• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.256-256
• /
• 2009

This paper presents a proper condition to achieve above 17 % conversion efficiency using PC1D simulator. Crystalline silicon wafer with thickness of $240{\mu}m$ was used as a starting material. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer. Among the investigated variables, we learn that 2nd doping concentration as a key factor to achieve conversion efficiency higher than 17 %.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.2
• /
• pp.101-109
• /
• 1995

Electroetching rates of $FeCl_3$ solution were increased according to increasing solution temperature. Activation energy of electroetching at Be'36 and 5A/$dm^2$ condition was 28.3Kcal and also, at Be'46 and 5A/dm$^2$ condition was 33.2Kcal. At Be'36 concentration of $FeCl_3$ solution, electroetching rate were more higher than at Be'46 concentration. Surfaces of etched grooves obtained at 8A/$dm^2$ or higher current density in 46 Be' concentration of $FeCl_3$ solution were observed to be flat and smooth owing to suppressing chemical etching reaction. Distinctly etched boundaries became to be appeared at 2A/$dm^2$ in Be'41 electroetching condition by differential effects. In case of applying 8A/$dm^2$ current density to Be'46 of $FeCl_3$ solution, etching depth were 4 times and side etching were 6 times more than chemical etching case respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.28-31
• /
• 2002

This paper compared the surface roughness with variables before development of centerless grinding using far ferrule machining. In this paper, theoretical surface roughness is obtained from variables such as mesh number, rate of concentration of grinding wheel, wheel rotation of work-piece etc., and optimum condition of machining is selected. For satisfaction the technical side and economical side, centerless grinding using fur ferrule machining should be designed more than #600, 18.8% rate of concentration of grinding wheel, 1440rpm wheel rotation outwork-piece.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.52-59
• /
• 2005

The purpose of this study is to establish the scientific data of cotton fabric pretreated with skim milk powder and to improve the dyeability. The surface monophology, add on, whiteness, stiffness, air permeability, moisture regain and absorption of cotton fabrics were evaluated by varying concentration of SMP to get the optimal conditions in pretreatment. FT-IR of cotton fabrics pretreated with SMP were measured. Amino acid compositions, viscosity of SMP were evaluated. The K/S values by varying concentration of cinnamon cassia and subtract of dyed SMP-C were measured. I attempted to evalute the color fastness of untreated and AI. The results are as follow; The optimal concentration of SMP was 9%(w/v) to be pretreated with cotton fabrics. From FT-IR spectrum, formation of -NH$_2$ and -COOH was verified by SMP-C. Denaturalization of protein and condensation of carbohydrate, fat, etc. were found in a measurement of amino acid and viscocity. The K/S value of cotton fabrics pretreated with SMP was higher than that of untreated. Most of the color fastnesses were great.

• Journal of Mechanical Science and Technology
• /
• v.14 no.11
• /
• pp.1276-1285
• /
• 2000

The solubility, the surface concentration and the dissolution behavior of carbon dioxide in deep sea were numerically investigated. Base on the calculations the relations between the surface concentration of liquid carbon dioxide droplet with the hydrate film and the solubility and those between the ambient carbon dioxide concentration in the plume and the dissolution rate were obtained. The result show that a carbon dioxide droplet is released both at 1000 m in depth with the initial droplet diameter of 0.011 m or less and at 1500 m in depth with a diameter of 0.015 m or less, and the droplet is completely dissolved below 500 m in depth. The hydrate film acts as a resistant layer for the dissolution of liquid carbon dioxide, and the effect of the hydrate film on the dissolution of liquid carbon dioxide depended upon the depth.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.475-478
• /
• 2005

Deicing salt has been generally used for traffic safety in winter, and the amount is increasing every year. However, deicing salt may induce the decrease of bond strength, surface scaling, and environmental pollution, etc. the purpose of this paper is to suggest the fundamental data on safety and durability for concrete structures through the estimation of chloride concentration profile and chloride diffusion coefficient. According to the test results, the critical chloride concentration($0.9\~1.2kg/m^3$)was measured at depth $23\~30mm$, and the limit chloride concentration($0.3kg/m^3$)was reached to depth 40mm. Also the surface chloride amount indicates 3.45kg per concrete unit weight, and the results showed the possibility of corrosion by deicing salt penetration.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.424-431
• /
• 2003

The evaporation cooling phenomenon of a droplet containing a surfactant on a heated surface has been studied experimentally. The two kinds of heater modules made of brass and Teflon$^{TM}$ were tested to investigate the cooling characteristics of droplet. Solutions of water containing Sodium Lauryl Sulfate(0 ppm, 100 ppm, 1000 ppm) were tested in the experiments. The results showed that the contact angle decrease as the concentration of surfactant increases. The tendency did not very with different heated solid materials. As initial temperature of the heated surface becomes high, time averaged heat flux increases and evaporation time decreases with the denser concentration of surfactant. Therefore, water with denser concentration of surfactant could be effective to cool flammable materials. However, the effect of surfactant becomes low as the material temperature is higher than the boiling temperature of water.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.60-67
• /
• 1995

This study was made to investigate the effect of silk fabrics treated with mimosa and tannic acid-weighting effect, surface color according to temprature, treatment time, concentration, pH. The results were as follows ; 1. The wavelength of maximum absorption of mimosa and tannic acid solution appeared at 278.5nm and 275.0nm, respectively. By the irradiation, spectra at wavelength of maximum absorption of mimosa solution disappeared, but those of tannic acid solution decreased after 48hr irradiation. 2. The tannin weighting increased with the increase of concentration, treatment temperature at 8$0^{\circ}C$, acidic condition. In case of tannic acid, it was higher than mimosa. 3. Surface color of silk fabric with mimosa changed from 2.8YR to 5.8YR acc-ording to the increase o( tannin concentration but in case of tannic acid itchanged from 4.2Y to 3.9Y. It was more changed acidic or alkaline conditionthan origine solution.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.80-87
• /
• 2002

Tungsten carbide microshaft is used as micro-punch, electrode of MEDM (micro-electro-discharge machining), and micro-tool because it has high hardness and high rigidity. In this study, the tungsten carbide microshaft was fabricated using electrochemical machining. Concentration of material removal at the sharp edge and metal corrosion layer affect the shape of the microshaft. Control of microshaft shape was possib1e through conditioning the machining voltage and electrolyte concentration. By applying periodic voltage, material removal rate increased and surface roughness improved. The fabricated microshaft in $H_2 SO_4$ electrolyte maintained sharper end edge and better surface finish than those fabricated by other electrolytes.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.643-648
• /
• 1995

Cyclic voltammetric method is used to survey microscopic environments which take place at the surfactant-modified carbon electrode when the hydrophobic and hydrophilic environments of $Ru(ph){_3}^{2+}$(tris 1,10-phenanthroline ruthenium(II) chloride) is created by the addition of anionic surfactant, sodium dodecyl sulfate(SDS). Critical micelle concentration(CMC) of SDS in $Ru(ph){_3}^{2+}$ measured by cyclic voltammetry(CV) is in aggrement with that by surface tensiometry. Influence of the concentration of supporting electrolyte at surfactant-modified carbon electrode is investigated.