• 한국결정성장학회지
• /
• 제27권4호
• /
• pp.191-195
• /
• 2017

본 연구에서는 공기 정화식 마스크의 필터로 사용되는 일반적인 부직포와 전기방사 나노섬유가 코팅된 부직포에 대한 미세 구조를 분석하고 미세먼지 차단 특성을 향상 시킬 수 있는 새로운 마스크 디자인을 제안하였다. 평균적으로 $25{\mu}m$의 직경을 갖는 부직포 섬유와 달리 전기방사 방법으로 형성된 나노섬유는 그 직경이 25 nm~120 nm로 매우 작아 비표면적이 크고, 불규칙적으로 배열된 촘촘한 그물방 구조를 갖고 있었다. 일반적인 부직포 필터는 부직포 섬유 표면의 정전기력에 의해 미세먼지를 흡착할 수 있었지만, 수십 ${\mu}m$ 크기 이상의 기공이 부직포 전반에 걸쳐 존재하기 때문에, 수 ${\mu}m$ 크기를 갖는 미세먼지를 여과하는데 한계가 있었다. 반면 나노섬유가 코팅된 부직포 필터의 경우, 나노섬유의 구조적 특성으로 인해 투과성과 통기성을 유지하면서 수 ${\mu}m$ 크기의 미세먼지를 기계적으로 흡착하여 효과적으로 여과할 수 있었다. 우수한 마스크 필터의 성능과 더불어 올바른 마스크 착용이 미세먼지 차단 특성을 극대화 할 수 있는데, 이를 위해 안면부와 마스크 사이의 틈으로 미세먼지의 유입을 막을 수 있도록 안면부에 밀착이 잘 될 수 있는 새로운 마스크 디자인을 제안하였다.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.199-208
• /
• 2008

HI decomposition was conducted using Pt/C-based catalysts with a fixed-bed reactor in the range of 573 K to 773 K. To examine the change of the characteristic properties of the catalysts, $N_2$ adsorption analyser, a X-ray diffractometer(XRD), and a scanning electron microscopy(SEM) were used before and after the HI decomposition reaction. the effect of Pt loading on HI decomposition was investigated by $CO_2$-TPD. HI conversion of all catalysts increased as decomposition temperature increased. The XRD analysis showed that the sizes of platinum particle became larger and agglomerated into a lump during the reaction. From $CO_2$-TPD, it can be concluded that the cause for the increase in catalytic activity may be attributed to the basic sites of catalyst surface. The results of both b desorption and gasification reaction showed the restriction on the use of Pt/C-based catalyst.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.200-205
• /
• 2016

With high specific surface area and pore structural diversity, MOFs show important applications in gas storage, catalysis, sensing, separation, and biomedicine. However, the stability of the structure of MOFs has restricted their application and development. In this study, zirconium metal organic frameworks with 9,10-dicarboxylic acid anthracene as ligand, named UIO-66 ($H_2DCA$), were synthesized and their properties and structures were characterized by XRD, SEM, and $N_2$ adsorption. We focus on the stability of the structure of UIO-66 ($H_2DCA$) under different conditions (acid, alkali, and water). The structural changes or ruins of UIO-66 ($H_2DCA$) were traced by means of XRD, TG, and FT-IR under different conditions. The results show that the UIO-66 ($H_2DCA$) materials are stable at 583 K, and that this structural stability is greatly influenced by different types of acid and alkali compounds. Importantly, we found that the structures maintain their stability in environments of nitric acid, triethylamine, and boiling water.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.707-711
• /
• 2013

Carbon nanotubes(CNT) has strength and chemical stability, greatly conductivity characteristics. In particular, MWCNT (multi-walled carbon nanotubes) show rapidly resistance sensitive for changes in the ambient gas, and therefore they are ideal materials to gas sensor. So, we fabricated NOx gas sensors structured MOS-FET using MWCNT (multi-walled carbon nanotubes) material. We investigate the change resistance of NOx gas sensors based on MOS-FET with ultra lean NOx gas concentrations absorption. And NOx gas sensors show sensitivity on the change of gate-source voltage ($V_{gs}=0[V]$ or $V_{gs}=3.5[V]$). The gas sensors show the increase of sensitivity with increasing the temperature (largest value at $40^{\circ}C$). On the other hand, the sensitivity of sensors decreased with increasing of NOx gas concentration. In addition, We obtained the adsorption energy($U_a$), $U_a$ = 0.06714[eV] at the NOx gas concentration of 8[ppm], $U_a$ = 0.06769[eV] at 16[ppm], $U_a$ = 0.06847[eV] at 24[ppm] and $U_a$ = 0.06842[eV] at 32[ppm], of NOx gas molecules concentration on the MWCNT gas sensors surface with using the Arrhenius plots. As a result, the saturation phenomena is occurred by NOx gas injection of concentration for 32[ppm].

• 전기화학회지
• /
• 제2권2호
• /
• pp.106-111
• /
• 1999

[ $CaNi_5$ ] 수소저장합금의 전기화학적 충$\cdot$방전 특성에 미치는 MG(mechanical grinding) 영향이 Ar및 $H_2$ 가스분위기에서 조사되었다 MG공정중 $CaNi_5$ 합금은 표면 산화층의 파괴와 재생성 및 산화층 근방의 불균질화로 인하여 MG 15시간 이후부터 CaO와 Ni로 뚜렷한 상분리가 일어났다. $MG-CaNi_5$는 MG시간이 길어질수록 초기의 전기화학적 방전용량은 현저히 감소하였지만 충$\cdot$방전 싸이클의 증가에 따른 용량저하 속도는 $CaNi_5$합금에 비하여 낮았다. MG처리된 $CaNi_5$합금의 퇴화는 MG공정중의 상분리 및 불규칙화에 의한 수소의 가역반응 site의 감소 및 분극저항의 증가, KOH 전해질 내에서 합금 표면의 산화반응에 의한 부동태 피막형성에 기인하는 것으로 판단되었다.

• 대한화학회지
• /
• 제21권4호
• /
• pp.246-255
• /
• 1977

여러 종류의 層間 陽이온을 가지고 있는 層狀 硅酸鹽上에서 일어난 methylmethacrylate의 吸着에 關하여 赤外線 分光法과 X-ray로 硏究하였다. 吸着된 methylmethacrylate의 여러 개의 特性 carbonyl band가 陽이온의 種과 脫水溫度에 따라서 다르게 1723∼1547$cm^{-1}$의 範圍에서 나타났다. 190$cm^{-1}$程度로 shift한 carbonyl 伸縮 band는 polyvalent 陽이온에만 나타났으며 $>C=O{\cdot}{\cdot}{\cdot}M^{n+}$型 着物形成 基因하는 것이었다. 1703∼1640$cm^{-1}$에서 나타난 band는 carbonyl 酸素와 陽이온 水 또는 陽이온 水酸基와의 水素結合에 依한 것이었고 shift한 정도는 層間 陽이온의 polarizing power와 좋은 相互 關係를 이루었다. 그러나 1723$cm^{-1}$에서 나타난 band는 陽이온의 鍾과는 相互 關係가 없었으며 carbonyl ,酸素와 表面 水酸基와의 相互 作用으로 因한 것이었다. Interlamellar spacing을 계산해 본 結果 methylmethacrylate의 分子平面은 硅酸鹽의 層과 平行하게 놓여 있는 것 같다.

• 에너지공학
• /
• 제7권1호
• /
• pp.35-43
• /
• 1998

본 연구에서는 Pt/C와 Pt-Ru/C 촉매를 이용하여 직접메탄올 연료전지용 연료극 전극을 제조하고 전극 및 메탄올 산화 특성에 대하여 고찰하였다. 전극은 SEM, TEM 및 열중량 분석을 통하여 특성을 조사하였다. 메탄올의 산화 특성은 1M CH3OH+1M H2SO4 용액에서 정전위/정전류계를 이용하여 반전지 시험 및 순환 전압-전류법으로 조사하였다. 연구결과를 통하여 메탄올 산화전극은 촉매층 내에 PTFE가 20w% 포함되었을 경우가 백금촉매의 이용률이 높고 우수한 성능을 보여 주었다. Pt-Ru/C 이원촉매는 Pt/C 촉매에 비하여 메탄올 산화특성이 우수하고 성능이 우수한 촉매임을 알 수 있었다. Pt/Ru/C와 Pt/C 촉매를 이용하여 제조한 전극의 메탄올 산화반응에 대한 활성화 에너지는 11.60 kJ/mol과 26.85 kJ/mol이었다.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.679-687
• /
• 2007

Nanoscale zero valent ion (nZVI) technology is emerging as an innovative method to treat contaminated groundwater. The activity of nZVI is very high due to their high specific surface area, and supporting this material can help to preserve its chemical nature by inhibiting oxidation. In this study, nZVI particles were attached to granular ion-exchange resin through borohydride reduction of ferrous ions, and chemical reduction of nitrate by this material was investigated as a potential technology to remove nitrate from groundwater. The pore structure and physical characteristics were measured and the change by the adsorption of nZVI was discussed. Batch tests were conducted to characterize the activity of the supported nZVI and the results indicated that the degradation of nitrate appeared to be a pseudo first-order reaction with the observed reaction rate constant of $0.425h^{-1}$ without pH control. The reduction process continued but at a much lower rate with a rate constant of $0.044h^{-1}$, which is likely limited by mass transfer. To assess the effects of other ions commonly found in groundwater, the same experiments were conducted in simulated groundwater with the same level of nitrate. In simulated groundwater, the rate constant was $0.078h^{-1}$ and it also reduced to $0.0021h^{-1}$ in later phase. The major limitation in application of ZVI for nitrate reduction is ammonium production. By using a support material with ion exchange capacity, the problem of ammonium release can be solved. The ammonium was not detected in the batch test, even when other competitive ions such as calcium and potassium existed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.117-121
• /
• 2006

Virgin bleached kraft pulp, CPO (computer printout) and white ledgers are main raw materials used in tissue mills. The utilization rate of recycled fibers and virgin pulp in South Korea tissue industry are 90% and 10%, respectively. To improve brightness of printing grades the use of 'fluorescent whitening agents (FWAs)' or 'optical brightening agents (OBAs)' has been increased. When recycling these papers for tissue production, it is unavoidable that FWAs contained in recycled papers flow into tissue production lines and remain in the products. And this draws great attention from the public. This study was carried out to develop a technology for the removal of fluorescent whitening agents from recycled fibers. Enzymatic removal of FWAs was evaluated as a method to remove FWAs from the recycled fiber. The ${\alpha}-amylase$ that degrades starched used for surface sizing of fine papers and contained substantial condition is needed to prevent the re-adsorption of FWAs on fibers. The temperature of pulp suspension was another important factor affecting on FWA removal. The higher the temperature, the greater the efficiency of removing FWAs was obtained. Optimum pH and temperature for the effective removal of FWAs were suggested to be pH 8.5 and $65^{\circ}C$, respectively. The enzymatic removal of FWAs showed a great synergistic effect when proper control in pH and temperature was made.