• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1812-1814
• /
• 1999

The effects of polarity of the polymer on transcription-aligned twisted nematic (TN)-liquid crystal display (LCD) on various the polyimide (PI) surfaces were investigated. The monodomain alignment of nematic (N)LC is obtained in cells fabricated by transcription alignment method on PI surface with medium polarity. The LC alignment using transcription alignment method is attributed to polarity of the polymer. The threshold voltage of transcription-aligned TN-LCD decreases with increasing the polarity of the polymer on three kinds of the PI surfaces. The threshold voltage of transcription-aligned TN-LCD on PI surface with high polarity is almost the same compared to rubbing-aligned TN-LCD. The response time of transcription-aligned TN-LCD decreases with the increasing the polarity of the polymer on all PI surfaces. The decay time of transcription-aligned TN-LCD is slow compared with the rubbing-aligned TN-LCD.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.300-306
• /
• 2011

본 연구는 편극 패턴된 강유전체 단결정 $LiNbO_3$ (0001) 기판에 광화학적 환원반응을 이용하여 금속(Au, Ag) 나노입자를 증착시키고, 금속 입자의 종류와 표면의 극성에 따른 나노입자의 표면 분포를 원자간력현미경(AFM)으로 조사하였다. 전극 인가에 의해 주기적으로 편극 패턴된 강유전체 단결정 $LiNbO_3$ (periodically polarity-patterned $LiNbO_3$: PPLN)을 기판으로 사용하였으며, PPLN의 각 영역의 편극 방향은 Piezoresponse force microscopy로 확인하였다. 금속(Ag, Au) 나노 입자는 금속이 포함된 수용액에 PPLN 기판을 넣고, 자외선 램프로 30초에서 3분간 노출시켜 광환원 반응으로 기판에 증착시켰다. 시료 성장후, 공기 중에서 AFM을 이용하여 나노입자의 형태, 크기, 및 표면분포를 조사하였다. Ag 입자의 경우, -Z 편극 영역보다 +Z 편극 영역에 크고 밀도가 높은 나노 입자가 증착되었으며, 특히 편극 경계 부분에 가장 큰 Ag 나노입자가 증착되어, 나노선 모양으로 성장됨이 확인되었다. 그러나 Au 입자의 경우는 편극 경계부분에 입자가 증착되는 경향이 없었다. 두 입자 모두 자외선 노출시간이 증가함에 따라, 증착된 나노입자의 크기는 증가하는 경향을 보였다. 이와 같이 증착된 금속 나노입자가 강유전체의 표면편극에 따라 다른 분포로 성장되는 것을 강유전체 표면 극성에 따른 표면 밴드구조 변화, 광전 효과 및 표면의 전기장의 불균일성에 의한 수용액 속의 금속 양이온과 자외선에 의해 생성된 전자와의 광화학적 반응에 대한 모델로 논의할 것이다.

• 천문학회지
• /
• 제52권4호
• /
• pp.89-97
• /
• 2019

We demonstrate the subsurface origin of the observed evolution of the solar active region 10930 (AR10930) associated with merging and breakup of magnetic polarity regions at the solar surface. We performed a magnetohydrodynamic simulation of an emerging magnetic flux tube whose field-line twist is asymmetrically distributed along its axis, which is a key to merging and fragmentation in this active region. While emerging into the surface, the flux tube is subjected to partial splitting of its weakly twisted portion, forming separate polarity regions at the solar surface. As emergence proceeds, these separate polarity regions start to merge and then break up, while in the corona sigmoidal structures form and a solar eruption occurs. We discuss what physical processes could be involved in the characteristic evolution of an active region magnetic field that leads to the formation of a sunspot surrounded by satellite polarity regions.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.61-68
• /
• 2019

Only the power is converted from AC to DC, in accordance with IEC 60587 based test method, in order to develop the LSR(Liquid Silicone Rubber) insulator material for HVDC, the experiment of Inclined Plate Tracking and Erosion Resistance was conducted. A contaminant (2.5 mS/cm: ammonium chloride) was applied at a rate of 0.3 ml/min and a voltage of ${\pm}3.5kV$, and was evaluated on the basis of 60 mA/2s. The samples were prepared by dispersing LSR/Nano silica_25wt% Composites in LSR. The erosion phenomena of surface discharge and tracking due to DC polarity and negative polarity were measured by image, leakage current maximum and thermal camera. The thermal imaging camera measured the surface temperature generated by the joule heat of the leakage current due to the drying discharge and the conductive current. After the measurement, the tracking and erosion mechanisms were evaluated for erosion weight, erosion depth and erosion length. Positive and negative polarity of LSR/Nano Silica_25wt% composite Tracking and erosion results show that positive polarity is more severe than negative polarity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.27-30
• /
• 1997

We investigated the electro-optical characteristics of amorphous (a) - twisted nematic (TN) - liquid crystal display (LCD) on polyimide (Pl) films with different polarity. It was found that the threshold voltage of a-TN-LCD is decreased with increasing the polarity of the Pl film. We considered that the threshold voltage in a-TN-LCD is affected to the surface anchoring strength with polarity of the Pl films. Also, we observed the response time of a-TN-LCD on medium polarity of the Pl film is fast compared to high polarity of the Pl film. Finally, we obtained that the viewing angle of a-TN-LCD are almost same on different polarity of the PI films.

• 전자공학회논문지 IE
• /
• 제44권3호
• /
• pp.6-11
• /
• 2007

본 연구는 플라즈마 처리한 고분자 복합재료 표면의 접촉각, X-선광전자분광법(XPS) 및 코로나 대전에 의한 표면 정전특성을 분석하여 발생된 화학적 변화와 정전적 특성 변화를 고찰하여 열화 메커니즘을 도출하였다. 플라즈마 처리된 시료의 접촉각 및 표면전위는 표면에 카르복실기 라디칼을 포함하는 다량의 측쇄화가 집중적으로 발생되어 처리시간에 따라 급격한 친수화가 진행되었다. 플라즈마 처리로 인한 화학적 변화에서 표면에 carboxyl 라디칼이 주로 형성되면서 급격히 표면 친수화로 변화하였다. 정전변화를 분석한 전위감쇠 결과에서 미처리 시료는 부극성 표면을 나타내었으나, 친수화 표면은 carboxyl 라디칼(-COO*)을 포함하는 정극성 라디칼로 인해 정극성 표면으로 변화하여 부극성 전하가 빠르게 감소하였다.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.154-160
• /
• 2008

We investigated molecular polarity by using theoretical means and comparing empirical solvent polarity. Our approach employed electrostatic potentials at the molecular surface calculated by density functional methods. A number of molecular descriptors related to molecular polarities were computed from molecular surface electrostatic potentials. Among computed molecular descriptors, the most positive electrostatic potential provided the best correlation with the empirical solvent polarities. A regression equation was developed in order to predict molecular polarities of molecules whose experimental solvent polarities were unknown. The new regression equations were utilized in estimating solvent polarities of cubane derivatives which are considered important precusors of high-energy density meterials.

• International Journal of Oral Biology
• /
• 제37권4호
• /
• pp.181-188
• /
• 2012

As the demand for large-scale analysis of gene expression using DNA arrays increases, the importance of the surface characterization of DNA arrays has emerged. We compared the efficiency of molecular biological applications on solid-phases with different surface polarities to identify the most optimal conditions. We employed thiol-gold reactions for DNA immobilization on solid surfaces. The surface polarity was controlled by creating a self-assembled monolayer (SAM) of mercaptohexanol or hepthanethiol, which create hydrophilic or hydrophobic surface properties, respectively. A hydrophilic environment was found to be much more favorable to solid-phase molecular biological manipulations. A SAM of mercaptoethanol had the highest affinity to DNA molecules in our experimetns and it showed greater efficiency in terms of DNA hybridization and polymerization. The optimal DNA concentration for immobilization was found to be 0.5 ${\mu}M$. The optimal reaction time for both thiolated DNA and matrix molecules was 10 min and for the polymerase reaction time was 150 min. Under these optimized conditions, molecular biology techniques including DNA hybridization, ligation, polymerization, PCR and multiplex PCR were shown to be feasible in solid-state conditions. We demonstrated from our present analysis the importance of surface polarity in solid-phase molecular biological applications. A hydrophilic SAM generated a far more favorable environment than hydrophobic SAM for solid-state molecular techniques. Our findings suggest that the conditions and methods identified here could be used for DNA-DNA hybridization applications such as DNA chips and for the further development of solid-phase genetic engineering applications that involve DNA-enzyme interactions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1579-1581
• /
• 1997

We investigated the effect of polarity of polyimide(PI) film in amorphous (a) - twisted nematic (TN) - liquid crystal display(LCD) for response time and viewing angle. We found that the domain size of a-TN-LCD on PI film with high polarity is smaller then medium polarity. It is considered that the electro-optical characteristics are strongly dependent on this domain in a-TN-LCD. We observed the response time of a-TN-LCD on PI film with high polarity is slow as comparing to PI film with medium polarity. We suggest that the response time of a-TN-LCD is attributed surface effect between the LCs and the substrates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.46-50
• /
• 1996

Die sinking Electrical Discharge Machining(EDM) of TiC/Al$_2$O$_3$Ceramic Matrix Composite(CMC) was conducted for positive and negative polarity according to the change of current and Duty Factor(DF). Also FEM analysis about temperature distribution of workpiece by one spark was executed. Maximum surface roughness( R$_{max}$ ) and SEM photographs of the EDMed surface for different conditions were evaluated. Higher Material Removal Rate(MRR) was obtained for negative polarity than positive one. Better surface morphology was found as the current is decreased, but the MRR was also decreased. From the SEM photographs, the size of melt cavity due to one spark is about 100 to 150${\mu}{\textrm}{m}$ in diameterer