• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.649-652
• /
• 2006

This paper describe the performance of seawater purification, to which living organisms can adapt, and the physical properties of porous concrete with continuous void. Although conventional concrete has been regarded as a destroyer of nature, seawater and air can pass freely through concrete when it is made porous by forming continuous void. This not only enables plants to vegetables, but also makes it possible for microscopic animals and plants, including bacteria, to attach to and inhabit uneven surface as well as internal voids when the concrete is provided in a natural seawater area or seawater side area. As a result, porous concrete using recycled aggregate improved the performance of seawater purification. In this study, The performance of seawater purification of porous concrete using recycled aggregate analyzed by T-P, T-N.

• 보존과학회지
• /
• 제28권4호
• /
• pp.329-341
• /
• 2012

마애화령석지장은 해안가에 인접해 있고 해수에 의해 주기적으로 일정 부분이 침수되는 특수한 입지적 조건에 있다. 마애불을 구성하는 암석은 중립질 또는 조립질을 띠는 흑운모화강암으로 내구성이 강한 편이나, 암석 내부에 침투한 염용액과 주변 환경과의 복잡한 상호작용에 의해 구성암석의 색과 강도 및 내구성 등 물성이 변화된 상태이다. 마애불을 이루는 암석은 염(NaCl)결정화 작용에 의한 표면층 박리박락이 심각하다. 박리박락(14.6%)은 해수의 주요 경계면을 중심으로 대기에 상시 노출되는 상부에 집중되어 있다. 반면, 해수에 의해 주기적으로 침수되는 암괴 하부는 오염물이 침착되어 흑화층을 나타내며 이와 함께 갈색변색과 생물오염이 중첩된 상태이다. 표면 오염 및 변질은 흑색 변색(29.2%), 황색 변색(14.1%), 갈색 변색(4.4%), 녹색 변색(2.9%)의 순으로 높은 훼손율(50.5%)을 나타냈다. 또한 해수면을 경계로 상부가 해수에 침수되는 하부보다 초음파 속도가 낮고 편차가 커 많은 물성 변화가 있었음을 알 수 있으며, 특히 해수 침투 경계면의 표면 물성이 취약함을 확인하였다.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.176-182
• /
• 2018

Corrosion of the Cu alloy with 10wt% Ni in stagnant seawater with residual free chlorine was investigated. Despite that fact that Cu alloys are widely used for seawater applications due to their stubborn resistance to chloride attack, not much is known as to how the residual free chlorine in seawater affects corrosion of Cu and its alloys. In this work, immersion tests were conducted in the presence of different levels of chlorine for 90-10 Cu-Ni samples, one of the most frequently used Cu alloys for seawater application, mostly in shipbuilding. The results revealed no evidence for accelerated corrosion of the Cu-Ni alloy even in the presence of 5 ppm residual chlorine in seawater, signifying that the Cu-Ni alloy can be more tolerant to residual chlorine that has been commonly cited by the shipbuilding industry. However, comparison of polarization behavior of the alloy samples in the presence of different electrolytes with different concentrations of residual chlorine suggests that higher concentration of chlorine could increase the corrosion rate of the Cu-Ni alloy. Furthermore, it is suggested that microorganisms in the seawater could increase the corrosion rate of the Cu-Ni alloy by encouraging exfoliation of the corrosion product off the metal surface.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.39-43
• /
• 2009

A flow and low temperature of deep seawater the biofouling properties in a seawater environment of different materials, such as a steel pipe, polyethylene pipe, and nylon net, used for ocean industries. Experiments in a real sea environment were performed to grasp the quantitative and qualitative biofouling from diatoms attached to materials by measuring the Chlorophyll-a density. Experimental samples were placed under five types of ocean environmental conditions and analyzed every month for five months. It is shown that the biofouling by diatoms was strongly affected by the seawater temperature for all of the experimental samples. It was found that diatoms mainly adhered to the nylon net, while crustaceans prefer polyethylene, under a high temperature condition. It is believed that the biofouling properties are strongly related to the surface roughness of a material. The biofouling under the low temperature condition of deep seawater was rare and stable for the experimental periods. The inside of a pipe conveying deep seawater can be presumed to remain clear without biofouling on the condition of a flow and low temperature of deep seawater.

• 지구물리와물리탐사
• /
• 제3권3호
• /
• pp.101-111
• /
• 2000

임해지역에서의 해수침투 평가를 위하여 서로 다른 수리지질학적 특성을 갖고 있는 3개의 연구지역, 9개의 시추공에서 전자유도검층, 공내수의 온도 및 전기전도도검층, 자연감마선검층을 수행하였다. 지표 물리탐사 이외에 물리검층을 추가로 활용함으로써 3개 연구지역의 해수침투와 관련된 지질학적 특성을 해석하는데 큰 도움을 얻을 수 있었다. 즉, 해수침투 평가에 물리검층을 활용함으로써 지표 물리탐사자료 해석의 정확성을 높일 수 있고, 지하수의 장기 모니터링을 위한 최적심도를 알아 낼 수 있으며, 지층의 투수성 여부에 관한 수리지질학적 단위를 구분할 수 있음을 보였으며 그밖에 물리검층 모니터링의 적용성에 대하여도 예시하였다. 시추공내 염수의 영향을 비교적 작게 받으면서 지층의 전기비저항을 측정하고, PVC 케이싱이 설치된 소구경의 시추공 내에서도 공극율을 측정할 수 있는 방법이 모색되면 물리검층으로 보다 정량적인 해수침투 관련 정보를 얻을 수 있을 것이다.

• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.105-121
• /
• 2011

본 연구에서는 시화호의 수질 관리 정책 연구를 위한 최근의 수질 자료 확보를 목적으로 2010년에 시화호 내 외측 해역에서 수질 조사를 수행하였다. 시화호 표층수 수질항목들의 수평적 농도분포는 하천을 통한 담수 유업과 배수갑문을 통한 외해수 유입의 영향으로 인하여 반윌 및 시화 산단 얀근 상류지역에서는 높고 배수갑문으로 갈수록 낮아지는 경향을 나타냈다. 시화호 외해에서는 TN 및 TP가 소래포구에 가까운 곳에서 높은 농도를 나타내었으며, 전체적으로 시화호 내해보다는 상대적으로 낮은 농도를 나타내었다. 시화호 내측의 경우, 여름철 성층 형성 및 저층의 활발한 유기물 분해로 빈산소층이 발달되고 있었다. 수질항목들의 수직적 농도분포의 경우, 용존영양염, TN 및 TP는 표층보다 저층에서 높았지만, COD, 클로로필-a 및 POC는 이와 반대로 저층보다 표층에서 높은 분포를 나타냈다. 시화호 표층수에서 염분은 용존영양염과 양호한 음의 상관성을 보여 담수 기원의 영양염 공급이 확인되었고, 이에 의한 식물플랑크톤의 대증식으로 COD 및 POC가 높게 나타났다.

• Ocean Science Journal
• /
• 제43권4호
• /
• pp.223-232
• /
• 2008

In order to determine the temporal and spatial variations of nutrient profiles in the shallow pore water columns (upper 30 cm depth) of intertidal sandflats, we measured the salinity and nutrient concentrations in pore water and seawater at various coastal environments along the southern coast of Korea. In the intertidal zone, salinity and nutrient concentrations in pore water showed marked vertical changes with depth, owing to the active exchange between the pore water and overlying seawater, while they are temporally more stable and vertically constant in the sublittoral zone. In some cases, the advective flow of fresh groundwater caused strong vertical gradients of salinity and nutrients in the upper 10 cm depth of surface sediments, indicating the active mixing of the fresher groundwater with overlying seawater. Such upper pore water column profiles clearly signified the temporal fluctuation of lower-salinity and higher-Si seawater intrusion into pore water in an intertidal sandflat near the mouth of an estuary. We also observed a semimonthly fluctuation of pore water nutrients due to spring-neap tide associated recirculation of seawater through the upper sediments. Our study shows that the exchange of water and nutrients between shallow pore water and overlying seawater is most active in the upper 20 cm layer of intertidal sandflats, due to physical forces such as tides, wave set-up, and density-thermal gradient.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.172-177
• /
• 2016

In this paper, various electrochemical experiments were conducted in seawater solution to evaluate corrosion damage behavior of arc thermal sprayed Inconel 625 coating on SS400 steel in marine environment. As a result, corrosion damages of thermal sprayed Inconel 625 coating preferentially occurred at the defect area, and they were observed as a form of pitting corrosion in the galvanostatic experiments. In Tafel analysis, corrosion current density of Inconel 625 coating was relatively high due to influence of interconnected pores and Cr oxides in the thermal spray coating layer. On the other hand, the result of the potential measurement, thermal sprayed Inconel 625 coating should need the post-treatment which can compensate the defects like pores and cracks because Inconel 625 coating presented a higher potential of about 290 mV than that of the SS400 steel.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.57-65
• /
• 1999

The in situ observations and the seawater analyses were conducted at all seasons from July 1996 to April 1999 for the purpose of describing the characteristics of seasonal variations of water quality in Mokpo harbour, Korea. Vertical stratification started to be formed in water column in spring, developed in summer and disappeared in fall. In summer, vertical density distribution of water column was found to be in stable structure with lower temperature and higher salinity of bottom water, and the vertical mixing of water between surface and bottom layers was restricted. In winter, however, surface water was found to be similar to bottom water in temperature and salinity, and water column was in unstable structure and in well-mixed condition between surface and bottom waters. The saturation percentage of dissolved oxygen(DO) in bottom water of inner part of Mokpo harbour at all seasons was shown to be decreased to the third grade or under the third grade of Korean standards of seawater quality. In particular, dissolved oxygen was oversaturated in surface water and undersaturated in bottom water in summer, due to stratification and organic pollution. The difference of DO concentration between surface and bottom waters was found to be greater in spring and summer than in fall and winter, due to stratification and photosynthesis of phytoplankton. The concentrations of chemical oxygen demand(COD) over the entire waters of Mokpo harbour were found to fluctuate from below the third grade to the first grade of Korean standards through all seasons and COD concentrations of same seasons were shown to be different year after year. In particular, in view of COD, the annual average seawater quality of Mokpo harbour was evaluated to be in third grade of Korean standards, due to organic pollution. The average COD of surface water was greater than that of bottom water in spring and summer, due to the autochthonous COD caused by production of phytoplankton in surface waters, while the average COD of surface water was similar to that of bottom water in fall and winter, due to the vertical mixing of water between surface and bottom layers.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.219-226
• /
• 2020

This paper investigated the characteristics of anodized aluminum 6061-T6 alloy for corrosion and stress corrosion cracking(SCC) under natural seawater. The hard anodizing oxide film formed on the 6061-T6 was a uniform thickness of about 25 ㎛. The corrosion characteristics were performed with a potentiodynamic polarization test. SCC was characterized by a slow strain rate tensile test under 0.005mm/min rate. As a result, the anodizing film showed no significant effect on SCC in the slow strain rate test. However, the corrosion current density of base metal was measured to be approximately 13 times higher than that of the anodized specimen. Therefore, the anodizing film significantly improved the corrosion resistance of 6061-T6 alloy in natural seawater.