• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• Parasites, Hosts and Diseases
• /
• 제33권3호
• /
• pp.147-154
• /
• 1995

A new haplosplanchnid cercaria, Cercaria kuwaitae VI sp. n., was found in the prosobranch snail Cerithidea cincingulata in the Kuwait Bay Details are presented on the morphology and behavior of the cercaria and the encystment process. The new cercaria is a biocellate, distome, with a prominent single sac-like intestinal cecum extending well posterior to the ventral sucker and develops in simple sporocysts. It differs from known haplosplanchnid cercariae in the absence of finger-like processes on the tail, and the presence of V-shaped excretory vesicle extending beyond ventral sucker and the presence of cervical glands. The surface topography of the cercaria and its sporocyst is examined by scanning electron microscopy. This is the first haplosplanchnid cercaria to be described from a Cerithidea species.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.292-295
• /
• 2003

Moire topography method is a well-known non-contacting 3-D measurement method. the automatic 3-D measurement by moire topography has been required since the method was frequently applied to the engineering and medical fields. 3-D measurement using digital projection moire topography is very attractive because of its high measuring speed and high sensitivity. In this study, digital two-wavelength phase shilling moire is applied to the entertainment fields. recently. as promoting the growth of the VR-Game, display devices which attract public attention such as HMD or Projector are being appeared in order to deliver effectively the absorption sense. this study realized the Auto-calibrating system for arbitrary display surface using digital moire method which satisfied the shape measurement of display surface and the request of FOV(Field of View) output. also when large screen wasn't prepared, this auto-calibrating system was applied to enjoy games or movies at home with a projector and walls

• 지구물리와물리탐사
• /
• 제20권3호
• /
• pp.163-175
• /
• 2017

육상 탄성파 탐사에서 불규칙한 지표 고도차와 천부 지층의 풍화대는 자료의 반사파 신호를 왜곡시킨다. 그러므로 일반적인 육상 탄성파 탐사 자료는 정적 보정(static correction)을 통해 이러한 왜곡을 보정해야 한다. 정적 보정을 하기 위해 천부 지층의 속도가 필요하며, 이 속도는 굴절법 탐사를 통해 구할 수 있다. 그러나 육상 탄성파 탐사자료는 탐사 현장에 대한 허가나 현장 여건 그리고 장비 보유 현황에 따라 제한된 형태로 취득되는 경우가 많다. 이러한 상황에서는 송수신기 배열이 제한되어 굴절법 탐사에 적합한 자료를 얻을 수 없기 때문에 반사법 자료로 굴절법 해석을 수행할 수 밖에 없다. 따라서 본 연구에서는 불규칙 지표 모델에서 제한된 송수신기 배열을 이용하여 얻은 반사법 자료로 굴절 주시 역산을 수행하고 결과의 신뢰성을 분석하였다. 불규칙한 지표와 평탄한 지표를 갖는 모델에 대한 역산 결과를 비교하여 지표 고도 차이가 역산 결과의 신뢰성에 약간의 영향을 주는 것을 확인하였다. 또한, 송신원 개수에 따른 역산을 통해 극히 적은 수의 송신원이 아니라면 역산 결과의 신뢰성에 크게 영향을 주지 않음을 보였다. 반면에 제한된 배열의 수신기를 사용할 경우에는 수신기 전개영역의 중첩된 부분에서 속도왜곡이 발생함을 관찰하였고, 속도왜곡이 발생하지 않기 위한 최소 중첩영역의 크기를 제안하였다. 마지막으로 현장 자료의 지형 조건과 송수신기 배열 정보를 이용하여 수치 모형 실험을 수행하였고, 신뢰성 분석 결과를 검증하였다. 신뢰성 분석 결과를 토대로 현장 자료 역산 결과에 신뢰할 수 있는 영역과 해석에 유의해야 할 영역을 구분하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1508-1510
• /
• 1998

Recent development of scanning probe microscope techniques has made it possible to investigate, not only microscopic surface topography, but also physical and chemical properties on the nanometer-scale. The scanning Maxwell-stress microscopy (SMM) is surface characterization tool capable of mapping both the surface topography and electrical properties, such as surface potential, surface charge dielectric constant of thin films with a nanometer-scale resolution by means of the AC voltage driven oscillation of metal coated cantilever. In this study, we observed the surface potential distribution and molecular ordering in thin films. We have demonstrated that the SMM can be used for imaging surface potential distribution over the film surface and also be used for detecting surface changes in thin films. This is first step towards the understanding of electrical phenomena in organic and inorganic materials, biological system with SMM.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.136-145
• /
• 1999

This paper describes the surface roughness effect in parallel thrust bearing. In mixed lubrication, some contacts will take place between asperities, and partial lubrication will occur. An average Reynolds Equation is utilized to determine effects of surface roughness on partially lubricated contacts. By using an autocorrelation function for the surface profile, surface model is generated numerically Although the two surfaces are parallel in thrust bearing separated by thin film, the pressure peak is formed due to asperites. By means of surface profile parameters, it is shown that which surface is optimal for the parallel thrust bearing.

• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.25-33
• /
• 2002

Effect of surface topography on the water wetting nature and micro/nano tribological characteristics of Si-wafer and PTFE was experimentally studied. The ion beam treatment was performed with a hollow cathode ion gun in different argon don dose conditions in a vacuum chamber to change the surface topography, Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribo tester, SPM (scanning prove microscope), contact anglemeter and profilometer, respectively. Results showed that surface roughness increased with the argon ion dose. The water wetting angle of tile ion beam treated samples also increased with the ion dose. Results also showed that micro-adhesion and micro-friction depend on the wetting characteristics of the PTFE samples. However, nano-triboloSical characteristics showed little dependence on the wetting angles. The water wetting characteristics of modified PTFE samples were discussed in terms of the surface topographic characteristics.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1925-1930
• /
• 2006

흐름의 연직분포를 가정하여 수면에서 바닥까지 적분하여 평균화한 방정식에 기초한 준2차원 흐름모형을 연안해역에서의 취송류해석을 위해 적용되었다. 바람장의 변동에 따른 취송류장의 변동이 크게 나타나므로 본 연구에서는 육상지형의 영향을 고려할 수 있는 3차원 중규모 지역기상장 모형을 통해 연안해역에서의 시간에 따른 바람장변동을 수치해석 하였다. 육상에서의 지표면 열수지 변화를 위해 식생모델을 적용하였다. 기상장과 취송류 해석을 위한 수치모형실험결과 바람장의 변동에 따른 연안역에서의 흐름특성을 효과적으로 예측하고 있음을 확인하였다.