• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.193-199
• /
• 2005

The objective of this study was to investigate the characteristics of adhesion and detachment of algae on various materials of drainage canal in the sedimentation basin. The influence of surface washability, surface roughness, phosphorous concentration was studied using stainless steel, cement block and ceramic panel. The algae attached content of cement block was higher than that of the ceramic coating panel. The attachment varied significantly with respect to exposure time and different materials. the attachment was higher on rough surface (cement block) when compared to smooth surfaces. The content of attached algae increased with increasing phosphorous concentration in water. The detachment efficient of algae was higher on ceramic panel.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1140-1149
• /
• 2004

The absorption characteristics of water vapor into a LiBr-H$_2$O solution flowing down on finned inclined surfaces are numerically investigated in order to study the absorbing performances of different surface shapes of finned tubes as an absorber element. A three-dimensional numerical model is developed. The momentum, energy, and diffusion equations are solved simultaneously using a finite difference method. In order to obtain the temperature and concentration distributions, the Runge-Kutta and the Successive over relaxation methods are used. The flat, circular, elliptic, and parabolic shapes of the tube surfaces are considered in order to find the optimal surface shapes for absorption. In addition, the effects of the fin intervals and Reynolds numbers are studied. The results show that the absorption mainly happens near the fin tip due to the temperature and concentration gradient, and the absorbing performance of the parabolic surface is better than those of the other surfaces.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.809-816
• /
• 2008

The influences of various parameters such as inclusions, surface roughness, exposed areas and chloride ion concentrations on the initiation of pitting of Fe-17Cr alloy were investigated, using micro-droplet cell technique. Micro-droplet cell allows one to align the micro-electrode to the desired spot of the working electrode and measure directly local currents with the potentiodynamic polarization. Micro electrochemical tests were carried out at the inclusions after EDX analysis of inclusion. EDX analysis identified inclusions as Cr-oxides. It was found that some active inclusions among Cr-oxide inclusions acted as initiation sites for pitting corrosion. In addition, the rougher surface and the denser chloride ion concentration offered easier pit initiation sites, causing the more susceptible to pitting corrosion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.327-328
• /
• 2021

In the manufacturing process of ready-mixed concrete, quantity management directly affects the workability and strength of concrete. Therefore, water quantity is the most important management factor for water quality control of ready-mixed concrete. It can be said that the number of unit water in the mix design, the water quantity due to the surface water contained in the aggregate used, and the water quantity taking into account the concentration of sludge contained in the recycling water when using the recycling water are factors that affect the quantity management of ready-mixed concrete. In this study, as a stable quality control method of ready-mixed concrete, a quantity management method by aggregate surface water and a sludge concentration management method according to the use of recycling water were proposed. Thus, we tried to suggest an efficient quantity management method for stabilizing the quality of ready-mixed concrete.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.348-354
• /
• 1994

The changes of surface activities in the aquaous solutions of mixed surfactants composed of linear sodium dodecylbenznesulfoate (LAS), polyoxyethylene nonyl phenylether (PE, EO=10) and polyethylene glycol monolauryl ether (LE, EO=25) have been studied. Addition of nonionic surfactants to LAS reduces the surface tension, especially at the lower concentration than cmc. The interfacial tension of olive oil/LAS was lower than the other surfactant solutions. The removal of triolein from cotton fabrics by nonionic surfactants and mixtures is higher than by LAS. The addition of NaCI to surfactant solutions even though reduces surface tension smaller but enthances oil removal more than that of $CaCl_2$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.179-192
• /
• 1993

Three-dimensional cohesive sediment transport model, COSETM-3, is develpoed using a finite difference method. The model results are compared with the physical experimental results for the relative concentration with time at the mid-depth of the recirculating flume and are found to be in good agreement. This model is applied to Suyoung Bay in Pusan of Korea to verify the field applicability of the model and to investigate on the SS (suspended solids) diffusion phenomena at the bay. Behaviors of discharging SS from Suyoung River at normal river flow and flood river flow are predicted. The numerical results appear to be reasonable and qualitative agreement with field data. The influence of settling velocity on the concentration distribution of SS is also investigated. In case of not considering settling velocity, SS concentration at surface layer is higher than that at lower layer, but in case of considering settling velocity, SS concentration at lower layer is higher than that at surface layer. The fluctuation of SS concentration at surface layer is large due to the strong mixing, but the fluctuation of the concentration at lower layer is small due to the weak mixing. SS diffusion patterns at flood river flow are similar to those at normal river flow, while the concentration at that flow is so much higher than that at this flow. SS concentration increases with time until the peak discharge occurs, but the concentration decreases with time with decreasing river flow after the peak discharge.

• Korean Journal of Environmental Biology
• /
• v.18 no.1
• /
• pp.21-31
• /
• 2000

We investigated seasonal variation of microalgal assemblages, sea water temperature, salinity and suspended solid and the parameters measured daily from January 1998 to October 1999 at a nearshore shallow-water in Marian Cove, Maxwell Bay, King George Island, the Antarctic. Annual mean surface water temperature was -0.3$0^{\circ}C$ and the highest water temperature was 4.53$^{\circ}C$ (22 January 1999) and the lowest water temperature was -2.07$^{\circ}C$ (23 August 1998). Annual mean salinity was 33.38 psu, ranging from 42.80 psu (6 January 1999) to 19.50 psu (6 June 1999). Annual mean suspended solid (SS) during two years was 34.14 mgㆍ1$^{-1}$, ranging from 60.62 mgㆍ1$^{-1}$(7 March 1998) to 12.90 mgㆍ1$^{-1}$ (26 December 1998). Chlorophyll $\alpha$ (Chl $\alpha$) concentrations were measured in order to know seasonal variations of microalgae in the surface seawater. Annual mean of total Chl a concentration was 0.55$\mu\textrm{g}$ㆍ1$^{-1}$, the highest Chl $\alpha$ concentration (12.16$\mu\textrm{g}$ㆍ1$^{-1}$) appeared in 4 October 1998, the lowest Chl $\alpha$ concentration appeared 0.19$\mu\textrm{g}$ㆍ1$^{-1}$, Monthly mean total Chl $\alpha$ concentration was high in October 1998 (1.32$\mu\textrm{g}$ㆍ1$^{-1}$) and low in July on 1998 (0.28$\mu\textrm{g}$ㆍ1$^{-1}$). Annual mean nano-sized Chl $\alpha$ concentration was 0.40$\mu\textrm{g}$ㆍ1$^{-1}$, monthly mean nano -sized Chl $\alpha$ concentration was high in November 1998 (0.90$\mu\textrm{g}$ㆍ1$^{-1}$), and low in July 1999 (0.22$\mu\textrm{g}$ㆍ1$^{-1}$). Annual mean micro-sized Chl $\alpha$ concentration was 0.15$\mu\textrm{g}$ㆍ1$^{-1}$ monthly mean micro-sized Chl $\alpha$ concentration was high in October 1998 (0.81$\mu\textrm{g}$ㆍ1$^{-1}$), and low July 1998, January, February and September 1999 (0.05$\mu\textrm{g}$ㆍ1$^{-1}$). More than 65% of total Chl $\alpha$ was concentrated during spring and summer time between October and March. Microalgal variation appeared to be due to physical factors of seawater in the Antarctic nearshore from 1998 to 1999. The reason why micro-sized Chl $\alpha$ did not increase during austral summer was the bay had been frozen by decrease of water temperature. We think that total microalgal abundance was decreased because the summer microalgal abundance was determined by variation of water temperature during winter season. [Chl $\alpha$ concentration, Microalgal assembalges, Seasonal variation, the Antarctic nearshore].

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.168.2-168.2
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.549-550
• /
• 2007

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.435-444
• /
• 2001

WC-( $Ti_{1-x}$ A $l_{x}$) N coatings of constant changing Al concentration were deposited on S45C substrates by high-ionization sputtered PVD method. The Al concentration could be controlled by using evaporation source for Al and fixing the evaporation rate of the metals (i.e, WC- $Ti_{0.86}$A $l_{0.14}$N, WC- $Ti_{0.72}$A $l_{0.28}$N, and WC- $Ti_{0.58}$A $l_{0.42}$N). The corrosion behavior of WC-( $Ti_{1-x}$ A $l_{x}$)N coatings in a deaerated 3.5% NaCl solution was investigated by electrochemical corrosion tests and surface analyses. The measured galvanic corrosion currents between coating and substrate indicated that WC- $Ti_{0.72}$A $l_{0.28}$N coating showed the best resistance of the coating tested. The results of potentiodynamic polarization tests showed that the WC- $Ti_{0.72}$A $l_{0.28}$N coating deposited with 32W/c $m^2$ of Al target revealed higher corrosion resistance. This indicated that the WC- $Ti_{0.72}$A $l_{0.28}$N coating is effective in improving corrosion resistance. In EIS, the WC- $Ti_{0.72}$A $l_{0.28}$N coating showed one time constant loop and increased a polarization resistance of coating ( $R_{coat}$) relative to other samples. Compositional variations of WC-( $Ti_{1-x}$ A $l_{x}$)N coatings were analyzed by EDS and XRD analysis was performed to evaluate the crystal structure and compounds formation behavior. Surface morphologies of the films were observed using SEM and AFM. Scratch test was performed to measure film adhesion strength.strength. adhesion strength.strength.