• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.63-69
• /
• 2008

It has an important meaning that the maintenance and management of facility for a onshore construction shall be damaged by oceanic environment. A movement and displacement of these shall be investigated by up-to-date machinery tools like GPS and Lidar and MBES & Gyro. In current a lot of tools and methods for investigation shall be used as a displacement and movement on land mainly. For underwater facility it is very difficult to check because of special conditions below the water surface. In this study, a surveying methods for a movement and displacement of underwater facility as caisson shall be used, i.e. multibeam-echo-sounding system. A possibility as basic data for displacement and environmental monitoring shall be studied by MBES to acquire a caisson's inclination.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2009

Present studies of these experiments was conducted to using water, over a range of cross-flow velocities from 42 to 136 m/s, with injection frequencies from 35.7 to 166.2 Hz. In cross-flow field, main parameters of liquid jet for secondary breakup were cross-flow drag rather than pressure pulse frequency. As oscillation of the periodic pressure, liquid jet was moved up and down. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. Because of pressure pulsation frequency, an inclination of SMD for the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. The tendency of volume flux value for various frequency of pressure pulse was same distribution. And volume flux was decreased when the frequency of pressure pulse increasing.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.16-23
• /
• 2003

The study was performed to obtain basic data for high quality timber production and efficient utilization of woods by investigating the effects of thinning on timber quality of domestic Korean pine(Pinus koraiensis Sieb. et Zucc.) planted. The results of this study were summarized as follows ; Comparing the appearance of knot per one meter on log surface, the heavy thinned trees contained less knots than non-thinned ones. And the ratio of dead knots was decreased in heavy thinned trees compared with the non-thinned ones, but the knot size was increased. The inclination angle of dead knot is larger than that of live knot. The crooked logs in heavy thinning plot appeared less than those in non-thinning plot. In heavy thinning plot, the log circle percentage of cross section and the ratio of clear lumber were increased, compared with in non-thinning one. The grade of log was the highest in heavy thinning plot.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.313-323
• /
• 2022

Objective: This study aimed to estimate the clinical effects of different types of bone-anchored maxillary protraction devices by using a network meta-analysis. Methods: We searched seven databases for randomized and controlled clinical trials that compared bone-anchored maxillary protraction with tooth-anchored maxillary protraction interventions or untreated groups up to May 2021. After literature selection, data extraction, and quality assessment, we calculated the mean differences, 95% confidence intervals, and surface under the cumulative ranking scores of eleven indicators. Statistical analysis was performed using R statistical software with the GeMTC package based on the Bayesian framework. Results: Six interventions and 667 patients were involved in 18 studies. In comparison with the tooth-anchored groups, the bone-anchored groups showed significantly more increases in Sella-Nasion-Subspinale (°), Subspinale-Nasion-Supramentale(°) and significantly fewer increases in mandibular plane angle and the labial proclination angle of upper incisors. In comparison with the control group, Sella-Nasion-Supramentale(°) decreased without any statistical significance in all treated groups. IMPA (angle of lower incisors and mandibular plane) decreased in groups with facemasks and increased in other groups. Conclusions: Bone-anchored maxillary protraction can promote greater maxillary forward movement and correct the Class III intermaxillary relationship better, in addition to showing less clockwise rotation of mandible and labial proclination of upper incisors. However, strengthening anchorage could not inhibit mandibular growth better and the lingual inclination of lower incisors caused by the treatment is related to the use of a facemask.

• Structural Engineering and Mechanics
• /
• v.83 no.4
• /
• pp.415-433
• /
• 2022

Eighteen (18) (120×300×2200 mm) beams were prepared and tested to evaluate the shear strength of Glass Fiber Reinforced Concrete (GFRC) beams with no shear reinforcement, and evaluate the effectiveness of various innovative strengthening systems to increase the shear capacity of the GFRC beams. The test variables are the amount of discrete glass fiber (0.0, 0.6, and 1.2% by volume of concrete) and the type of longitudinal reinforcement bars (steel or GFRP), the strengthening systems (externally bonded (EB) sheet, side near-surface mounted (SNSM) bars, or the two together), strengthening material (GFRP or steel) links, different configurations of NSM GFRP bars (side bonded links, full wrapped stirrups, side C-shaped stirrups, and side bent bars), link spacing, link inclination angle, and the number of bent bars. The experimental results showed that adding the discrete glass fiber to the concrete by 0.6%, and 1.2% enhanced the shear strength by 18.5% and 28%, respectively in addition to enhancing the ductility. The results testified the efficiency of different strengthening systems, where it is enhanced the shear capacity by a ratio of 28.4% to 120%, and that is a significant improvement. Providing SNSM bent bars with strips as a new strengthening technique exhibited better shear performance in terms of crack propagation, and improved shear capacity and ductility compared to other strengthening techniques. Based on the experimental shear behavior, an analytical study, which allows the estimation of the shear capacity of the strengthened beams, was proposed, the results of the experimental and analytical study were comparable by a ratio of 0.91 to 1.15.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.1-8
• /
• 2023

Marine and hydraulic structures are subject to durability damage not only due to the penetration of sea water but also due to the attachment of marine organisms. Therefore, in this study, we tried to develop an antifouling coating agent with self-cleaning function for marine concrete. It was confirmed that the antifouling coating agent mixed with AKD, cellulose nanofibers and BADGE had sufficient antifouling performance at a well hydrophobicity of around 140° in contact angle and an inclination angle of 15°. In the abrasion resistance test of the surface, only a maximum loss of 0.015 g occurred. In the durability test, as a result of the chloride ion permeation test, almost no chloride ion permeation occurred in the variable where the coating agent was applied, and carbonation and freeze-thaw damage also rarely occurred, so it was analyzed that it was effective in securing durability of concrete.

• 한국해양학회지
• /
• v.9 no.2
• /
• pp.52-58
• /
• 1974

The water temperature distribution and the water movement closely related with it, in the east side of Korea, was condidered. Special emphasis was paid on the low temperature phenomenon near Ulgi. It was known from the temperature distribution in the east side of Korea that the Tsushima current continues to flow northward at the surface near Sokcho. Also the influence of the cold water extends from the North to the South with increasing depth. The formation of the cold core near Ulgi was explained as due mainly to the existence of the boundary layer near the surface, and partly to the effect of the wind. This inclination of the boundary layer has the value of about 3.0m/Km, and the lower cold current velocity computed using this value lies in the range of those observed by Nishida(1926, 1927). The upwelling velocity was computed approximately as 1.4 10$\^$-3/ cm/sec, and the maximum distance to which the boundarylayer can rise or fall from it's equilibrium position was considered as below 10m.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.389-403
• /
• 2010

Titanium and gold-alloy abutments have been used for a long-time in the clinical situations, but the use of zirconia abutments also increased. This study was designed to compare and evaluate the microgap differences according to types of abutment and dynamic loading. Titanium abutment, zirconia abutment and gold-alloy abutment (UCLA plastic) were connected into titanium implants of external hexagonal structure US II ${\phi}$ $3.75{\times}11.5$ mm (Osstem Co., Seoul, Korea) with the tightening torque of 30 Ncm. A sine type dynamic loading of 25-250 N and $30^{\circ}$ inclination from long axis was applied for $10^5$ times. Using the SEM both before and after the loadings, implant-abutment interfaces were analyzed on the labial, palatal, mesial and distal surface. The microgaps before and after the loading were compared, no statistically significant difference was observed caused by the dynamic loading on the labial, palatal, mesial or distal surface. Statistically significant difference was observed between UCLA and titanium group and between UCLA and zirconia group on both before and after the loading(p<0.05). No statistically significant difference was found between titanium and zirconia group. Loadings for $10^5$ times did not show significant effect to the microgaps between implants and abutments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.69-76
• /
• 2018

The present study analyzed the effect of film hole position of 45 degree ribbed cooling channel on film cooling performance of gas turbine blades. We also investigated the influence of the ribs under the fixed blowing ratio. Three-dimensional numerical model was constructed and extensive simulation was conducted using the commercial code (Fluent ver. 17.0) under steady-state condition. Base on the simulation results, We investigated the cooling effectiveness, flow velocity, streamline, and pressure coefficient. Moreover, We analyzed the effect of cooling hole position on ejection of the secondary flow caused by the rib structure. From the results, It was found that internal flow of the cooling channel forms a vortex pair in the counterclockwise from the top side, and clockwise from the bottom side. For the channels with ribs, the vortex flow generated by the ribs caused a higher pressure difference near the hole outlet, resulting in at least 12% higher cooling effectiveness than the channel without ribs. Additionally, when the hole is located on the left side of the ribbed channel (Rib-Left), it can be found that the secondary flow generated by the ribs hits against wall surface near the hole to form a flow in the direction of the hole inclination angle. Therefore, It is considered that the region where the cooling gas discharged to the blade surface stays in the main flow boundary layer is wider than the other cases. In this case, The largest pressure coefficient difference was observed near the outlet of the hole, and as a result, the discharge of the cooling gas was accelerated and the cooling efficiency was slightly increased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.320-325
• /
• 2008

This study was performed to effect of chain length distribution of amylopectin on gelatinization physical properties of cooked rice grains which were analyzed by alkali digestive value (ADV) in six rice cultivars. Those rice cultivars were Hwangumnuribyeo, Ilpumbyeo, Sangjubyeo, Taebongbyeo, Nampyungbyeo, and Dasanbyeo. The ADV values were evenly distributed from 7.0 (Hwangumnuribyeo) to 5.0 (Dasanbyeo). A similar chain length distribution of amylopectin was found in rice cultivars, indicating that DP12 had the highest distribution. Rice cultivars with high ADV value showed higher portion of short chain distribution upto DP15. The surface hardness of cooked rice increased consecutively to Dasanbyeo, Ilpumbyeo, and Hwangumnuribyeo. Among japonica type rice cultivars, the highest overall hardness was observed in Dasanbyeo followed by Hwangumnuribyeo and Ilpumbyeo. Correlation between hardness of rice graim and chain length distribution of amylopectin had the similar inclination to surface hardness of rice grains and overall hardness.