• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.988-991
• /
• 2001

Plastically deformed layer influences the mechanical property of the mechanical element such as creep hardening, microscopical crack and stress corrosion destruction. Therefore, the property so called the surface integrity has to be considered, and the machined surface including plastic deformation, distribution of stress has to be conducted quantitatively. This paper explains the orthogonal cutting, and made an orthogonal cutting model using the finite element method, then analyzed cutting power, plastic deformation of workpiece. It introduces the developed subsequent recrystallizations technique for measurement of the plastic strain of machined surface, and verified the technique.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.69-75
• /
• 2003

Plastically deformed layer influences the mechanical property of the mechanical element such as creep hardening, microscopical crack and stress corrosion destruction. Therefore, the property so called the surface integrity has to be considered, and the machined surface including plastic deformation, distribution of stress has to be conducted quantitatively. This paper explains the orthogonal cutting, and made an orthogonal cutting model using the finite element method, then analyzed cutting power, plastic deformation of workpiece. It introduces the developed subsequent recrystallizations technique for measurement of the plastic strain of machined surface, and verified the technique.

• Advances in nano research
• /
• 제15권2호
• /
• pp.165-174
• /
• 2023

The study investigated the effect of geometric structures of nano-patterned surfaces, such as peak sharpness, height, width, aspect ratio, and spacing, on mechano-bactericidal properties. Here, in silico models were developed to explain surface interactions with Escherichia coli. Numerical solutions were performed based on the finite element method and verified by the artificial neural network method. An E. coli cell adhered to the nano surface formed elastic and creep deformation models, and the cells' maximum deformation, maximum stress, and maximum strain were calculated. The results determined that the increase in peak sharpness, aspect ratio, and spacing values increased the maximum deformation, maximum stress, and maximum strain on E. coli cell. In addition, the results showed that FEM and ANN methods were in good agreement with each other. This study proved that the geometrical structures of nano-patterned surfaces have an important role in the mechano-bactericidal effect.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.565-574
• /
• 2005

The CANFLEX Mk-V bundle is designed to improve upon the critical heat flux (CHF) characteristics of the CANFLEX Mk-IV bundle. The main difference between these two bundles is an increase in bearing pad height of about 0.3 mm in the CANFLEX Mk-IV bundle. This change in bearing pad height leads to an increase in gap flow at the bottom of the bundle, primarily eliminating the localized narrow-gap effect that limits the CHF of the CANFLEX Mk-IV bundle. The objective of this paper is to examine the effects of bearing pad height and pressure tube creep on the sheath-temperature distribution, dryout power, and dryout location, as observed ken full-scale bundle tests, between CANFLEX Mk-IV and Mk-V bundles In uncrept and crept channels. A comparison of surface-temperature differences between the top and bottom elements of the bundles showed that increasing the bearing pad height has led to a more homogeneous enthalpy distribution in subchannels of the bundle. Initial dryout locations of the CANFLEX Mk-V bundle were mainly observed at the mid-spacer plane of either the $10^{th}$ (about $80\%$) or $11^{th}$ ($20\%$) bundle in the 12-bundle string, as compared to the mid-spacer and downstream-button planes for the CANFLEX Mk-IV bundle. Dryout power and boiling-length-average (BLA) CHF values exhibit consistent trends and little scatter with varying flow conditions for both types of CANFLEX bundles in uncrept and crept channels. An increase in pressure tube creep has led to a reduction in dryout power (about $20\%$ far the $3.3\%$ crept channel and $27\%$ for the $5.1\%$ crept channel as compared to dryout powers for the uncrept channel). Increasing the bearing pad height of the CANFLEX bundle has led to an increase in the dryout power. Overall, the dryout power of the CANFLEX Mk-V bundle is 7 to $10\%$ higher than that of the CANFLEX Mk-IV bundle at the inlet temperature range of interest (i.e., between 243 and $290^{\circ}C$).

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.22-31
• /
• 1994

해양 공간에 설치되어 유체의 흐름과 지형에 변화를 주며, 대상 수산 생물의 유집에 의한 생산 어장의 조성과 치어의 보호 육성을 도모하는 중효한 어장 시설인 인공어초의 기술 개발은 점차 다양화되어지고 있다. 부체부와 계류부로 구성되어 있는 부어초의 개발에 있어서는 부어초의 특성 및 안전상 계류시스템의 설계가 극히 중요한 부분이 된다. 이 논문에서는 부어초의 계류시스템에 많이 사용되어지는 나일론, 폴리에스터와 폴리에틸렌으로 이루어진 인조섬유로우프의 정적시험의 과정과 그 결과로서의 Creep거동 및 하중-인장 곡선을 얻었다. 특히 나일론 로우프의 경우 수중에서 20%내외의 강도 하락(Strength drop)이 관찰되며, Creep 시험 곡선은 대수시간 축(longerithmic time axis)상에서 직선을 유지하고, Flessner's formula와 평행한 결과를 얻었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.899-900
• /
• 2009

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.123-125
• /
• 2004

Flat specimens of polycrystal Ni-base superalloy with U-shape notch on both sides were laser cladded by injection of IN738LC powder onto surface. The quality of cladding was investigated by microstructural analysis and high temperature tension test, creep test at 950$^{\circ}C$. Effects of heat treahnent and the angle between the tension axis and the direction of weldment were also investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1434-1441
• /
• 2005

For anchored system applications, each ground anchor is tested after installation and prior to being put into service to loads that exceed the design. This load testing methodology, combined with specific acceptance criteria, is used to verify that the ground anchor can carry the design load without excessive deformations and that the assumed load transfer mechanisms have been properly developed behind the assumed critical failure surface. After acceptance, the ground anchor is stressed to a specified load and the load is locked-off. The two types of load tests conducted during the research program included performance test and creep test which were carried out in accordance with testing procedures by AASHTO(AASHTO 1990) and FHWA(Weatherby 1998) at Samsung-Dong 00 Site. Form the measurements, ultimate load and creep rate of anchors are proposed for straight shaft pressured grouted anchors in waste landfill. The load distribution on the grout was obtained from the measured strain data at each fraction of the ultimate load during the load tests.

• Nuclear Engineering and Technology
• /
• 제28권2호
• /
• pp.150-161
• /
• 1996

연구로용 우라늄-실리사이드 분산 핵연료에서의 응력 및 변형율 분포를 계산할 수 있는 변형모델을 개발하였다. 이 변형모델은 탄소성이론 및 지수법칙 크리프이론을 기초로 한 것이며, 또한 등방 핵연료팽윤 및 열팽창을 가정하였다. 개발된 모델을 HANARO 및 카나다의 NRU 핵연료에 적용하여 본 결과 핵연료의 변형을 성공적으로 계산하는 것으로 판단되었다. 계산결과에 따르면, 연구로용 우라늄-실리사이드 분산핵연료가 연소할 때 핵연료심에서 가장 중요한 변형기구는 팽윤이며, 피복관에서 가장 중요한 변형기구는 크리프이다. 또한, 피복관에서 원주방향 최대응력은 항상 5 MPa 이하로서 항복응력보다 훨씬 낮게 유지되었다. 여기서 고려한 두 핵연료설계에 대해서 전 연소도 범위에서 핵연료봉의 부피변화는 10% 이하로 예측되었다.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.178-185
• /
• 2014

Alloy 617 is considered as a candidate Ni-based superalloy for the intermediate heat exchanger (IHX) of a very high-temperature gas reactor (VHTR) because of its good creep strength and corrosion resistance at high temperatures. Helium is used as a coolant in a VHTR owing to its high thermal conductivity, inertness, and low neutron absorption. However, helium inevitably includes impurities that create an imbalance in the surface reactivity at the interface of the coolant and the exposed materials. As the Alloy 617 has been exposed to high temperatures at $950^{\circ}C$ in the impure helium environment of a VHTR, the degradation of material is accelerated and mechanical properties decreased. The high-temperature strength, creep, and corrosion properties of the structural material for an IHX are highly important to maintain the integrity in a harsh environment for a 60 year period. Therefore, an alloy superior to alloy 617 should be developed. In this study, the mechanical and high-temperature corrosion properties for Ni-Cr alloys fabricated in the laboratory were evaluated as a function of the grain boundary strengthening and alloying elements. The ductility increased and decreased by increasing the amount of Mo and Cr, respectively. Surface oxide was detached during the corrosion test, when Al was not added to alloy. However the alloy with Al showed improved oxide adhesive property without significant degradation and mechanical property. Aluminum seems to act as an anti-corrosive role in the Ni-based alloy.