• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.819-827
• /
• 2019

Bragg reflection of water waves by three kinds of surface-piercing fixed structures with rectangular, cosinoidal and triangular shapes is studied. Boundary element method is used to analyze the wave scattering by these structures based on the linear wave theory. Results of reflection and transmission coefficients are validated by comparing with those available in literature. These structures with proper configurations are proved to be effective in attenuating waves by using Bragg reflection, and the triangular structures are found to be the best choices among the structures with same width and same area. Systematic calculations are then carried out for the triangular structures by varying the number, the draft, the width, the gap and the combination of width and gap of the structures to analyze their influences on the characteristics of Bragg reflection. The results are of reference values for design of the structures to attenuate waves based on the Bragg reflection.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.440-448
• /
• 1999

본 논문에서는 무한 주기구조로 근사할 수 있는 전파 흡수체의 전파특성을 혼성 유한요소법을 이용하여 해석한 결과를 기술하였다. 가상의 경계면을 설정하여 유한한 영역을 정의하였고, 영역의 각각의 경계면에서 유효한 경계조건을 Floquet 이론으로부터 유도하였다. 고차 Floquet 모드가 사용되었으므로, 본 논문에서의 방법은 파장에 비교할 수 있을 정도로 큰 주기를 가진 구조의 경우에도 적용이 가능하다. 표면적분 계산의 어려움을 줄이기 위해 표면에 수직인 전자계 성분을 표면에 수평인 성분으로 표현하였다. 계산된 결과를 해석적인 해 또는 기존에 발표된 결과와 비교하여 해석의 유효성을 증명하였다.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.635-640
• /
• 2012

본 논문에서는 접지된 2개의 유전체층 위의 도체띠 격자구조에 의한 TE (Transverse Electric) 산란문제를 도체경계조건과 수치해석 방법인 FGMM (Fourier-Galerkin Moment Method)를 적용하여 해석하였으며, 이 때 유도되는 표면전류밀도는 미지의 계수와 단순한 함수인 지수함수의 곱의 급수로 전개하였다. 전반적으로, 제안된 구조에서 영역-2의 유전체층의 비유전율 ${\epsilon}_{r2}$과 유전체 층의 두께 $t_2$가 증가함에 따라 반사전력이 증가하였다. 반사전력의 급변점들은 공진효과에 기인한 것으로 과거에 wood's anomaly라고 불리워졌으며, 수치계산 결과들은 기존 논문의 결과들과 일치하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.23-23
• /
• 2009

It has been challenging to increase the thermoelectric figure of merit ($ZT=S^2{\sigma}T/\kappa$) of materials, which determine the efficiency of thermoelectric devices, because the three parameters Seebeck coefficient (S), electrical conductivity ($\sigma$), and thermal conductivity ($\kappa$) of bulk materials are inter-dependent. With the development of nanotechnology, ZT values of nanostructured materials are predicted to be enhanced by classical size effects and quantum confinement effects. In particular, Bi nanowires were suggested as one of ideal thermoelectric materials due to the expected quantum confinement effects for the simultaneous increase in Sand. In this work, we have investigated the thermal conductivity of individual single crystalline Bi nanowires with d = 98 nm and d = 327 nm in the temperature range 40 - 300 K using MEMS devices. The for the Bi nanowire with d = 98 nm was observed to be ~ 1.6 W/m-K at 300 K, which is much lower than that of Bi bulk (8 W/m-K at 300 K). This indicates that the thermal conductivity of the Bi suppressed due to enhanced surface boundary scattering in one-dimensional structures. Our results suggest that Bi nanowires grown by stress-induced method can be used for high-efficiency thermoelectric devices.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.27-33
• /
• 1997

A neural network approach has been developed to determine the depth of a surface breaking crack in a steel plate from ultrasonic backscattering data. The network is trained by the use of feedforward three-layered network together with a back-scattering algorithm for error correction. The signal used for crack insonification is a mode converted 70$^{\circ}$transverse wave. A numerical analysis of back scattered field is carried out based on elastic wave theory, by the use of the boundary element method. The numerical data are calibrated by comparison with experimental data. The numerical analysis provides synthetic data for the training of the network. The training data have been calculated for cracks with specified increments of the crack depth. The performance of the network has been tested on other synthetic data and experimental data which are different from the training data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.951-963
• /
• 2015

The water wave characteristics of Bragg reflections from a train of fixed floating pontoon breakwaters was studied numerically. A numerical model of boundary discretization type was developed to calculate the wave field. The model was verified by comparing to analytical data in literature and good agreements were achieved. Series of parametric studies were conducted systematically to investigate the dependence of the reflected coefficients by the Bragg scattering on the design variables, including the spacing between the breakwaters, the total number of installed breakwaters, the draft and width do the breakwater, and wave length. Certain wave characteristics of the Bragg reflections were observed and discussed in details which might be of help for practical engineering applications in shoreline protection from incident waves.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.913-919
• /
• 2006

본 논문에서는 스트립 폭과 격자주기, 비유전율, 유전체 층의 두께, 그리고 TE(transverse electric) 평면파의 입사각에 따른 접지된 다층 유전체위의 저항띠 격자구조에 의한 TE 산란 문제를 수치해석 방법인 FGMM(Fourier-Galerkin Moment Method)을 이용하여 해석하였다. 유도되는 표면전류밀도는 간단한 함수인 지수함수를 사용하여 Fourier 급수로 전개하였다. 전반적으로 다층유전체의 비유전율과 두께가 증가함에 따라 반사전력이 증가하였고, 반사전력의 급변점들은 공진효과에 기인한 것으로 과거에 wood's anomallies$^{[7]}$라고 불리워졌다. 제안된 방법의 검증을 위하여 기존의 완전도체 경우인 균일 저항율 R = 0에 대한 정규화된 반사전력의 수치결과는 기존 논문들과 일치하였다.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.66-71
• /
• 1998

It is required the superior materials for the parts of machines or structures, which could be endurable in severe load and environment. According to advancement of casting technology, nodular graphite cast iron is used as suitable for such condition. But nodular graphite cast iron is scattering of fatigue strength and low reliability. Therefore in this study, the effect of matrix structure and number of nodular graphite on the initiation of fatigue crack and fatigue strength. It was found that the material which has relatively high ferrite volume fraction was more easily cracked than other materials and fatigue limit was low. The material which has not found pinhole on the surface, the crack was initiated in graphite went through ferrite and propagated into through graphite, but separated graphite and ferrite grain boundary and combined with other cracks to fro large one.

• 한국전기전자재료학회논문지
• /
• 제11권7호
• /
• pp.527-534
• /
• 1998

Thin film deposition of InN, which is a less-studied III-nitride compound semiconductor because of the difficulty if crystal growth, was performed by rf reactive sputtering method using In target and $N_2$reactive gas. The structrual, electrical, and optical properties of the produced films were measured and disussed according to the sputtering parameters such as deposition pressure, rf power, and substrate temperature. From the result of deposition pressure, rf power, and substrate temperature, we could obtain optimal conditions of 5m Torr, 60W, $60^{\circ}C$ for preparing InN thin film with high crystallinity, low carrier concentration, and high Hall mobility. The carrier concentration, Hall mobility, and optical bandgap of the fabricated InN thin films at optimal condition were $6.242\times10^{18}cm^{-3}, 212.526cm^2/V\cdot$ｓ, and 1.912eV, respectively.

• 한국통신학회논문지
• /
• 제28권11A호
• /
• pp.883-890
• /
• 2003

본 논문에서는 접지된 유전체평면 위에 변하는 저항율을 갖는 저항띠 격자구조의 전자파 산란문제를 수치해석 방법인 FGMM(Fourier-Galerkin Moment Method)을 이용하여 스트립 폭 및 주기, 유전체층의 비유전율 및 두께, 입사각에 따라 수치 해석하였다. 산란전자계는 Floquet 모드함수의 급수로 전개하였다. 경계조건은 미지의 계수를 구하기 위하여 적용하였고, 저항띠 경계조건은 접선성분의 전계와 스트립의 유도전류와의 관계를 위해 이용하였다. 저항띠의 변하는 저항율은 저항띠의 양끝에서 0으로 변하는 경우를 취급하였고, 이때 유도되는 표면 전류밀도는 2종 Chebyshev 다항식의 급수로 전개하였다. 본 논문에서 변하는 저항율이 0을 갖는 도체띠에 대한 정규화 된 반사전력은 기존 논문의 결과와 매우 잘 일치하였다.