• Journal of Surface Science and Engineering
• /
• v.29 no.5
• /
• pp.301-313
• /
• 1996

The texture of vapor deposits(PVD and CVD) changes from the orientation that places the lowest energy lattice plane parallel to the substrate under the condition of low atom or ion concentration adjacent to the deposit, to the orientation that places the higher energy crystal planes parallel to the substrate as the atom or ion concentration adjacent to the deposit increases. However, in the early stage of deposition, the deposit-substrate interface energy and the surface energy constitute the most important energies of the system. Therefore, if the lattice match is established between the substrate and the deposit without generating much strain energy, the epitaxial growth takes place to reduce the interfacial energy. When the epitaxial growth does not take place, the surface energy is dominant in the early stage of deposition and the lowest energy crystal plane tends to be placed parallel to the substrate up to a critial thickness. The thickness depends on the deposition condition. If the deposition condition does not favor placing the lowest energy crystal plane parallel to the substrate, the initial texture will change to that compatible with the deposition condition as the film thickness increases, and the texture turnover thickness will be short. The microstructure and surface topography of deposits are related to their texture.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.1
• /
• pp.67-74
• /
• 2008

A decrease in the ability to maintain static and dynamic balance after stroke could be related to the inability to select reliable sensory information in producing relative motor action needed to maintain postural stability. The purpose of this study was to compare the effects of two different types of surface conditions on the balancing ability of subjects with stroke. Eighteen hemiparetic subjects were assigned to an experimental and control group participating in a six－week rehabilitative therapeutic exercise program focusing on balance and mobility. Exercises were performed 3 to 5 times per week in a stable surface condition by the control group, and in an unstable surface condition by the experimental group. Pre－ and post test assessments involved the measurement of the static balance and dynamic balance, respectively by 7－item Berg Balance Scale－3P and by Pro－3 Balance System. Results showed that under the unstable surface condition, static balance in the experimental group showed more improvement than that of the control group.(Statistically, not very significant.) All the aspects of dynamic balance and mediolateral sway(balance) improved significantly than those of the control group. However, there were no significant differences between two groups. Overall, it can be concluded that under the unstable surface condition, the rehabilitative therapeutic exercise programs are effective in improving the dynamic balance of stroke subjects. The results suggest that the adaptation of the unstable surface in the rehabilitative therapeutic exercises could be effective for the patients with hemiplegia in balance. Further studies are needed to confirm the effectiveness of the unstable surface on improving balance and postural stability of hemiplegics.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1479-1492
• /
• 2015

This study evaluated the localized stress condition of the real corroded deck surface of an orthotropic steel bridge because severe corrosion damage on the deck surface and fatigue cracking were reported. Thus, a three-dimensional finite element (FE) analysis model was created based on measurements of the corroded orthotropic steel deck surface to examine the stress level dependence on the corrosion condition. Based on the FE analysis results, it could be confirmed that a high stress concentration and irregular stress distribution can develop on the deck surface. The stress level was also increased by approximately 1.3-1.5 times as a result of the irregular corroded surface. It was concluded that this stress concentration could increase the possibility of fatigue cracking in the deck surface because of the surface roughness of the orthotropic steel bridge deck.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.760-763
• /
• 2005

Optimum design of the tooth surface for the reduction of transmission error is very difficult to determine analytically due to nonlinearity of transmission error under the several load condition. The design of tooth surface that can give a low noise under the various load condition is very important. Therefore, this study proposes the method to determine the optimal lead curve and robust design of the tooth surface by using the response surface method. To do so, the design variables are selected by a screening experiment. Then the fitted regression model Is built with the check of the usefulness of the model. The model with constraints is solved to obtain the optimum values for the lead curve and the robust design fur the tooth surface.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.671-691
• /
• 1993

To estimate the possibility in the application of TiN ion-plating to the orthodontic appliance, this study investigated frictional force and frictional coefficient between non-ionplated and TiN ion-plated to the orthodontic appliance. The obtained results were as follows : 1. For each group, the frictional force between metal bracket and arch wire in the wet condition was exhibited lower than that in the dry condition. 2. In the dry condition, the frictional force was lowest with fourth group, and it increased in the order of the 3rd, 1st, and 2nd group. Same situation happened in the wet condition. 3. Experimental results using ceramic & plastic bracket showed that group B was lower than group A, and group D was similar to group C. 4. The surface texture after experiment showed that the scratch due to a friction with bracket was observed in an arch wire of dry contition. Also the surface of bracket was rougher than before. 5. We observed that a specimen surface processed with the TiN ion plating was smoother than that of without the TiN ion plating. 6. The surface texture of a metal bracket and an arch wire in the wet condition was observed smoother than that in the dry condition. 7. In the dry condition, the friction coefficient of each specimen was very similar to each other, but in the wet condition, the friction coefficient of specimen processed with the TiN ion plating showed lower values.

• Journal of Convergence for Information Technology
• /
• v.11 no.5
• /
• pp.267-275
• /
• 2021

Skin condition is an important concern in beauty aspect. This study considered a rough skin condition analysis method that beauty industry workers can do through visual observation or skin condition images taken with smartphones. First, studies that combine subjective and objective evaluations were selected among degree papers and academic papers searched by keywords related to 'skin condition' in the Research Information Sharing Service(RISS). Among them, papers that derive correlations with visually verifiable factors were selected. Next, the relationship between factors that match subjective skin condition and objective skin measurement results and factors that can be visually identified on the skin surface was investigated. According to the study, the most suitable factor for matching subjective and objective evaluations was 'oil volume', which is significantly related to 'pore', 'skin texture' and 'erythema', which can be visually checked on the skin surface. It is believed that a rough skin condition analysis will be possible using this.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.75-75
• /
• 1998

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.23-32
• /
• 1992

Surface treatment and chemiluminescence characteristics of the polymer film. It was studied that the Intensities and rates of treatments are in proportional to condition of the treatment, considering the results of study on treatments to polymer film with discharge and ultraviolet irradiation through the methods such as surface resistance, contact angle, dyeing method, solace ten-sion and so on. It was also studied that the said has a nice correlation with the concerned result studied by chemiluminescence. Since the chemiluminescence will enable the Investigators to grasp a eertain condition caused by quitely slight deterioration with high sensitivity, it can be also used as a way for getting an information regarding the decision for degradation-condition and life-estimating of insulation material basically related to some security matters as well as surface condition of treatments through the above method.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.286-289
• /
• 1987

The measurements of prebreakdown currents and breakdown voltages have been made for smooth rough, protrusion plane parallel stainless steel electrodes in vacuum ($10^{-5}$ torr), as a function of electrode separation, in the range $0.4{\sim}2.4mm$ using DC source($0{\sim}200KV$). Thee prebreakdwon currents of a each condition are found to be consistent with the Fouler-Nondheim field emission theory. The effect of the electrode surface condition on the local field enhancement factors, prebreakdown currents, and on the breakdown voltages are shown. The breakdown mechanism of a small vacuum gap was ascertained as the field emission corresponding the F-N theory. Therefore, these results suggest that the field emission currents following the electrode surface condition play a major role for initiation of DC breakdown.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.55-62
• /
• 2012

In this paper, the rigid lid boundary condition is applied to simulate the influence of floating structures such as ships or pontoons, and the pressure term in both the momentum equations and continuity equation are modified. The pressure of a floating structure under the free surface is dependent on the draft of the structure, generally called a ship. If the free surface is covered by a floating structure, the free surface cannot move freely. The water level should be fixed, using a rigid lid boundary condition. This boundary condition is implemented by reducing the storage area of the grid cell with a factor between zero and one. The numerical model developed by Hong (2009) is verified through a comparison with experimental results, and the influence of the reduction factor is investigated using the verified numerical model.