• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.86-90
• /
• 2009

In November 2008, typical powdery mildew symptoms were observed on leaves of Arabidopsis thaliana ecotype Col-0 plants in a growth room under controlled laboratory conditions at Korea University, Seoul. The disease was characterized by the appearance of white powder-like fungal growth on the surface of infected leaves. As the disease progressed, infected leaves exhibited chlorotic or necrotic brown lesions, and leaf distortion and senescence. Conidiophores of the causal fungus were hyaline, unbranched, 3-4 celled, cylindrical, and $80-115{\times}6-9{\mu}m$ in size. Singly produced conidia (pseudoidium type) were hyaline, oblong to cylindrical or oval in shape, and $26-55{\times}15-20{\mu}m$ in size with a length/width ratio of average 3, angular/rectangular wrinkling of outer wall and no distinct fibrosin bodies. Appressoria on the hyphae were multi-lobed. These structures are typical of the powdery mildew Oidium subgenus Pseudoidium, anamorph of the genus Erysiphe. The measurements of the fungal structures coincided with those of Erysiphe cruciferarum. The phylogenetic analysis using ITS rDNA sequences revealed that the causal fungus Erysiphe sp. KUS-F23994 is identical to E. cruciferarum. The isolated fungus incited powdery mildew symptoms on the inoculated Arabidopsis leaves, which proved Koch's postulates. Taken all data together, we first report the occurrence of powdery mildew disease of A. thaliana caused by Erysiphe cruciferarum in Korea.

• Water for future
• /
• v.7 no.2
• /
• pp.75-82
• /
• 1974

본시험은 관개 및 배수 설계를 위한 기초자료 제공을 목적으로 토양수분 및 지하수위의 변화상태를 구명하고자 하는 것으로 카나다 퀴백(Quebec) 지방 저지대의 대표적인 2종의 태양인 점토와 사질로움 토양에 대해서 일차적으로 지표, 지하배수간의 토양수분과 지하수위의 변화를 연구분석한 것으로 그 결과를 요약하면 다음과 같다. 1. 2종의 토양(점토, 사질로움)에 있어서 공히 토양수분은 지표로부터 지하로 내려갈수록 증가되는 상태를 나타냈으면 이는 하층토로 내려감에 따라 팽창된 치밀한 토양 조직을 가지고 있음을 시사하며 2. 동기에 있어서는 지표로부터 12inch 깊이의 토양수분이 더 깊은 18inch나 24inch 깊이의 토양수분보다 증가된 상태를 유지하였다. 이는 토양내의 빙결막이나 지표면의 눈 또는 어름에 영향으로 생각되며 이 경향은 점토질 토양에서 보다 토양내 빙결막으로의 수분 이종을 조장해주는 투수 계수가 큰 사질로움 토양에서 더 높았다. 3. 양식험구 공히 지표에서 얕은 지하 0∼3inch 이내의 토양수분은 항우를 전후해서 급격한 변화를 가져왔다. 여기에서 수분의 급상승은 호우시나 표층토가 하층토의 토양수분에 영향을 주는 항우이전에 포장용수량(Field capacity)에 달했기 때문에 급항하는 지표면의 물 분자가 열에너지에 의해 증발산되고 천층에 산재한 초, 수근에 의해 소비되는 때문인 것으로 사료된다. 4. 지하수위하의 토양수분은 포화에 달하여 거의 일정할 것으로 기대되었지만 실제로 많은 변화를 가져왔다. 이들 변화에는 부분적으로 토양사극이 지하수위하이라도 채워지지 않았거나(Capillary pressure가 작을 시) 혹은 관측기간 중에 토양의 융기와 수축에 기인된다고 생각된다. 5. 지하배수구가 지표배수구에 비해 지하수위항하가 빨랐음은 물론 사질로움 토양에서는 보다 높은 투수계수로 인해서 지하수위의 항하가 점토질 토양에서 보다 훨씬 빨랐음을 보여주고 있다.표시할 수 있다.된다.acid $0.41{\sim}0.65%$, 오미자는 malic acid $1.51{\sim}3.90%$, citric acid $2.40{\sim}3.92%$로 주요 유기산이 있다. 타닌은 물보다 에탄올 추출물이 다소 함량이 높았으며 특히 오갈피는 $3.35{\sim}3.85%$로 매우 높은 함량이었다.a 6 cases, etc. 2. The retroperitoneal space including kidneys were the most commonly involved site (43.5%), of which Wilms' tumor was the commonest. 3. About 2/3 of tumors developed under the age of 6 and the commonest lesion was Wilms' tumor and the next being neuroblastoma, teratoma, ovarian cyst and so forth. 4. In all tumors except ovarian tumor and choledochal cyst, male was more frequently affected. 5. In plain abdomen 75% of neuroblastoma crossed the mid line while in Wilms' tumor only 2 cases (14%) showed midline cross. Calcific density was 입력불가 in all 6 cases of teratoma (100%) as dense and discrete ossification, in 3 case of neuroblatoma (38%) characteristically in diffuse stippled appearance and in one case

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.875-884
• /
• 2011

The purpose of this study was to examine the qualities of optimized muffins with germinated brown rice soaked in mycelial culture broth of Phellinuslinteus (GBRP) using response surface methodology. Firstly, general compositions of optimized muffins with GBRP were higher than that of control and total sugar contents were similar. However, the total free amino acid and constitutional amino acid contents except for GABA were lower than those of control. Starch hydrolysis in control was higher than in optimized muffins with GBRP, whereas protein digestibility and protein efficiency ratio were not. The weights of optimized muffins with GBRP were higher than that of control (p<0.01), whereas height (p<0.01) and pH (p<0.001) were similar. The hardness (p<0.05) and chewiness (p<0.05) of optimized muffins with GBRP were higher compared to control; adhesiveness, springiness, and gumminess were similar, but cohesiveness (p<0.01) was not. The flavor (p<0.05) and taste (p<0.01) of optimized muffins with GBRP were higher than those of control; appearance, texture and overall acceptability were similar, but color (p<0.05) was not. The total polyphenol contents (p<0.01), DPPH radical scavenging activity (p<0.01), and superoxide dismutase-like activity (p<0.05) of optimized muffins with GBRP were higher than those of control, but nitrite scavenging activity was similar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.510-519
• /
• 2019

The aim of this study was to set a defect classification framework and evaluate the defect risks in apartment buildings For this, approximately 15,056 defect items for 133 apartment buildings were examined. As a result of the analysis, the major defect of the RC work was cracks, which were found mainly in public locations. Moreover, the RC work was found to exhibit a high defect risk of water problem and surface appearance, which are highly connected with cracks. Second, the finish work has a high defect risk because it is composed of various work types, and there are many kinds of materials and construction parts involved. Third, the major defects of the waterproof work were incorrect installation and missing tasks, which have high defect risks in the garage. This is because defects that require rework occur mainly in the underground garage. Based on these results, this study proposed countermeasures for defect risk management to be considered in the construction, handover, post-handover, and occupancy phases. These have been set in detail based on the three zones: low frequency high severity (LFHS), low frequency low severity (LFLS), and high frequency low severity (HFLS).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.429-433
• /
• 2014

In 2012, a pink mold rot was observed on apple (Malus pumila var. dulcissima Koidz.) at the Wholesale Market for Agricultural Products, Jinju, Korea. The first symptom of pink mold rot on apple fruit is a water-soaked appearance of the affected tissue and surface fruit formed pink mold rot, then became brown and produced a mass of powdery pink conidia spores. Colony was fast growing colonies, pinksh, zonate in diurnal rhythm, powdery from conidia. Optimum temperature for mycelial growth was $25^{\circ}C$. Conidia were hyaline, smooth, two-celled, thick-walled conidia with truncate bases, ellipsoidal to pyriform, and characteristically held together zig-zag chains and $12-26{\times}8-12{\mu}m$ in size. Conidiophore was erect, colorless, unbranched, and $4-5{\mu}m$ wide. On the basis of mycological characteristics, pathogenicity test, and molecular identification with the ITS region, the causal fungus was identified as Trichothecium roseum (Pers.) Link ex Gray.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.4
• /
• pp.362-372
• /
• 2010

In order to understand what leads to the appearance of harmful Chattonella algae in the Yeosu coastal waters of Korea, we measured environmental parameters every week at one station from May to November, 2006, and April to October, 2007. Four species of Chattonella appeared during the monitoring period: C. antiqua, C. globosa, C. marina and C. ovata. The range of water temperature and salinity were $15.0-27.9^{\circ}C$ and 17.6~33.0 psu, respectively, when Chattonella appeared, and their maximum cell density (4,840 cells/L) was at $27.1^{\circ}C$ and 33.0 psu. During the monitoring periods, the range of dissolved inorganic nitrogen (DIN), phosphate (DIP) and chlorophyll $\alpha$ (Chl-$\alpha$) concentrations in surface waters were $1.20-52.23\;{\mu}M$ ($8.59{\pm}8.97\;{\mu}M$), $0.03-1.56\;{\mu}M$ ($0.47{\pm}0.31\;{\mu}M$) and $0.45-31.12\;{\mu}g/L$ ($3.58{\pm}4.77\;{\mu}g/L$), respectively. Chattonella occurred at low cell density when the Chl-$\alpha$ concentration increased because of supplied nutrients, whereas their cell density increased during the periods of rapid decrease in Chl-$\alpha$. The results of growth experiments based on batch culture showed that the half saturation constant ($K_s$) of C. antiqua on ammonium (${NH_4}^-$), nitrate (${NO_3}^-$) and phosphate (${PO_4}^{2-}$) were $3.89{\mu}M$, $5.01\;{\mu}M$ and $0.63\;{\mu}M$, respectively. These Ks values are higher than those reported for diatoms and other flagellates at the DIP concentration (average $0.47{\mu}M$) of Yeosu coastal waters. Although the maximum specific growth rate (${\mu}_{max}$) of C. antiqua was lower than diatoms, it was higher than those of other flagellates. Therefore, our results indicate that the DIP level in the study area was too low to support Chattonella blooms, although Chattonella species have physiological characteristics that enable them to grow more rapidly than other flagellates when nutrient levels are higher than their $K_s$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.994-1001
• /
• 2007

Changes in shear force value, transverse sections, myofibrils and intramuscular connective tissue of bovine skeletal muscle exposed to the combination of high-pressure up to 400 MPa and heat (30 and $60^{\circ}C$) were studied. The shear force value decreased by pressure-heat treatment up to 200 MPa at 30 and $60^{\circ}C$, and then slightly increased over 200 MPa at $30^{\circ}C$. Shear force values of treated muscles were lower than those of untreated ones. Gaps between muscle fibers in the untreated muscle were a little clear, and then they became very clear in the treated muscles up to 200 MPa at 30 and $60^{\circ}C$. However, the gaps reduced significantly over 200 MPa at $30^{\circ}C$. The remarkable rupture of I-band and loss of M-line materials progressed in the myofibrils with increasing pressure applied. However, degradation and loss of the Z-line in myofibrils observed in the muscle treated at $60^{\circ}C$ was not apparent in the muscle treated at $30^{\circ}C$. The length of the sarcomere initially contracted by pressure-heat treatment of 100 MPa at $30^{\circ}C$ seemed to have recovered with increase of the pressure up to 400 MPa. In the muscle treated at $60^{\circ}C$, the length of sarcomere gradually decreased with increase of the pressure up to 400 MPa. In the treated muscles, changes in the honeycomb-like structure of endomysium were observed and accelerated with increase of the pressure. A wavy appearance clearly observed at the inside surface of endomysium in the untreated muscles gradually decreased in the treated muscles with increase of the pressure. Tearing of the membrane was observed in the muscles treated over 150 MPa at $30^{\circ}C$, as observed in the sample pressurized at 100 MPa at $60^{\circ}C$. The roughening, disruption and fraying of the membrane were observed over 200 MPa at $60^{\circ}C$. From the results obtained, the combination of high-pressure and heat treatments seems to be effective to tenderize tough meat. The shear force value may have some relationship with deformation of intramuscular connective tissue and myofibrils.

• Conservation Science in Museum
• /
• v.17
• /
• pp.55-68
• /
• 2016

Conservation and research efforts are currently underway at the National Museum of Korea on a series of artifacts excavated from Tomb No. 9 at Seogam-ri nearly a century ago by an archaeology team from the institution's colonialera predecessor. Among these objects are a number of bronze and gilt bronze buttons. The present study explores the production techniques used in making such buttons. Both bronze and gilt bronze buttons are hemispherical in shape and are similar in external appearance. However, their shanks differ significantly in size and cross-sectional shape, some with a round cross-section while others are square. The buttons, first sorted into two groups by each type of shank, were further subdivided by size. Analysis of round shanks has found variations in design and location as well as in shank thickness. In addition, the location where round shanks attach to buttons are usually irregular in surface. Square shanks, on the other hand, are more uniform in design and location. The shanks are typically located on the backs of buttons and attach to a groove which ostensibly serves to mark the correct position. X-ray imaging has revealed that round shanks have thick borders made from metal rather than dirt or other material. The buttons themselves appear to been cast using lost-wax technique. The ways in which each shank attaches to its respective button varies based on its cross-sectional shape.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.260-265
• /
• 2002

Microbiologically influenced Corrosion (MIC) is one of the most deleterious effects of metal microbe interactions. When a fresh metal surface comes in contact with a non-sterile fluid, biofilm formation is ensued. This might result in the initiation of corrosion. The sites and materials where MIC is implicated are versatile. Industries such as shipping, power generation, chemical etc are reported to be affected. The rapid and unexpected failure of AISI type 304 stainless steel was investigated in the laboratory by simulation studies for a period of 4 months. Slime and water samples from the failure site were screened for corrosion causing bacteria. Both aerobic and anaerobic nora were enumerated and identified using PCR techniques. Pseudomonas sp. and Bacillus sp. were the most common aerobic bacteria isolated from the water and slime samples, whilst sulfate reducing bacteria (SRB) were the major anaerobic bacteria. The aerobic bacteria were used for the corrosion experiments in the laboratory. Coupon exposure studies were conducted using a very dilute (0.1%V/V) nutrient broth medium. The coupons after retrieval were observed under a Scanning Electron Microscope (SEM) for the presence of MIC pits. Compared to sterile controls, metal coupons exposed to Pseudomonas sp and Bacillus sp. showed the initiation of severe pitting corrosion. However, amongst these two strains, Psudomonas sp. caused pits in a very short span of 14 days. Towards the end of the experiment, severe pitting was observed in both the cases. The detailed observation of pits showed they vary both in number and shapes. Whilst the coupons exposed to Bacillus sp. showed widely spread scales like pits, those exposed to Pseudomonas sp. showed smaller and circular pits, which had grown in number and size by the end of the experiment. From these results it is inferred that the rapid and unexpected failure of 304 SS might be due to MIC. Pseudonwnas sp. could be considered as the major responsible bacteria that could initiate pits in the metallic structures. As the appearance of pits was different in both the tested strains, it was thought that the mechanisms of pit formation are different. Experiments on these lines are being continued.