• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.233-245
• /
• 1992

The purpose of this study was to evaluate the demensioal stability and wettability of several rubber impression materials. Impressions were made from a metal master die machined to stimulate five full veneer crown preparations symmetrically placed in an arch form. Cast from impressions were measured about ; 1) intrapreparation distance 2) lower base diameter 3) length. For comparing materials were formed against a smooth surface. The advancing contact angle of a saturated aqueous solution of $CaSO_4$ on the impression materials was measured after 1 minute. Mean contact angle were calculated and results were analyzed. Results were as follows : 1. As the intrapreparation distance, hydrophilic addition-cured silicone had the smallest change and condensation-cured silicone had the largest one. 2. As the lower base diameter, traditional addition-cured silicone had the smallest change and polyether had the largest one. 3. As the height, traditional addition-cured silicone had the smallest change and polyether had the largest one. 4. As the contact angle, polyether had the smallest change and condensation-cured silicone had the largest one.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1583-1594
• /
• 1992

본 연구에서는 동층류 축대칭 확산화염에서 이전까지의 화염해석 방법들을 면 밀히 고찰하여 층류 확산화염 방식의 연소문제를 해결하는데 있어서 접근이 용이하고 타당성을 가지는 화염해석 방법을 찾아내는데 있으며 매연 입자에 관한 생성및 산화모 델을 총체적으로 연결하여 실험결과와의 비교를 통해 적절한 모델인수를 결정하며 복 사효과와 열영동효과를 고려하여 화염해석과 화염내의 매연입자의 분포를 예측하는데 있다.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.98-104
• /
• 2018

Deflected 4-way panels of ceiling air conditioners produced by injection molding process have caused dew condensation at the edge of products. In order to prevent this drawback with reducing weight and deformation, this study proposed renovated process adopting microcellular foaming. According to results from 2-sample t-test and analysis of variance(ANOVA), the critical factors affecting weight were melt temperature and injection speed. In addition, the vital effects on deformation were structure at the edge, mold temperature and cooling time. Optimal conditions of these parameters were derived by regressive analysis with CAE and response surface method(RSM), and then applied to an actual design and process stage to analyze performance. As a results, it clearly showed that new process improved process capability as well as reduced both weight and deformation by 18.8% and 71.9% respectively compared to the conventional method.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1853-1859
• /
• 2019

The two-thermocouple method was investigated experimentally to evaluate its accuracy for the measurement of local wall temperature and heat flux on a heat transfer tube with an electric heater rod installed in an annulus channel. This work revealed that a thermocouple flush-mounted in a surface groove serves as a good reference method for the accurate measurement of the wall temperature, whereas two thermocouples installed at different depths in the tube wall yield large bias errors in the calculation of local heat flux and wall temperature. These errors result from conductive and convective changes due to the fin effect of the thermocouple sheath. To eliminate the bias errors, we proposed a calibration method based on both the local heat flux and Reynolds number of the cooling water. The calibration method was validated with the measurement of local heat flux and wall temperature against experimental data obtained for single-phase convection and two-phase condensation flows inside the tube. In the manuscript, Section 1 introduces the importance of local heat flux and wall temperature measurement, Section 2 explains the experimental setup, and Section 3 provides the measured data, causes of measurement errors, and the developed calibration method.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1189-1194
• /
• 2004

The adsorption isotherms of N2 onto the metallic silver treated activated carbon fiber samples after acid treatment are Type I with a small amount of capillary condensation hysteresis. Increasing amount of acid treatment leads to a decrease in SBETs and external surface area. But, micropore volume and average pore diameter are presented in constant regular values with increasing amount of sulfuric acid treatment. SEM observes the surface morphology and crystal grown state of metal on the fiber surface. The results of EDX of Ag-activated carbon fiber pre-treated with acid show the spectra corresponding to almost all samples rich in silver with increasing the amount of acid treated. The FT-IR spectra of Ag-activated carbon fiber show that the acid pre-treatment is consequently associated with the homogeneous dispersion of metal with the increased surface acidity of the activated carbon fiber. The type and quality of oxygen groups are determined with Boehm titration method. From the those results, a positive influence of the acidic groups on the carbon fiber surface by acid treatment is also demonstrated by an increase in the contents of metallic silver with increasing of acidic groups.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.393-398
• /
• 2008

Trace analysis of Cd and Pb at surface modified thick film graphite electrode with Bi nanopowder has been carried out using square-wave anodic stripping voltammetry (SWASV) technique. Bi nanopowder synthesized by gas condensation (GC) method showed the size of $50{\sim}100$ nm with BET surface area, $A_{BET}=6.8m^{2}g^{-l}$. For a strong adhesion of the Bi nanopowder onto the screen printed carbon paste electrode, nafion solution was added into Bi-containing suspension. From the SWASV, it was found that the Bi nanopowder electrode exhibited a well-defined responses relating to the oxidations of Cd and Pb. The current peak intensity increased with increasing concentration of Cd and Pb. From the linear relationship between Cd/Pb concentrations and peak current, the sensitivity of the Bi nanopowder electrode was quantitatively estimated. The detection limit of the electrode was estimated to be $0.15{\mu}g/l$ and $0.07{\mu}g/l$ for Cd and Pb, respectively, on the basis of the signal-to-noise characteristics (S/N=3) of the response for the $1.0{\mu}g/l$ solution under a 10 min accumulation.

• Safety and Health at Work
• /
• 제7권4호
• /
• pp.381-388
• /
• 2016

Background: Relationships among portable scanning mobility particle sizer (P-SMPS), condensation particle counter (CPC), and surface area monitor (SAM), which are different metric measurement devices, were investigated, and two widely used research grade (RG)-SMPSs were compared to harmonize the measurement protocols. Methods: Pearson correlation analysis was performed to compare the relation between P-SMPS, CPC, and SAM and two common RG-SMPS. Results: For laboratory and engineered nanoparticle (ENP) workplaces, correlation among devices showed good relationships. Correlation among devices was fair in unintended nanoparticle (UNP)-emitting workplaces. This is partly explained by the fact that shape of particles was not spherical, although calibration of sampling instruments was performed using spherical particles and the concentration was very high at the UNP workplaces to allow them to aggregate more easily. Chain-like particles were found by scanning electron microscope in UNP workplaces. The CPC or SAM could be used as an alternative instrument instead of SMPS at the ENP-handling workplaces. At the UNP workplaces, where concentration is high, real-time instruments should be used with caution. There are significant differences between the two SMPSs tested. TSI SMPS showed about 20% higher concentration than the Grimm SMPS in all workplaces. Conclusions: For nanoparticle measurement, CPC and SAM might be useful to find source of emission at laboratory and ENP workplaces instead of P-SMPS in the first stage. An SMPS is required to measure with high accuracy. Caution is necessary when comparing data from different nanoparticle measurement devices and RG-SMPSs.

• 보존과학연구
• /
• 통권31호
• /
• pp.103-120
• /
• 2010

Most of the important stone cultural heritage (National treasures and Treasures) in Korea are mainly located outdoor and considerably affected by the changes of the temperature, humidity and rainfalls. 541 of the stone cultural heritage are preserved as National treasure and Treasure. The pagodas occupy 187 remains and next 127 Buddha statues, 68 monuments, 60 stupas, and the others 74 stone cultural heritages. The shelter has been installed for one pagoda, 60 Buddha statues, 36 monuments and two stupas. The shelters are categorized in three shapes as traditional shape, modern shape, and others (tradition+modern). Approximately 100 of shelters that have constructed in traditional ways, and about nine of shelters have modern ways, and the only one has the combination shape of tradition and modern, which has been constructed since mid 1900s and repaired from the 1980s~2000s. Many researchers are studying for improvement of manners such as repairing, remodeling or removing of the shelter because problems have occured on shelters. Architectural form of traditional style of Korean timber building is respected, but it has problems on importing natural sunlight to the inside as well as ventilation and spacial problems. However, it needs to supplement policies to improve the positive roles of shelters such as prevention of artificial damage, blocking acid rain, and so on. For instance, the rock-carved Buddha Triad in Seosan, it had problems with viewing, contamination, and dew condensation on the surface. These problems decreased after dismantling the shelter, the space was made for improvement of viewing and dew condensation, and moisture problems were in better conditions. The velocity wind is an important factor in drying conditions on the surface of the rock, therefore the condition has improved after dismantling the shelter.

• 한국건설관리학회논문집
• /
• 제22권3호
• /
• pp.31-39
• /
• 2021

모듈러 공법은 내장재와 기계·전기 설비 등이 시공된 구조체를 제작 공장에서 건설 현장으로 운반하여 설치 및 시공하는 공법이다. 모듈러 공법은 특히 주택과 같은 소규모의 비교적 구조가 간단한 건축물을 대상으로 활발하게 적용되고 있는 추세이다. 국내건설 산업에 모듈러 주택의 도입된 기간이 길지 않은 만큼 아직 모듈러 주택의 환경적 특성에 대한 연구가 부족한 실정이다. 따라서 본 연구의 목적은 모듈러 주택의 단열성능을 적외선 이미지 분석과, Air-Surface Thermal Ratio 방법, 실내외 온도차비를 활용하여 실증적으로 분석하는 것이다. 이를 위해 실제 서울시에 위치한 준공 후 2년이 경과된 모듈러 주택과 RC 주택을 비교하여 단열성능 분석하였다.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1355-1369
• /
• 2021

본 연구는 도로 노면결빙 판정 알고리즘에 대해 알고리즘을 개선하고 실제 현장 측정 자료와 알고리즘 예측값을 비교하였을 때 알고리즘에 대한 적중률을 분석하였다. 분석을 위하여 포천시 신북면 금동리의 도로 및 기상을 측정하였다. 알고리즘은 기존 도로 결빙 알고리즘을 선정하여 실제 결빙 조건 및 측정 수치에 맞춰 4차 알고리즘까지 개선하였다. 최종적으로 응결에 의한 결빙, 강수에 의한 결빙, 적설에 의한 결빙, 결빙상태의 지속, 풍속에 의한 결빙 5개의 알고리즘을 제작하였다. 포천 현장에서 알고리즘을 활용하여 예측할 경우 경우 결빙 적중률이 93.22%까지 개선되었다. 결빙 알고리즘에 대한 조합 비율에 대해 도출하였을 때 응결에 의한 결빙과 결빙상태의 지속에 대한 알고리즘이 96%를 차지하였다.