stored in water significantly lower than that of groups stored at atmosphere (P<0.05). 2. There was no significant difference in shear bond strength in groups stored in water (P>0.05). 3. The shear bond strength without surface treatment of Targis were lowest among all experimental groups in atmosphere condition(P<0.05). 4. There was no significant difference in bond strength between groups using the silane or not(P>0.05). 5. The groups treated by blasting, hydrofluoric acid and silane sequentially showed highest bond strength than that of other groups in atmosphere condition, but there was no significant difference(P>0.05). 6 The proportions of the specimens showing the mixed fracture failure were 20% in HF etching group and blasting + HF group, 40% in blasting + HF + silane group in atmosphere condition. All the specimens stored in water showed adhesive fracture failure.

• Medical Lasers
• /
• 제9권2호
• /
• pp.142-149
• /
• 2020

Background and Objectives A picosecond-domain laser treatment using a microlens array (MLA) or a diffractive optical element elicits therapeutic micro-injury zones in the skin. This study examined the patterns of tissue reactions after delivering multiple pulses of 1,064-nm, MLA-type, picosecond neodymium:yttrium-aluminum-garnet laser treatment. Materials and Methods Multiple pulses of picosecond laser treatment were delivered to ex vivo human or brown micropig skin and analyzed histopathologically. A high-speed cinematographic study was performed to visualize the multiple pulses of picosecond laser energy-induced skin reactions in in vivo human skin. Results In the ex vivo human skin, a picosecond laser treatment at a fluence of 0.3 J/cm² over 100 non-stacking passes generated multiple lesions of thermally-initiated laser-induced optical breakdown (TI-LIOB) in the epidermis and dermis. In the ex vivo micropig skin, stacking pulses of 20, 40, 60, 80, and 100 at a fluence of 0.3 J/cm² generated distinct round to oval zones of tissue coagulation in the mid to lower dermis. High-speed cinematography captured various patterns of twinkling, micro-spot reactions on the skin surface over 100 stacked pulses of a picosecond laser treatment. Conclusion Multiple pulses of 1,064-nm, MLA-type, picosecond laser treatment elicit marked TI-LIOB reactions in the epidermis and areas of round to oval thermal coagulation in the mid to deep dermis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1528-1530
• /
• 1997

As device size shrinks, contamination will increasingly affect the reliability and yield of device. Therefore, contaminants must be removed from the surfaces of Si wafers prior to each process. But it becomes out increasingly difficult to clean silicon surfaces with finer patterns by the conventional wet treatment because of the viscosity and surface tension of solutions. Hence, a damage less dry cleaning process is needed for the silicon surfaces. For the removal of Si native oxide by UV-enhanced dry cleaning. $F_2$ gas and $F_2/H_2$ mixed gas were applied. As a result of analysis, UV-enhnaced $F_2/H_2$ treatment is more suitable than UV-enhanced $F_2$ treatment for removal of native oxide on the surfaces of Si wafers.

• Journal of the korean society of oceanography
• /
• 제35권3호
• /
• pp.153-157
• /
• 2000

Four different FITC-conjugated lectins were used to visually evaluate lectin binding activity by optical staining quality using confocal laser scanning microscopy (CLSM) of Cochzodinium polykrikoides in nature (wild type) and culture (cultured type). Cells from the field and cultures treated with ConA fluoresced only at the outer cell wall, and the abundance and distribution of the fluorescent signal were similar. Treatment with PWM and HPA did not elicit fluorescence at the cell surface, but the wild type exposed to HPA showed greater binding than did the cultured cells, possibly due to greater concentrations of glucosamine. The wild type cells treated with LBL lectin showed a strong green fluorescence on the cell surface, whereas cultured cells did not. Signal intensity and abundance were greater than for any other lectins tested in this study. These results suggest that wild type and cultured type are significantly different based on surface sugar production. In particular, the wild type cells apear richer in galactosamine-like moieties. Neither glucose nor mannose-like moieties were present in either wild types or cultured cells.