• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.905-912
• /
• 2011

In this study, the novel concept catalytic reactor was designed for water-gas shift reaction (WGS) under high pressure. The novel concept catalytic reactor was composed of an autoclave, the catalyst, and liquid water. Cu-ZnO/$Al_2O_3$ as the low temperature shift catalyst was used for WGS reaction. WGS in the novel concept catalytic reactor was carried out at the ranges of 150~$250^{\circ}C$ and 30~50 atm. The liquid water was filled at the bottom of the autoclave catalytic reactor and the catalyst of pellet type was located at the gas-liquid water interface. It was concluded that WGS reaction occurred over the surface of catalysts partially wetted with liquid water. The conversion of CO for WGS was also controlled with changing content of Cu and ZnO used as the catalytic active components. Meanwhile, the catalyst of honey comb type coated with Cu-ZnO/$Al_2O_3$ was used in order to increase the contact area between wet-surface of catalyst and the reactants of gas phase. It was confirmed from these experiments that $H_2$/CO ratio of the simulated coal gas increased from 0.5 to 0.8 by WGS at gas-liquid water interface over the wet surface of honey comb type catalyst at $250^{\circ}C$ and 50 atm.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.130-136
• /
• 2008

$xTiO_2$-$ySiO_2$ system photocatalysts were developed by sol-gel method based on the change of production parameters, and their structure of crystallization and the specific surface area were measured. Considering the efficiency of the ethanol and phenol degradation using the catalyst, the conclusions were obtained as follows: By means of X-ray analysis of $xTiO_2$-$ySiO_2$ powder that is obtained from Titanium and Silicon alkoxide by sol-gel process, it is shown that crystal structure of anatase type is a dominating structure and, on the other hand, the structure of rutile also partly exists. The increase of $SiO_2$ contents causes the decrease of the degree of crystallization of the gel, whereas the specific surface area preferentially increases. It is shown that more than 90% of ethanol and phenol are degraded when reaction time is about three and an hours, and the maximum degradation rate of ethanol and phenol is shown in $60TiO_2$-$40SiO_2$ catalyst.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.331-335
• /
• 2019

In this study we investigate catalytic activity and selectivity of mixture of Ag and ketjenblack according to their ratios by product analysis and electrochemical experiments, such as cyclic voltammetry, linear sweep voltammetry and chronoamperometry. We reveal that catalytic activity toward CO₂ reduction to CO is improved by simple mixing Ag nanoparticle and ketjenblack because addition of ketjenblack suppresses aggregation of Ag nanoparticles and brings increase in electrochemical active surface area. However, excess amount of ketjenblack rather inhibit the CO₂ reduction to CO. These observations provide clues to develop highly active Ag catalyst or electrode toward electrochemical reduction of CO₂.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.223-226
• /
• 2005

For $CO_2-free$ hydrogen production and better utilization of the produced carbon, catalytic decomposition of methane over rubber-grade carbon blacks manufactured from coal tar was carried out. The catalytic activities of several domestic carbon blacks were compared. A pelletized carbon black exhibited considerably lower activity and activation energy than the fluffy( loose) carbon black of the same grade. This difference is considered due to the binder that was added during pelletization. For pelletized carbon blacks, a tendency was observed that the activity per unit mass of catalyst increased with the specific surface area of the carbon black. Another tendency was also observed that the activation energy increased with the primary particle size or decrease of the specific surface area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.135.2-135.2
• /
• 2010

Carbon nanotube(CNT) has been spotlighted as a promising candidate for catalyst support material for PEMFC (proton exchange membrane fuel cell). The considerable properties of CNT include high surface area, outstanding thermal, electrical conductivity and mechanical stability. In this study, to fully utilize the properties of CNTs, we prepared directly oriented CNT on carbon paper as a catalyst support in the cathode electrode. The CNT layer was prepared by a chemical vapor deposition(CVD) process. And the Pt particles were deposited on the CNT oriented carbon paper by impregnation and eletro-deposition method. The potential advantages of directly oriented CNT on carbon paper can include improved thermal and charge transfer through direct contact between the electrolyte and the electrode and enhanced exposure of Pt catalyst sites during the reaction.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2650-2656
• /
• 2013

Mesoporous alumina was synthesized using bayberry tannin (BT) as template. This novel synthesis strategy was based on a precipitation method associated with aluminum nitrate as the source of aluminum in an aqueous system. $N_2$ adsorption/desorption, XRD, SEM and TEM were used to characterize the as-prepared mesoporous alumina. The results showed that the mesoporous alumina possessed crystalline pore wall, high specific surface area, narrow pore distribution and excellent thermal stability. Moreover, the surface area and pore size of the mesoporous alumina can be tuned by changing the experimental parameters. Further, the mesoporous alumina was investigated as the support of palladium catalyst ($Pd-Al_2O_3{^*}$) for the hydrogenation of propenyl, styrene and linoleic acid. For comparison, the reference catalyst ($Pd-Al_2O_3$) prepared without barberry tannin was also employed for the catalytic hydrogenation. The experimental results showed that $Pd-Al_2O_3{^*}$ exhibited the superior catalytic performance than $Pd-Al_2O_3$ for all the investigated substrates, especially for the hydrogenation of linoleic acid with larger molecular.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.880-883
• /
• 2004

Carbon nanofibers could be selectively formed at the groove area of the MgO substrate using microwave plasma-enhanced chemical vapor deposition system. Iridium metal was used as a catalyst layer for the formation of the carbon nanofibers. The growth direction of the carbon nanofibers was vertical to the substrate surface. The selectively grown iridium-catalyzed carbon nanofibers show around $1.8V/{\mu}m$ turn-on voltage and $1.0\;mA/cm^2$ field emission current density at $2.65\;V/{\mu}m$ in the field emission measurement.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.178-182
• /
• 2010

Simultaneous removal reaction for NOx, soot over Pt catalysts using various $TiO_2$ as support was studied. The catalytic tests ware carried out injectin NO, soot, NO and soot simultaneously on each catalysts. As results, it showed different NOx removal efficiency and soot oxidation rate according to various kinds of $TiO_2$. Onset temperature of soot oxidation has a correlation to $NO_2$ generated for the independently performed NOx. It was investigated that NO to $NO_2$ oxidation was intimately related to crystallite size and surface area, and it has a tremendous impact on Pt aggregation on the catalyst surface and catalyst' reducibility. Therefore, we concluded that major index of the reaction was physico-chemical properties of catalyst' supports.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.208-211
• /
• 2007

Polymer Electrolyte Membrane fuel cell(PEMFC)의 촉매로는 주로 carbon을 지지체로 사용한 Pt/C 흑은 Pt alloy/C을 사용하게 된다. 이때 PEMFC의 상용화에 있어 촉매의 안정성은 상용화 실현에 있어 중요한 요인으로 인식되고 있다. 촉매의 성능 저하는 Pt의 활성 면적(Active surface area)의 감소가 원인으로 얘기되어 지고 있으며 이는 지지체로 사용한 탄소에 나노 크기로 분산되어 있던 Pt 입자가 커지면서 활성 면적이 감소되어 지기 때문이다. 이번 연구에서는 상용 Pt/C를 사용하여 Cyclic Voltammetry(CV)의 장기간 운전 및 다양한 조건 변화를 통하여 Pt입자의 크기 증가에 미치는 요인에 대한 연구를 진행하였다. 이와 더불어 Linear Sweep Voltammety(LSV), TEM, 등을 통한 분석이 진행되었다.

• 한국전기화학회:학술대회논문집
• /
• 2001.06a
• /
• pp.203-208
• /
• 2001