• Design & Manufacturing
• /
• 제18권2호
• /
• pp.23-28
• /
• 2024

The automobile industry is a wide range of related industries, including parts manufacturing and vehicle assembly, press processing is an essential element in making automobiles. Press processing is a processing method for metal sheets that has relatively high dimensional and shape precision and is suitable for mass production. It refers to processing by attaching a special tool, a mold, to a press machine. Recently, the automobile industry is attempting to reduce the weight of automobiles in order to reduce carbon emissions due to global warming, and the use of high-strength steel sheets, which are lighter than general structural steel sheets, is a natural trend. Shear processing is required to use high-strength steel, and the shape of the shear surface created by shear processing has a significant impact on the quality of the automobile. Therefore, various methods are being attempted to improve the share surface during shear processing. Among them, shaving processing is a method of shearing the primary shearing area again, and it is difficult to obtain an accurate answer because complex deformation occurs in the microscopic shear area. Therefore, in this study, the effect of machining allowance on shaving processing was analyzed using the finite element method using high-strength steel plate (SPFH590), and the differences were compared and examined through actual experiments under the same conditions.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권4호
• /
• pp.203-212
• /
• 2005

온실기체의 인위적 배출은 지구온난화를 유발하여 해수면 상승, 극 기상 등 전 세계에서 피해가 증가하고 있다. 특히, 지구온난화 기여도가 가장 높은 온실기체 중 이산화탄소($CO_2$)는 주로 화석연료의 사용 공정에서 발생하는 폐기물이다. 대기 중의 이산화탄소의 농도 증가는 표층 해양을 산성화시켜 표층해양 생태계, 나아가서는 지구 전체 생태계에 악영향을 미치게 될 것으로 보인다. 이산화탄소 배출량을 줄이기 위해서 에너지 효율을 높이거나 대체 에너지를 이용하는 등의 완화 기술이 동원 되고 있다. 그러나 현재 세계 에너지 수요의 약 85%가 화석연료로 충당되고 있기 때문에, 화석연료 이외의 대체 에너지원으로 급격히 전환한다면 세계 경제에 엄청난 충격이 올 것이다. 다행히도 최근 이산화탄소를 포집하여 지질구조에 격리하는 기술이 개발단계를 지나 실용화단계로 성숙하였다. 이 방안으로 단기간에 온실기체의 대기로의 배출량을 대규모로 줄일 수 있다(이상 2005년 런던협약 과학그룹회의록에서 발췌). 우리나라의 경우는 이산화탄소를 격리시킬 수 있는 장소는 육상면적이 작고 인구 밀도가 높아서 육상보다는 해양저지질구조가 선호될 수밖에 없을 것으로 보인다. 해양 이용은 해양의 특성상 런던협약 등의 국제적인 규제를 받게 된다. 본고는 해저 지질 구조에 대한 이산화탄소의 격리 관련 기술 및 제도의 국제동향을 우리나라 입장에서 예비적으로 검토하였다.

• 한국지구과학회지
• /
• 제40권6호
• /
• pp.549-560
• /
• 2019

본 연구는 화력발전소 배출로 인한 지표면 오염물질 농도의 시·공간적 영향을 실측 자료를 바탕으로 정량적으로 분석하려는 목적으로 수행되었다. 배출과 농도 관계의 정량적 분석을 위해 우선 기상 조건과 주변 배출원의 영향을 고려하였다. 이를 위해 자료의 선택과 관측지점 선정 과정을 제안하였고, 선정된 지표면 시·공간 자료에 K-Z 필터와 경험직교함수(EOF) 분석 기법을 적용하였다. 사용된 자료는 2014-2017년 4년의 기간 동안 당진과 태안 화력발전소 굴뚝 자동측정기기의 농도값을 이용하여 산출한 한 시간 평균 배출량 자료와 지표면 대기오염농도 측정망 자료이다. 기상 자료로는 최근 배포 중인 ERA5 재분석자료와 기상청 종관기상관측소 한 시간 평균 자료가 사용되었다. 발전소만의 영향이 최대한 보이도록 기상 효과와 지리적인 요인을 고려하여 선택한 시간대의 선정된 관측소 자료만을 이용하여 분석한 결과, 지표면 대기오염물질의 EOF 첫 번째 모드는 SO₂, NO₂, PM₁₀ 모두에 대해 97% 이상의 변동성을 설명하였다. 또한 지표면 농도장의 EOF 첫 번째 모드의 시계열은 화력발전소 배출과 유의미한 상관성을 보였다. 결과적으로 당진화력발전소 SO₂, NO₂, TSP 시간 당 배출량이 각각 10%가 감소하면, 남서풍 계열의 바람에 의해 직접 영향을 받는 서울 수도권 지표면 평균 SO₂ 농도는 0.468 ppb (R=0.384), NO₂는 1.050 ppb (R=0.572), PM₁₀은 2.045 ㎍ m^-3 (R=0.343) 정도가 감소한다고 판단할 수 있다. 태안화력발전소의 경우, SO₂, NO₂, TSP 배출량을 각각 시간당 10% 씩 감축하면, SO₂는 0.284 ppb (R=0.648), NO₂는 0.842 ppb (R=0.683), PM₁₀은 1.230 ㎍ m^-3 (R=0.575) 정도가 감소될 수 있음을 확인하였다. 태안화력발전소는 당진화력발전소에 비해 수도권지역 농도에 미치는 영향은 작았으나, 상관관계는 더 높았다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E3호
• /
• pp.75-85
• /
• 2005

A mathematical sensitivity analysis of the flow-through dynamic flux chamber technique, which has been utilized usually for various trace gas flux measurement from soil and water surface, was performed in an effort to provide physical and mathematical understandings of parameters essential for the NO flux calculation. The mass balance equation including chemical reactions was analytically solved for the soil NO flux under the steady state condition. The equilibrium concentration inside the chamber, $C_{eq}$, was found to be determined mainly by the balance between the soil flux and dilution of the gas concentration inside the chamber by introducing the ambient air. Surface deposition NO occurs inside the chamber when the $C_{eq}$ is greater than the ambient NO concentration ($C_{0}$) introducing to the chamber; NO emission from the soil occurs when the $C_{eq}$ is less than the ambient NO concentration. A sensitivity analysis of the significance of the chemical reactions of NO with the reactive species (i.e. $HO_{2},/CH_{3}O_{2},/O_{3}$) on the NO flux from soils was performed. The result of the analysis suggests that the NO flux calculated in the absence of chemical reactions and wall loss could be in error ranges from 40 to $85\%$ to the total flux.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.48-54
• /
• 2016

The prediction of various emissions from coal combustion is an important subject of researchers and engineers because of environmental consideration. Therefore, the development of the models for predicting pollutants very fast has received much attention from international research community, especially in the field of safety assessment. In this work, response surface method was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of a drop tube furnace (DTF) to predict the spatial distribution of pollutant concentrations as well as final ones. The distribution of carbon dioxide in DTF was assumed to have Boltzman function, and the resulted function with parameters of a high $R^2$ value facilitates predicting an accurate distribution of $CO_2$. However, CO distribution had a difference near peak concentration when Gaussian function was introduced to simulate the CO distribution. It might be mainly due to the anti-symmetry of the CO concentration in DTF, and hence Extreme function was used to permit the asymmetry. The application of Extreme function enhanced the regression accuracy of parameters and the prediction was in a fairly good agreement with the new experiments. These results promise the wide use of statistical models for the quantitative safety assessment.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1091-1096
• /
• 2007

Water dispersible ZnS:Mn nanocrystals were synthesized by capping the surface of the nanocrystals with four kinds of aminoacids ligands: arginine, cystein, histidine, and methionine. The aminoacids capped ZnS:Mn nanocrystal powders were characterized by XRD, HR-TEM, EDXS, and FT-IR spectroscopy. The optical properties of the aminoacids capped ZnS:Mn colloidal nanocrystals were also measured by UV/Vis and solution photoluminescence (PL) spectroscopies in aqueous solvents. The solution PL spectra showed broad emission peaks around 575 nm (orange light emissions) with PL efficiencies in the range of 4.4 to 7.1%. The measured particle sizes for the aminoacid capped ZnS:Mn nanocrystals by HR-TEM images were in the range of 5.3 to 11.7 nm.

• Advances in nano research
• /
• 제1권1호
• /
• pp.59-70
• /
• 2013

ZnO nanostructures of rod-like, faceted bar, cup-end bars, and spindle shaped morphologies could be grown by a low power ultrasonic synthesis process. pH of the reaction mixture seems to plays an important role for defining the final morphology of ZnO nanostructures. While the solution pH as low as 7 produces long, uniform rod-like nanostructures of mixed phase (ZnO and $Zn(OH)_2$), higher pH of the reaction mixture produces ZnO nanostructures of different morphologies in pure hexagonal wurtzite phase. pH of the reaction as high as 10 produces bar shaped uniform nanostructures with lower specific surface area and lower surface and lattice defects, reducing the defect emissions of ZnO in the visible region of their photoluminescence spectra.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.549-552
• /
• 2012

Recently the world is trying to reduce carbon emissions for global warming. Reducing use of fossil fuels can decrease carbon emission. In this reason the construction field has tried to reduce the use of fossil fuels relating to heating and cooling of buildings. An energy loss through the window system is about 10 to 30 percent of energy consumption of the whole building. The use of window film insulation is increasing to control the heat loss at the windows. The window film insulation absorbs solar radiation and makes the surface temperature of windows high. In this study, window surface temperature is measured, and an impact on indoor air is identified after attaching window film insulation. Finally, we found that cooling load decreases through simulation.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1681-1690
• /
• 1998

The aim of this paper is to investigate combustion characteristics of lean premixed mixture stabilized by catalytic surface reaction. The catalytic combustor consisted of a catalyst bed and a thermal combustor. The catalyst bed was made of two stage, Pd catalyst in the first stage and Pt catalyst in the second stage. Auto ignition of lean mixture took place in the thermal combustor. Ignition temperature was about $810{\sim}820^{\circ}C$ at the fuel-air ratio of 1.5~3.0 % and the mixture velocity of 11~18m/sec. The position of flame front in the thermal combustor moved toward back as preheat temperature increased and fuel-air ratio decreased. The f1ame supported by surface reaction was stabilized without any flame stabilizers. NOx emissions from the catalytic combustor were below 2.0 ppm ($O_2$ 15 %) when gas temperature was limited below $1350^{\circ}C$. This result demonstrates that NOx emission from the catalytic combustor is much low comparing with conventional combustors.

• 한국표면공학회지
• /
• 제38권2호
• /
• pp.73-78
• /
• 2005

A real-time monitoring of ICP(inductively coupled plasma) assisted magnetron sputtering of MgO was carried out using a QMS(quadrupole mass spectrometer), an OES(optical emission spectrometer), and a digital oscilloscope with a high voltage probe and a current monitor. At the time of ICP ignition, the most distinct impurity was OH emission (308.9 nm) which was dissociated from water molecules. For reactive deposition oxygen was added to Ar and the OH emission intensity was reduced abruptly When the discharge voltage was regulated by a PID controller from 240V(metallic mode) to 120V(oxide mode), the emission intensity from Mg (285.2 nm) changed proportionally to the discharge voltage, but the intensity of Ar I(811.6 nm) was constant. At 100V of discharge voltage, Mg sputtering was almost stopped. Emissions from Ar I(420.1 nm) and Mg I were dropped down to 1/10, but Ar I(811.6 nm) didn't change. And the emission from atomic oxygen (O I, 777.3 nm) was increased to 10 times. These results are compatible with those from QMS study.