• 교육녹색환경연구
• /
• 제16권2호
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• 패션비즈니스
• /
• 제16권3호
• /
• pp.13-31
• /
• 2012

The purpose of the study was to analyze the work clothes' clothing comfort and wearer mobility of painting workers with the consideration of the work environment features in the machine and shipbuilding industries in South Korea. A questionnaire survey was conducted for the study, which consisted of questions on the clothing comfort and wearer mobility aspects of painting work clothes by clothes types and body parts. The work clothes' clothing comfort and wearer mobility levels were scaled in 5 points i.e. 1(: very tight/very uncomfortable) to 5(: very slack/very comfortable). The painting work environmental hazardous features were considered as high impact levels of workplace temperature, oxygen deficiency, organic solvent, toxic gas factors while metal fragment factor only impacts 'low' in the painting processes with the findings throughout this study. Since the painting work consisted of surface washing and the spray and touch-up painting processes, which was carried out in an outdoor work place, the painting work clothes should meet high performance of waterproofing from the painting material and air permeability specially in summer as well as thermal performance in winter. The subjects painting workers' assessment of the existing work clothes' clothing oppression was in the levels between 3 (i.e. moderate) and 4 (i.e. comfortable) in a range of 1 to 5 points. The existing painting work clothes' wearer mobility was evaluated 'very uncomfortable' in all work clothes parts, especially, armhole length, biacromial breadth, sleeve length of the jumper; and body rise, waist, hip, thigh and knee circumferences of the pants.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.75-84
• /
• 2021

본 연구에서는 강교량용 일반중방식 도장계열의 신설 도장계 및 재도장계의 내구수명 예측과 도막 열화곡선을 검토하기 위하여 표면처리방법과 도장 종류를 변수로 총 12종류의 도장 시험편에 대하여 실내 부식촉진시험을 실시하였다. 표면처리는 신설(공장도장)과 재도장(현장도장)에 따라 수공구 (SSPC SP-2), 동력공구 (SP-3), 블라스트 처리(SP-10)를 적용하였다. 도장 시험편은 ISO 20340 부식환경 조건에서 실시하였으며, 각 도장계별 열화곡선은 초기결함으로부터 발생된 부풂 및 녹 면적을 기준으로 평가되었다. 또한 대기 부식성 범주와 강재 내구 성능평가 기준을 이용하여 신설 및 보수 도장계의 내구수명을 실험적으로 평가하였다. 그 결과 표면처리 방법에 따른 신설 도장계와 재도장계의 내구수명을 정량적으로 평가하였으며, 대기부식성 등급 C4에서 일반중방식 신설 도장계의 내구수명은 18 ~ 21년, 재도장계는 5.3 ~ 8.0년으로 추정된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.545-550
• /
• 1991

Recently, the use of robots for painting operations has received much attention, as it is a powerful means for automation and quality improvement. Collision-avoidance is a key issue in the path planning for painting operations. In this paper, we develop a computationally efficient algorithm for the generation of collision-free path for two types of motion: a) Gross motion when the robot approaches the painting area, and b) Fine motion while spraying the surface. The former is a typical collision-avoidance problem, but the latter calls for special attention as the painting mechanics has to be incorporated into path planning. The developed algorithm is applied for the internal coating of the car body whose structure is the major source of collision.

• 한국표면공학회지
• /
• 제35권3호
• /
• pp.113-120
• /
• 2002

Injection molded plastic parts have many surface defects. These include a weld line, sink mark, flow mark, gloss, shading, scratching etc. Because these surface faults are not aesthetically acceptable, plastic parts are produced through painting or texturing. The purpose of this paper is to develop paintless molded parts using a flow control method. Computer aided injection mold filling simulations were used in order to minimize the number of defects from injection molding. Based on the numerical results, FR(Flame Retardant) HIPS was developed and the guidelines for part design, mold design, and the processing conditions were established. The effects of cost savings, improvements in productivity, and recycling were considered by reducing the number of surface faults and eliminating the painting process.

• 보존과학회지
• /
• 제27권4호
• /
• pp.451-458
• /
• 2011

이 연구에서는 문헌조사와 광학적 및 과학적 분석조사를 토대로 송산리 6호분 벽화의 제작기법에 대해 고찰하였다. 연구결과, 송산리 6호분의 전축방식은 공적법이 아닌 모르타르를 이용하여 전(塼)을 축조하였고 줄눈(masonry joint) 재료로 석회, 모래 및 석고를 이용하였다. 전돌 표면에는 전체적으로 흑색을 칠한 다음 백색 회(灰)칠을 하였다. 그 위에 벽화제작을 위한 점토 바탕 층을 조성하였는데 수비가 잘된 점토를 흙손 등의 도구를 이용하지 않고 붓으로 바르듯이 완성하였다. 바탕층에 사용된 점토의 재료적 특성은 $30{\mu}m$ 실트질 크기 이하의 광물입자들로 구성되어 있다. 현재까지 고대의 고분벽화에서 사신도의 채색 부위에만 점토 바탕층을 조성하여 제작된 고분벽화는 송산리 6호분이 유일하다. 이 송산리 6호분은 동양을 비롯한 한국의 다른 벽화에서 볼 수 없는 제작기술이라 할 수 있으며 1933년 발굴 당시에 벽화는 이미 심각하게 훼손된 상태였다고 가정하더라도 종합적으로 볼 때 미완의 벽화라고 추정할 수 있다.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.8-15
• /
• 2022

The demand for the re-painting of steel bridges is increasing, but surface treatment is still centered on human resources for on-site re-painting processes. Worker safety accidents continue to occur because the work is performed in a narrow space. Recently, PS balls with excellent surface treatment have been used for blasting, but the working environment is poor due to the large amount of dust generated. In this study, an effective surface treatment method using impeller blasting equipment was developed. The correlation between steel ball size, impeller rotation speed, and exposure time was studied to optimize the efficiency of the surface treatment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2967-2970
• /
• 2007

In a usual painting process, a liquid drop spreads on canvas by being dragged along a paintbrush. To obtain the fundamental understanding of the painting process from the mechanical point of view, we experimentally investigate various dynamic behavior of a liquid drop that spreads between moving solid plates. It is shown that three distinct types of drop spreading take place, i.e. shearing, spreading, and intact dragging, depending on the liquid viscosity and surface tension, the plate speed, and the wettability. We suggest a regime map based on the capillary number and the receding contact angle, which indicates the boundaries between different types of spreading behavior in a dimensionless space.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.