• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.232-234
• /
• 1996

We have investigated the effect of molecular structure of polymer of rubbed polyimide (PI) films for surface liquid crystal alignment. To obtain surface alignment effect of Polymer molecular structure, we measured the polar (out of plane-tilt) anchoring strength and surface ordering of 5CB on rubbed PI surfaces. We have found that the polar anchoring strength of 5CB is depend on the polymer molecular structure of these unidirectionally rubbed PI surfaces.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.136-136
• /
• 2013

High-resolution photoemission spectroscopy (HRPES) measurements were collected and density functional theory (DFT) calculations were conducted to track the coverage dependent variation of the absorption structure of 2-thiophenecarboxaldehyde (C4H3SCHO: TPCA) on the Ge(100) surface at room temperature. In an effort to identify the most probably adsorption structures on the Ge(100) surface, we deposited TPCA molecules at a low coverage and at a high coverage and compared the differences between the electronic features measured using HRPES. The HRPES data provided three possible adsorption structures of TPCA on the Ge(100) surfaces, and DFT calculations were used to determine the plausibility of the structures. HRPES analysis, corroborated by DFT calculations, indicated that an S-dative bonded structure was the most probable adsorption structure at relatively lower coverage levels, the [4+2] cycloaddition structure was the second most probable structure, and the [2+2]-C=O cycloaddition structure was the last probable structure on the Ge(100) surfaces at relatively higher coverage levels.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.57-64
• /
• 2021

In recent materials industry, researches on the technology to manufacture super hydrophobic surface by effectively controlling the wettability of solid surface are expanding. Research on the fabrication of super hydrophobic surface has been studied not only for basic research but also for self-cleaning, anti-icing, anti-friction, flow resistance reduction in construction, textile, communication, military and aviation fields. A super hydrophobic surface is defined as a surface having a water droplet contact angle of 150 ° or more. The contact angle is determined by the surface energy and is influenced not only by the chemical properties of the surface but also by the rough structure. In this paper, maskless lithography using DMD, electro etching, anodizing and hot embossing are used to make the polymer resin PMMA surface super hydrophobic. In the fabrication of microstructure, DMDs are limited by the spacing of microstructure due to the structural limitations of the mirrors. In order to overcome this, maskless lithography using a transfer mechanism was used in this paper. In this paper, a super hydrophobic surface with micro and nano composite structure was fabricated. And the wettability characteristics of the micro pattern surface were analyzed.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.40-43
• /
• 2009

The authors fabricated a nanopatterned surface on a GaN thin film deposited on a sapphire substrate and used that as an epitaxial wafer on which to grow an InGaN/GaN multi-quantum well structure with metal-organic chemical vapor deposition. The deposited GaN epitaxial surface has a two-dimensional photonic crystal structure with a hexagonal lattice of 230 nm. The grown structure on the nano-surface shows a Raman shift of the transverse optical phonon mode to $569.5\;cm^{-1}$, which implies a compressive stress of 0.5 GPa. However, the regrown thin film without the nano-surface shows a free standing mode of $567.6\;cm^{-1}$, implying no stress. The nanohole surface better preserves the strain energy for pseudo-morphic crystal growth than does a flat plane.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.599-612
• /
• 2020

A combination of a gravity wall and an anchor beam is widely used to support the high soil deposit on rock mass. In this study, two groups of shaking table test were performed to investigate the responses of such combined retaining structure, where the rock masses were shaped with a flat surface and a curved surface, respectively. Meanwhile, the dynamic numerical analysis was carried out for a comparison or an extensive study. The results were studied and compared between the combined retaining structures with different shaped rock masses with regard to the acceleration response, the earth pressure response, and the axial anchor force. The acceleration response is not significantly influenced by the surface shape of rock mass. The earth pressure response on the combined retaining structure with a flat rock surface is more intensive than the one with a curved rock surface. The anchor force is significantly enlarged by seismic excitation with a main earthquake-induced increment at the first intensive pulse of Wenchuan motion. The value of anchor force in the combined retaining structure with a flat rock surface is generally larger than the one with a curved rock surface. Generally, the combined retaining structure with a curved rock surface presents a better seismic performance.

• 한국실내디자인학회논문집
• /
• 제23권3호
• /
• pp.29-38
• /
• 2014

This paper is to analysis covering and exposing elements through surface in the spirit of the time through the meaning of relationship between structure and symbol(ornament) in the theory of dressing of Gottfrid Semper. In other words, The purpose is to illuminate how complementary tectonic between structure and symbolic of an architecture surface is expressed in accordance with the biased required conditions relating with the paradigm of the era. The advancement of the new method of tectonic and the new aesthetic taste have a deep relation with the reconsidering the dichotomy classification discussing a dominant position between structure and symbol(ornament). Expression of surface representing the era comes across the combined interpretation of technology, structure, and the non-physical culture's art of the community and the era.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.215-224
• /
• 2008

The present study aims to design a multilayer microstrip antenna with composite sandwich construction and investigate fatigue behavior of this multilayer SAS (surface antenna structure) that was asymmetric sandwich structure for the next generation of structural surface technology. This term, SAS, indicates that the structural surface becomes an antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.2 GHz. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of the SAS was obtained. The experimental results of bending fatigue were compared with single load level fatigue life prediction equations and in good agreement. The SAS concept is can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers.

• 한국표면공학회지
• /
• 제24권4호
• /
• pp.215-221
• /
• 1991

Microstructure evolution during low temperature vapor deposition exhibits wel-developed columnar structure mainly owing to geometrical shadowing effect of surface roughness. It is concluded that this structure is concided with many theoretical models suggested so far. In case of aluminum nitride film deposition consisted of etching and nitriding step employing ECR plasma, the rougher the surface before etching, the finer and more cone-and-whisker structure can be developed. In turn, this fine structure affects the formation and growth of columnar as well as offers many sites available for mechanical lock-up. Conclusively, the formation of well-defined columnar structures depends on the initial surface roughness.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2002

The hot carried degradation in a metal oxide semiconductor device has been one of the most serious concerns for MOS-ULSI. In this paper, three types of LDD(lightly doped drain) structure for suppression of hot carried degradation, such as decreasing of performance due to spacer-induced degradation and increase of series resistance will be investigated. in this study, LDD-nMOSFETs used had three different drain structure, (1) conventional surface type LDD(SL), (2) Buried type LDD(BL), (3) Surface implantation type LDD(SI). As experimental results, the surface implantation the LDD structure showed that improved hot carrier lifetime to comparison with conventional surface and buried type LDD structures.