• 제목/요약/키워드: Surface free energy

검색결과 637건 처리시간 0.033초

금속 페라이트가 코팅된 제올라이트의 제조와 Cu(II)의 흡착 특성 (Preparation of Zeolite Coated with Metal-Ferrite and Adsorption Characteristics of Cu(II))

  • 백새얀;누엔반히엡;김영호
    • 공업화학
    • /
    • 제30권1호
    • /
    • pp.54-61
    • /
    • 2019
  • 본 연구에서는 Cu(II)의 흡착처리 후, 용액 내 함유된 폐흡착제의 효율적인 분리를 위하여 제올라이트(zeolite 4A)의 표면에 금속(Me = Co, Mn, Ni)이 치환된 페라이트 나노 입자를 성장시킨 자성흡착제를 합성하였다. 제올라이트 표면의 금속 페라이트는 용매열 합성법으로 제조되었으며, 자성흡착제의 특성은 XRD (X-ray diffractometer), SEM (scanning electron microscopy) 및 PPMS (physical property measurement system)로 분석하였다. Co-ferrite가 코팅된 제올라이트 복합체(CFZC)의 포화자화율이 5 emu/g으로 가장 높았으며, Cu(II)의 흡착 성능도 우수하였다. CFZC에 의한 Cu(II)의 흡착결과 값들은 298 K에서 Langmuir식에 잘 적용되었다. 그리고 Cu(II)의 흡착공정은 유사 2차 속도식에 부합하였다. 자유에너지 변화값(${\Delta}G^0=-4.63{\sim}-5.21kJ/mol$)은 Cu(II)의 흡착이 298~313 K 범위에서 자발적임을 나타내었다.

직교격자계 기반의 수치계산법을 이용한 슬래밍 충격압력의 연구 (A Study on Slamming Impact Pressure by a Numerical Method based on the Cartesian-grid System)

  • 김기용;이영길;하윤진;강의하;박정호;이선규;이창진
    • 대한조선학회논문집
    • /
    • 제56권4호
    • /
    • pp.308-315
    • /
    • 2019
  • In this study, numerical simulations of slamming impact pressure acting on the flat plate and wedge type models using the cartesian-grid system and Modified Marker-Density Method (MMD method) were performed and the results were examined. The flat plate and wedge type models were selected as target objects, the turbulence characteristics were considered by applying the Sub-Grid Scale (SGS) turbulence model. Through this study, how the pressure acting on the target objects according to the incident angle influences the slamming impact pressure was examined and the results were compared with the flow characteristics of other experimental results. Also, the degree of slamming impact pressure is evaluated with respect to the cartesian-grid system and MMD method, which is easy to use and has a high degree of calculation for free surface.

코코넛 오일로부터 유래된 카르복실레이트계 음이온 계면활성제의 합성 및 계면 특성에 관한 연구 (Synthesis of Carboxylate-Based Anionic surfactant from Coconut Oil Source and Characterization of Interfacial Properties)

  • 이예진;박기호;신희동;임종주
    • 공업화학
    • /
    • 제32권3호
    • /
    • pp.260-267
    • /
    • 2021
  • 본 연구에서는 코코넛 오일로부터 카르복실레이트계 음이온 계면활성제 SLEC-3을 합성하였으며, 합성된 계면활성제의 구조를 FT-IR, 1H-NMR 및 13C-NMR 분석을 통하여 확인하였다. 합성한 계면활성제 SLEC-3에 대하여 임계 마이셀 농도, 정적 및 동적 표면장력, 유화력, 거품 안정성 등의 계면 물성을 측정한 결과, 기존 세제 제품에서 널리 사용되는 음이온 계면활성제 SLES와 비교하여 계면 활성이 보다 우수하고 계면 에너지를 낮추는데 더 효과적이었다. 또한 SLCE-3에 대한 생분해성, 급성 경구 독성 및 급성 피부자극 시험을 실시한 결과, 저자극 및 저독성을 가지고 있기 때문에 세제 및 세정제 제품에 적용할 수 있을 것으로 판단되었다.

DC 전류 측정을 위한 탄소나노튜브와 합금으로 구성된 칩 타입 션트저항체의 전기적 특성 (Electrical Properties of Chip Typed Shunt Resistor Composed of Carbon Nanotube and Metal Alloy for the Use of DC Current Measurement)

  • 이선우
    • 한국전기전자재료학회논문지
    • /
    • 제34권2호
    • /
    • pp.126-129
    • /
    • 2021
  • We fabricated plate typed shunt resistors composed of carbon nanotube (CNT) and metal alloy for measuring DC current. CNT plates were prepared from dispersed CNT/Urethane solution by squeezing method. Cu/Ni alloys were prepared from composition-designed alloy wires for adjusting the temperature coefficient of resistance (TCR) by pressing them. As well, we fabricated a hybrid resistor by squeezing the CNT/Urethane solution on the metal alloy plate directly. In order to confirm the composition ratio of the Cu/Ni alloy, we used an energy-dispersed X-ray spectroscopy (EDX). Cross-section and surface morphology were analyzed by using a scanning electron microscopy (SEM). Finally, we measured the initial resistance of 2.35 Ω at 25℃ for the CNT paper resistor, 7.56 mΩ for the alloy resistor, and 7.38 mΩ for the hybrid resistor. The TCR was also measured to be -778.72 ppm/℃ at the temperature range between 25℃ to 125℃ for the CNT paper resistor, 824.06 ppm/℃ for the alloy resistor, and 17.61 ppm/℃ for the hybrid resistor. Some of the hybrid resistors showed a near-zero TCR of 1.38, -2.77, 2.66, and 5.49 ppm/℃, which might be the world best-value ever reported. Consequently, we could expect an error-free measurement of the DC current using this resistor.

Ni-Pd-CNT Nanoalloys에서 성장한 α-Ga2O3의 특성분석 (Characterization of Alpha-Ga2O3 Epilayers Grown on Ni-Pd and Carbon-Nanotube Based Nanoalloys via Halide Vapor Phase Epitaxy)

  • 차안나;이기업;김형구;성채원;배효정;노호균;;하준석
    • 마이크로전자및패키징학회지
    • /
    • 제28권4호
    • /
    • pp.25-29
    • /
    • 2021
  • 본 연구에서는 HVPE 방법을 사용하여 Ni-Pd and Carbon-Nanotube nanoalloys (Ni-Pd-CNT) 위에 α-Ga2O3을 성장시켜 Ni-Pd-CNT에 따른 효과를 확인하였다. 그 결과, 무전해 Ni 도금 시간 40초에서 성장한 α-Ga2O3 에피층의 두께는 11 ㎛로 확인되었다. 또한, α-Ga2O3 에피층의 표면 형태는 균열 발생 없이 기판에 대한 우수한 접착력을 보여주었다. 결과적으로, 성장과정에서 발생한 수평 성장에 의해 α-Ga2O3 대의 비대칭면인 ($10{\bar{1}}4$) FWMH 값을 크게 감소할 수 있었다.

Microencapsulated basil oil (Ocimum basilicum Linn.) enhances growth performance, intestinal morphology, and antioxidant capacity of broiler chickens in the tropics

  • Thuekeaw, Sureerat;Angkanaporn, Kris;Nuengjamnong, Chackrit
    • Animal Bioscience
    • /
    • 제35권5호
    • /
    • pp.752-762
    • /
    • 2022
  • Objective: Microencapsulation is a technique to improve stability, bioavailability, and controlled release of active ingredients at a target site. This experiment aimed to investigate the effects of microencapsulated basil oil (MBO) on growth performance, apparent ileal digestibility (AID), jejunal histomorphology, bacterial population as well as antioxidant capacity of broiler chickens in a tropical climate. Methods: A total of 288 one-day-old female broilers (Ross 308) were randomly allocated into 4 groups (6 replicates of 12 birds), based on a completely randomized design. Dietary treatments were as follows: i) basal diet (NC), ii) basal diet with avilamycin at 10 ppm (PC), iii) basal diet with free basil oil (FBO) at 500 ppm, and iv) basal diet with MBO at 500 ppm, respectively. Results: Dietary supplementation of MBO improved average daily gain, and feed conversion ratio of broilers throughout the 42-d trial period (p<0.05), whereas MBO did not affect average daily feed intake compared with NC group. The broilers fed MBO diet exhibited a greater AID of crude protein and gross energy compared with those in other groups (p<0.05). Lactobacillus spp. and Escherichia coli populations were not affected by feeding dietary treatments. Both FBO and MBO had positive effects on jejunal villus height (VH), villus height to crypt depth ratio (VH:CD) and villus surface area of broilers compared to NC and PC groups (p<0.05). Superoxide dismutase level in the duodenal mucosa of MBO group was significantly increased (p<0.01), whereas malondialdehyde level was significantly decreased (p<0.01). Conclusion: Microencapsulation could be considered as a promising driver of the basil oil efficiency, consequently MBO at 500 ppm could be potentially used as a feed additive for improvement of intestinal integrity and nutrient utilization, leading to better performance of broiler chickens.

쉘 모델을 이용한 공기 포일 스러스트 베어링의 열-유체-구조 연동 해석 (Thermo-Fluid-Structure Coupled Analysis of Air Foil Thrust Bearings using Shell Model)

  • 윤종완;문소연;박상신
    • Tribology and Lubricants
    • /
    • 제40권1호
    • /
    • pp.17-23
    • /
    • 2024
  • This study analyzes the thermal effects on the performance of an air foil thrust bearing (AFTB) using COMSOL Multiphysics to approximate actual bearing behavior under real conditions. An AFTB is a sliding-thrust bearing that uses air as a lubricant to support the axial load. The AFTB consists of top and bump foils and supports the rotating disk through the hydrodynamic pressure generated by the wedge effect from the inclined surface of the top foil and the elastic deformation of the bump foils, similar to a spring. The use of air as a lubricant has some advantages such as low friction loss and less heat generation, enabling air bearings to be widely used in high-speed rotating systems. However, even in AFTB, the effects of energy loss due to viscosity at high speeds, interface frictional heat, and thermal deformation of the foil caused by temperature increase cannot be ignored. Foil deformation derived from the thermal effect influences the minimum decay in film thickness and enhances the film pressure. For these reasons, performance analyses of isothermal AFTBs have shown few discrepancies with real bearing behavior. To account for this phenomenon, a thermal-fluid-structure analysis is conducted to describe the combined mechanics. Results show that the load capacity under the thermal effect is slightly higher than that obtained from isothermal analysis. In addition, the push and pull effects on the top foil and bump foil-free edges can be simulated. The differences between the isothermal and thermal behaviors are discussed.

Determination of Adsorption Isotherms of Hydrogen on Zirconium in Sulfuric Acid Solution Using the Phase-Shift Method and Correlation Constants

  • Chun, Jang-H.;Chun, Jin-Y.
    • 전기화학회지
    • /
    • 제12권1호
    • /
    • pp.26-33
    • /
    • 2009
  • The phase-shift method and correlation constants, i.e., the unique electrochemical impedance spectroscopy (EIS) techniques for studying the linear relationship between the behavior ($-{\varphi}$ vs. E) of the phase shift ($90^{\circ}{\geq}-{\varphi}{\geq}0^{\circ}$) for the optimum intermediate frequency and that ($\theta$ vs. E) of the fractional surface coverage ($0{\leq}{\theta}{\leq}1$), have been proposed and verified to determine the Langmuir, Frumkin, and Temkin adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at noble metal (alloy)/aqueous solution interfaces. At a Zr/0.2 M ${H_2}{SO_4}$ aqueous solution interface, the Frumkin and Temkin adsorption isotherms ($\theta$ vs. E), equilibrium constants (K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ for the Frumkin and K = $1.401{\times}10^{-16}\exp(8.1{\theta})mol^{-1}$ for the Temkin adsorption isotherm), interaction parameters (g = 3.5 for the Frumkin and g = 8.1 for the Temkin adsorption isotherm), rates of change of the standard free energy (r = $8.7\;kJ\;mol^{-1}$ for g = 3.5 and r = $20\;kJ\;mol^{-1}$ for g = 8.1) of H with $\theta$, and standard free energies ($96.13{\leq}{\Delta}G^0_{\theta}{\leq}104.8\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ and $0{\leq}{\theta}{\leq}1$ and ($94.44<{\Delta}G^0_{\theta}<106.5\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-16}\exp(-8.1{\theta})mol^{-1}$ and $0.2<{\theta}<0.8$) of H are determined using the phase-shift method and correlation constants. At 0.2 < $\theta$ < 0.8, the Temkin adsorption isotherm correlating with the Frumkin adsorption isotherm, and vice versa, is readily determined using the correlation constants. The phase-shift method and correlation constants are probably the most accurate, useful, and effective ways to determine the adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at highly corrosion-resistant metal/aqueous solution interfaces.

공유결합으로 다공성 막에 고정화된 PLD에 의한 포스퍼티딕산 생산 (Phosphatidic Acid Production by PLD Covalently Immobilized on Porous Membrane)

  • 박진원
    • 청정기술
    • /
    • 제21권4호
    • /
    • pp.224-228
    • /
    • 2015
  • 포스포라이페이즈디를 공유결합을 통해서 초미세다공성막에 고정화하였다. 고정화는 폴리에틸렌이민, 글루타알데하이드, 포스포라이페이즈디를 순차적으로 처리함으로써 수행되었다. X선 광전자 분광기를 이용하여 고정화가 확인되었다. 포스퍼티딜콜린이 분산된 버퍼용액의 pH값을 시간에 따라 모니터링하여 고정화된 경우와 그렇지 않은 경우에 대해 촉매활성을 산출하였다. 속도상수는 폴리스타이렌나노입자에 고정화된 포스포라이페이즈디에서는 0.64 s-1, 다공성 셀룰로스아세테이트막에 고정화된 포스포라이페이즈디에서는 0.52 s-1, 그리고 고정화되지 않은 포스포라이페이즈디에서는 0.75 s-1의 결과가 도출되었다. 재사용에 대한 연구가 10차례까지 수행되었으며, 초기 사용시의 활성대비로 95%가 유지되었다. 열과 저장성에 대한 안정성도 고찰되었으며, 다공성막에 고정화된 포스포라이페이즈디의 경우에 활성손실이 가장 적은 것으로 관찰되었다. 이 연구결과들로부터, 포스퍼티딕산의 생산용 포스포라이페이즈디의 고정화에 대한 지지체로 다공성 막을 사용할 수 있음을 알 수 있다.

Real-Time Monitoring of Mitochondrial ATP Synthesis and Hydrolysis by Surface Infrared Spectroscopy

  • Yamaguchi, Ryo-Taro;Hirano-Iwata, Ayumi;Aonuma, Yuki;Yoshimura, Yuya;Shinohara, Yasuo;Kimura, Yasuo;Niwano, Michio
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.108-109
    • /
    • 2013
  • Mitochondria play key roles in the production of cell's energy. Their dominant function is the synthesis of adenosine 5'-triphosphate (ATP) from adenosine diphosphate (ADP) and phosphate (Pi) through the oxidative phosphorylation. Evaluation of drug-induced mitochondrial toxicity has become increasingly important since mitochondrial dysfunction has recently been implicated in numerous diseases including cancer and diabetes mellitus. Mitochondrial functions have been monitored via oxygen consumption, mitochondrial membrane potential, and more importantly via ATP synthesis since ATP synthesis is the most essential function of mitochondria. Various analytical methods have been employed to investigate ATP synthesis in mitochondria, including high performance liquid chromatography (HPLC), bioluminescence technique, and pH measurement. However, most of these methods are based on destructive analysis or indirect monitoring through the enzymatic reaction. Infrared absorption spectroscopy (IRAS) is one of the useful techniques for real-time, label-free, and direct monitoring of biological reactions [1,2]. However, the strong water absorption requires very short path length in the order of several micrometers. Transmission measurements with thin path length are not suitable for mitochondrial assays because solution handlings necessary for evaluating mitochondrial toxicity, such as rapid mixing of drugs and oxygen supply, are difficult in such a narrow space. On the other hand, IRAS in the multiple internal reflection (MIR) geometry provides an ideal optical configuration to combine solution handling and aqueous-phase measurement. We have recently reportedon a real-time monitoring of drug-induced necrotic and apoptotic cell death using MIR-IRAS [3,4]. Clear discrimination between viable and damaged cells has been demonstrated, showing a promise as a label-free and real-time detection for cell-based assays. In the present study, we have applied our MIR-IRAS system to mitochondria-based assays by monitoring ATP synthesis in isolated mitochondria from rat livers. Mitochondrial ATP synthesis and hydrolysis were in situ monitored with MIR-IRAS, while dissolved oxygen level and solution pH were simultaneously monitored with O2 and pH electrodes, respectively. It is demonstrated that ATP synthesis and hydrolysis can be monitored by the IR spectral changes in phosphate groups in adenine nucleotides and MIR-IRAS is useful for evaluating time-dependent drug effects of mitochondrial toxicants.

  • PDF