• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.103-103
• /
• 2011

본 연구에서는 TiN/ZrN 복합층을 STD 61 공구강 표면에 마그네트론 스퍼터링 (magnetron sputtering) 방법을 이용하여, 표면온도, 스퍼터링 파워, 시간, 버퍼층의 두께에 따른 변수를 두어 실험하였다. 표면 특성을 알아보기 위해 OM, FE-SEM, AFM, EDS, XRD, XRR 그리고, 긋기 및 나노경도 시험을 시행하였다.

• 품질경영학회지
• /
• 제27권1호
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1322-1329
• /
• 2004

End-milling has been used widely in industrial system because it is effective to a material manufacturing with various shapes. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum mechanical vibration of main spindle, surface roughness and cutting temperature have an effect on end-milling condition such as, cutting direction, revolution of spindle, feed rate and depth of cut, etc. Therefore, this study carried to decide the working condition for optimum mechanical vibration of main spindle, surface roughness and cutting temperature using design of experiments, ANOVA and characteristic function. From the results of experimentation, mechanical vibration has an effect on revolution of spindle, radial depth of cut, and axial depth of cut. The surface roughness has an effect on cutting direction, revolution of spindle and depth of cut. And then the optimum condition used design of experiments is upward cutting In cutting direction, 600 rpm in revolution of spindle, 240 mm/min in feed rate, 2 mm in axial depth of cut and 0.25 mm in radial depth of cut. By design of experiments and characteristic function, it is effectively represented shape characteristics of mechanical vibration, surface roughness and cutting temperature in end-milling.

• 한국지리정보학회지
• /
• 제4권1호
• /
• pp.57-66
• /
• 2001

본 연구에서는 도시표면온도를 추출하기 위하여 다시기 Landsat TM band 6 영상을 이용하여 과학기술부의 4가지 모델 즉 two-point linear model, linear regression model, quadratic regression model, cubic regression model에 대하여 각각 공간분석을 실시하였으며 그 결과를 AWS(automatic weather station) 관측자료와 상관 및 회귀분석 함과 동시에 GIS 공간분석 기법을 이용하여 도시 표면온도의 공간적 분포특성을 규명하였다. Landsat TM band 6으로부터 추출된 표면온도를 기초로 하여 토지피복별 표면온도 분포를 분석한 결과 도시 및 나지 지역이 가장 높은 온도분포대를 형성하고 있었으며, 표면온도와 NDVI간의 상관분석결과 평균 -0.85 정도의 음의 상관성을 확인할 수 있었다. 이와 같은 결과는 향후 기상환경 특성을 고려한 도시계획수립에 있어 중요한 인자로 작용할 것으로 사료된다.

• 접착 및 계면
• /
• 제9권1호
• /
• pp.9-15
• /
• 2008

산소 플라즈마를 이용하여 처리시간을 다르게 하면서 EVA foam 표면의 개질을 시도하였다. EVA foam 표면 특성에 대한 플라즈마 처리 효과는 FT-IR ATR, XPS, 접촉각 측정기, SEM을 통해 연구하였으며 EVA foam의 접착특성은 박리접착강도를 측정하여 확인하였다. 플라즈마를 이용한 표면처리 결과, 유기화합물의 제거, 산소함유량의 증가, 표면의 물리적 변화 효과를 얻을 수 있었으며 EVA foam의 접착특성이 향상되었다. 플라즈마 처리 시간이 길어질수록 친수성과 EVA foam 표면의 물리적 변화가 증가하였고 각각 180초와 420초 처리에서 최대치를 나타내었다. 접착력은 420초 처리에서 최고를 나타내었으며 결과적으로 EVA foam표면의 물리적 변화가 접착력에 가장 큰 영향을 미치는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.716_717
• /
• 2009

This paper deals with the characteristic analysis & optimum design of Permanent Magnet Assisted Synchronous Reluctance Motor(PMASynRM) for Premium Efficiency Performance. The focus of this paper is characteristic analysis of d and q-axis inductances and torque according to magnetizing quantity of interior permanent magnet for PMASynRM. The d and q-axis current component ratios, load angles of a PMASynRM are investigated quantitatively on the basis of the proposed analysis method and the experimental test. Comparisons are given with output characteristic curves of normal SynRM and those according to the load in PMASynRM, respectively. And optimum design of PMASynRM is performed by Response Surface Methodology(RSM).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.844_845
• /
• 2009

Inductance and back EMF are important parameters in characteristic analysis of brushless motor. Inductance is constant value in surface permanent magnet type brushless motor. But it is change depending on the position of the rotor in interior permanent magnet type brushless motor. So this paper is considering for change inductance in characteristic analysis of brushless motor. Characteristic analysis is executed by the method that three-phase bipolar 120 degree commutation drive type.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.439-442
• /
• 2002

The interface between two different materials in the insulation systems is the weak-link in the underground power transmission systems, In this paper, Optimum conditions of the interface between Epoxy and EPDM is studied. The variation factor condition of interface is roughness of surface, spreading of oils, interfacial pressure and temperature. The breakdown times under the constant voltage below the breakdown voltage were also gained. The breakdown voltage at the after laying time equivalent to is calculated by the V-t characteristic and the inverse power law. When this is done, the characteristic life exponent n is used and the long time breakdown voltage can be evaluated.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권9호
• /
• pp.1321-1325
• /
• 2001

Color characteristics of pig ${\times}$ wild boar meat were determined with a fiber-optic spectrophotometer. The spectrophotometric characteristic of reduced-myoglobin observed after cutting immediately changed to the spectrophotometric characteristic of oxymyoglobin after 15 minutes of cutting. The spectrophotometry at 400 to 700 nm after 30, 45, 60, 90 and 120 minutes of cutting changed slightly. Compared with M. longissimus thoracis, M. rhomboideus had higher reflectance around 400 nm and from 650 to 1,100 nm and M. spinalis was lower in the visible light region after 60 minutes of cutting. The pig ${\times}$ wild boar meat was similar in reflectance shape with pork but was lower in intensity. The differences depended on the anatomical location. The M. rhomboideus from pig ${\times}$ wild boar had greatly lower reflectance than that from pig, the M. longissimus thoracis reflectance was lower, but M. spinalis reflectance hardly differed. These results showed that pig ${\times}$ wild boar meat had no special characteristic of blooming but had distinguishing characteristic of meat color among anatomical locations.

• 한국환경과학회지
• /
• 제11권3호
• /
• pp.235-240
• /
• 2002

The blocks using flyash were prepared in this study. The characteristic of sound absorption of flyash block was investigated. It was revealed that the chemical additives and flyash played an important role to determine the characteristic of sound absorption. Chemical additive affects the capability of sound absorption while flyash affects the characteristic of sound absorption, i.e. high value of the sound absorption coefficient at the specific frequencies(1KHz and 2KHz). The flyash block showed higher sound absorption coefficient than that of the commercial concrete block having carpet on the surface. It was also shown that the sound absorption coefficient increases with increase of the content of flyash in the block. However, it was found that the 70wt% of flyash in the flyash block was the optimum content to obtain the highest sound absorption coefficient.