• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.559-562
• /
• 2003

The results and discussions of surveyed case site at constructed steel pile in potential acid sulfate soil were as follows. Topography at surveyed site was local alluvial valley and that site soils was classified as BanGog and YuGye series as detailed soil surveyed results in RDA and soil texture was Clay/Clay Loam. Soils pH was neutral, which was average 7.5 but much decreased to average 4.2 after $H_2O_2$ treatment. Organic matter and sulfate ions contents were very rich. The corrosion was severe at ground water fluctuation depth. Deposits colored black were attached to steel pile surface, which because of violent reaction in treatment HCI solution, were guessed as corrosion products (FeS) reduced by sulfate reducing bacteria(SRB). Consequently, main cause was thought microbiologically induced corrosion at this site where there is ground water fluctuation occurring oxidation and reduction reactions in turn and the soil is potential acid sulfate soil.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.489-496
• /
• 2015

In this study, novel $Ag_2Se$ sensitized $TiO_2$ nanocomposites were prepared by facile sonochemical assisted synthesis method. The as-prepared products were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM), and N2 adsorption BET analysis. The as-prepared $Ag_2Se/TiO_2$ nanocomposites simultaneously possessed great adsorptivity for organic dyes and efficient charge separation properties. In the decolorization of rhodamine B, a significant enhancement in the reaction rate was observed for the $Ag_2Se/TiO_2$ nanocomposite compared to the cases of using pure P25 or $TiO_2$. The sonocatalysis activity was higher due to the greater formation of reactive radicals, as well as to the increase of the active surface area of the $Ag_2Se/TiO_2$ nanocomposite.

• Journal of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.199-205
• /
• 1981

7-Alkyl-1-carboxyphenazine derivatives, bearing butyl or octyl group, were synthesize by the reaction of anthranilic acid with 3-nitroalkylbenzene, prepared from aniline and alcohols as starting materials through alkylation of 3-nitro-4-aminoalkylbenzene. And the products were also identified by elementary analysis, IR and NMR spectra. Surface tension of these derivatives in aqueous solution was determined. And also Antibiotic activity of these derivatives was tested, using Gram positive and negative bacillus and fungi. It showed that the antibiotic activity of these alkyl-substituted 1-carboxyphenazine derivatives was stronger than that of the 1-carboxyphenazine.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.43-50
• /
• 1999

The planarized $SiO_2$ particles were prepared by two-step reduction method of making much smaller particles, micron-sized ones, to improve spreadability, adherence, and smoothness. Various pigments known as flaky extender usually have terrace layers on their surfaces, but $SiO_2$ particles in this study exhibit a smooth surface structure. These single $SiO_2$ particles were used as core particles to prepare the composite particles coated with ultra fine $TiO_2$ particles by a homogeneous precipitation method. The thickness and the morphology of the deposited $TiO_2$ layers could be modified by adjusting the reactant concentrations, the reaction time and the temperature. The characteristics of $SiO_2/TiO_2$ composite in the field of color cosmetics are to give an UV-cut effect and to enhance the chroma of human skin color, one of optical properties.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.43-50
• /
• 1999

The planarized SiO$_2$ particles were prepared by two-step reduction method of making much smaller particles, micron-sized ones, to improve spreadability, adherence, and smoothness. Various pigments known as flaky extender usually have terrace layers on their surfaces, but SiO$_2$ particles in this study exhibit a smooth surface structure. These single SiO$_2$ particles were used as core particles to prepare the composite particles coated with ultra fine TiO$_2$ particles by a homogeneous precipitation method. The thickness and the morphology of the deposited TiO$_2$ layers could be modified by adjusting the reactant concentrations, the reaction time and the temperature. The characteristics of SiO$_2$/TiO$_2$ composite in the field of color cosmetics are to give an UV-cut effect and to enhance the chroma of human skin color, one of optical properties.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.131-136
• /
• 2010

Iron aluminophosphates (FeAlP) with different percentage of iron were synthesized and characterized for their surface and bulk properties. The catalytic activity was determined in the transesterification of diethyl malonate with benzyl alcohol. Benzyl ethylmalonate and dibenzyl malonate were obtained as the only products. FeAlP with 0.025 mole % of iron was found to be distinctly different in its textural and catalytic properties. Formation of diester was found to be favored by the acid sites of intermediate strength. The presence of hydrated alumina and the polycondensed phosphates in the materials reduced the catalytic activity of iron aluminophosphates in transesterification reaction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.434-437
• /
• 2005

Chemical Mechanical Polishing (CMP) has become an essential step in the overall semiconductor wafer fabrication technology. In general, CMP is a surface planarization method in which a silicon wafer is rotated against a polishing pad in the presence of slurry under pressure. The polishing pad, generally a polyurethane-based material, consists of polymeric foam cell walls, which aid in removal of the reaction products at the wafer interface. It has been found that the material removal rate of any polishing pad decreases due to the so-called 'pad glazing' after several wafer lots have been processed. Therefore, the pad restoration and conditioning has become essential in CMP processes to keep the urethane polishing pad at the proper friction coefficient and to allow effective slurry transport to the wafer surface. Diamond pad conditioner employs a single layer of brazed bonded diamond crystals. Due to the corrosive nature of the polishing slurry required in low pH metal CMP such as copper, it is essential to minimize the possibility of chemical interaction between very low pH slurry (pH <2) and the bond alloy. In this paper, we report an exceptional protective coated conditioner for in-situ pad conditioning in low pH Cu CMP process. The protective Cr-coated conditioner has been tested in slurry with pH levels as low as 1.5 without bond degradation.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.99-106
• /
• 2001

A laboratory experiment was performed to investigate phosphorus and nitrogen removal from synthetic wastewater by intermittently activated sludge process packed with aluminium plate. Three continuous experimental systems, I. e. an intermittently activated sludge process(Run A), an intermittently activated sludge process with an aluminium plate packed into the reactor(Run B), and a reactor post stage(Run C) were compared. In the batch experiments, the phosphorus removal time in the reactor packed with copper and aluminium plate simultaneously was faster than that of the reactor packed with only an aluminium plates. However, the reactor packed with only an aluminium plate could be used for phosphorus removal. Move phosphorus was removed with an increase of surface area of aluminium plate and electrolysis(NaCl) concentration. The efficiency of COD and nitrogen removal was not affected in Run B. However, the phosphrus removal efficiency decreased because of reaction products and activated sludge which gradually covered gradually the surface of the aluminium plate. The efficiency of phosphorus removal in Run C was 86.3% at the HRT of 3.2 hours. Especially, the efficiency of phosphorus removal in Run C was higher than that in Run B.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.945-952
• /
• 2012

The sorption of selenium ions onto iron and iron compounds as a disposal container material and its corrosion products, and onto bentonite as a buffer material, was studied to understand the behaviors of selenium in a waste repository. Selenite was sorbed onto commercial magnetite very well in solutions at around pH 9, but silicate hindered their sorption onto both magnetite and ferrite. Unlike commercial magnetite and ferrite, flesh synthesized magnetite, green rust and iron greatly decreased selenium concentration even in a silicate solution. These results might be due to the formation of precipitates, or the sorption of selenide or selenite onto an iron surface at below Eh= -0.2 V. Red-colored Se(cr) was observed on the surface of a reaction bottle containing iron powder added into a selenite solution. Silicate influences on the sorption onto magnetite and iron for selenide are the same as those for selenite. Even though bentonite adsorbed a slight amount of selenite, the sorption cannot be ignored in the waste repository since a very large quantity of bentonite is used.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.385-390
• /
• 2002

Laccase could be successfully assembled on an amine-derivatized platinum electrode by glutaraldehyde coupling. The enzyme layer formed on the surface does not communicate electron directly with the electrode, but the enzymatic activity of the surf ace could be followed by electrochemical detection of enzymatically oxidized products. The well-known laccase substrates, ABTS (2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)) and PPD (p-phenylenediamine) were used. ABTS can be detected down to 0.5 ${\mu}M$ with linear response up to 15 ${\mu}M$ and current sensitivity of 75 nA/ ${\mu}M.$ PPD showed better response with detection limit of 0.05 ${\mu}M$, linear response up to 20 ${\mu}M$, and current sensitivity of 340 nA/ ${\mu}M$ with the same electrode. The sensor responses fit well to the Michaelis-Menten equation and apparent $K_M$ values are 0.16 mM for ABTS and 0.055 mM for PPD, which show the enzymatic reaction is the rate-determining step. The laccase electrode we developed is very stable and more than 80% of initial activity was still maintained after 2 months of uses.