• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.231-254
• /
• 1994

Fracture of cusp, on posterior teeth, especially those carious or restored, is major cause of tooth loss. Inappropriate treatments, such as unnecessarily wide cavity preparations, increase the potential of further trauma and possible fracture of the remaining tooth structures. Fracture potential may be directly related to the stresses exerted upon the tooth during masticatory function. The purpose of this study is to evaluate the fracture resistance of tooth, restored with composite resin inlay. In this study, MOD inlay cavity prepared on maxillary first premolar and restored with composite resin inlay. Three dimensional finite element models with eight nodes isoparametric solid element, developed by serial grinding-photographing technique. These models have various occlusal isthmus and depth of cavity, 1/2, 1/3 and 1/4 of isthmus width and 0.7, 0.85 and 1.0 of depth of cavity. The magnitude of load was 474 N and 172 N as presented to maximal biting force and normal chewing force. These loads applied onto ridges of buccal and lingual cusp. These models analyzed with three dimensional finite element method. The results of this study were as follows : 1. There is no difference of displacement between width of occlusal isthmus and depth of cavity. 2. The stress concentrated at bucco-mesial comer, bucco-disal comer, pulpal line angle and the interface area between internal slopes of cusp and resin inlay. 3. The vector of stress direct to buccal and lingual side from center of cavity, to tooth surface going on to enamel. The magnitude of vector increase from occlusal surface to cervix. 4. The crack of tooth start interface area, between internal slop of buccal cusp and resin inlay. It progresses through buccopulpal line angle to cervix at buccomesial and buccodistal comer. 5. The influence with depth of cavity to fracture of tooth was more than width of isthmus. 6. It would be favorable to make the isthmus width narrower than a third of the intercuspal distance and depth of cavity is below 1 : 0.7.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.247-255
• /
• 2018

In this research, the effect of normal load, sliding velocity, and texture density on thefriction coefficient of surfaces micro-textured on AISI 4140 under paraffin oil lubrication were investigated. The predicted tribological behavior by numerical calculation can be serves as guidance for the designer during the machine development stage. Therefore, in this research friction coefficient prediction model based on response surface methodology (RSM), support vector machine (SVM), and artificial neural network (ANN) were developed. The experimental result shows that the variation of load, speed and texture density were influence the friction coefficient. The RSM, ANN and SVM model was successfully developed based on the experimental data. The ANN model can effectively predict the tribological characteristics of micro-textured AISI 4140 in paraffin oil lubrication condition compare to RSM and SVM.

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.361-372
• /
• 2016

The soil-concrete interface shear strength, although has been extensively studied, is still difficult to predict as a result of the dependence on many factors such as normal stresses, surface roughness, particle sizes, moisture contents, dilation angles of soils, etc. In this study, a well-known rigorous statistical learning approach, namely the least squares support vector machine (LS-SVM) realized in a ubiquitous spreadsheet platform is firstly used in estimating the soil-structure interface shear strength. Instead of studying the complicated mechanism, LS-SVM enables to explore the possible link between the fundamental factors and the interface shear strengths, via a sophisticated statistic approach. As a preliminary investigation, the authors study the expansive soils that are found extensively in most countries. To reduce the complexity, three major influential factors, e.g., initial moisture contents, initial dry densities and normal stresses of soils are taken into account in developing the LS-SVM models for the soil-concrete interface shear strengths. The predicted results by LS-SVM show reasonably good agreement with experimental data from direct shear tests.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.381-386
• /
• 1997

The offsetting method using geometric properties of B-spline control polygon is more faster than using of general normal vector in offset processing. But this method itself does not solve the prob¬lems of loop removal in normal offsetting. Generally the distance between neighborhood spans of B-spline control polygon is greater than the offset distance, the loops are occurred in offsetting. For generating of the more precision tool-path in NC machining, the loops of offset must be removed. In this paper, two methods for loop removal are introduced in offsetting of B-spline curve. One is using the intersection of B-spline control span which being occurred of the loop. The other is using two B-spline curve divisions divided from original B-spline curve or its offset curve. After the inter¬section point of loop was searched, the loop being removed to cusp. Also the method for filleting of cusp is inspected to more precision cutting. It is shown that the offsetting using B-spline control polygon is more effective in the sculptured surface machining.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.283-289
• /
• 2013

Presented in this paper is an adaptive measuring procedure of dental impression using the Structured Light System. While measuring a complex object, such as dental impression, in the reverse engineering, it is not possible to acquire all parts of the scanned surface. Missing scanned data is resulted in holes in a created triangular mesh. The focus of this paper is to introduce an algorithm for automatic identification of additional scanning orientations to fill holes that are created by a default scan. The proposed algorithm was developed by the three major technological requirements: camera visibility, projector visibility, data reliability. In order to satisfy the requirements, the proposed algorithm determines additional scanning orientation from the orientation of a projection plane derived from the average normal vector of boundary triangles.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.1
• /
• pp.159-175
• /
• 2017

We solve the $Bj{\ddot{o}}rling$ problem for constant mean curvature one surfaces in hyperbolic three-space and in de Sitter three-space. That is, we show that for any regular, analytic (and spacelike in the case of de Sitter three-space) curve ${\gamma}$ and an analytic (timelike in the case of de Sitter three-space) unit vector field N along and orthogonal to ${\gamma}$, there exists a unique (spacelike in the case of de Sitter three-space) surface of constant mean curvature 1 which contains ${\gamma}$ and the unit normal of which on ${\gamma}$ is N. Some of the consequences are the planar reflection principles, and a classification of rotationally invariant CMC 1 surfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.7-10
• /
• 2001

We have developed a prototype dedicated CAM system for machining a human bust that is not a relief. The input is STL file format, and the output is NC-codes for machining on a 3-axis general purpose CNC milling machine with an index table attached. Main modules are STL import, STL transformation, modeling jig/fixture, master model generation, and calculation of machining area. System architecture is proposed and main modules are briefly described. We adopted the angle between tool-axis and the surface normal vector to calculate machining area, and tested at several degrees.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.1
• /
• pp.60-68
• /
• 1999

In reverse engineering (RE) sustems, the quality of the data aquisition process is crucial to the accuracy of the reverse engineered three dimensional computer-aided design (CAD) model. However, these tasks are predominantly done manually, and little work has been done to improve the efficiency of scanning by determining the minimum number of scans and the optimal scanning directions. In this paper, new scanning and registration methods using tooling balls are developed to assist in determining the optimal parameter for these processes. When the object to scanned has no concavity, attaching path of the object and its bounding rectangle are used for optimal scanning and registration. Then minimum number of tooling balls and their positions are calculated automatically. In the case of concave parts, the scanning plan should include a complete scan of the concave area. With the surface normal vector and the scanning direction, the minimum degree of rotating the part can be calculated. But the maximum rotation should be restricted in order to prevent occlusion of the part. Finally tow sample part ar scanned based on the proposed methods and the results are discussed.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.227-230
• /
• 2002

In this paper we concentrate on overall direction of the gaze based on a head pose for human computer interaction. To decide a gaze direction of user in a image, it is important to pick up facial feature exactly. For this, we binarize the input image and search two eyes and the mouth through the similarity of each block ( aspect ratio, size, and average gray value ) and geometric information of face at the binarized image. We create a imaginary plane on the line made by features of the real face and the pin hole of the camera to decide the head orientation. We call it the virtual facial plane. The position of a virtual facial plane is estimated through projected facial feature on the image plane. We find a gaze direction using the surface normal vector of the virtual facial plane. This study using popular PC camera will contribute practical usage of gaze tracking technology.

• Architectural research
• /
• v.18 no.2
• /
• pp.65-74
• /
• 2016

Free vibration analysis of plates and shells is carried out by using isogeometric approach. For this purpose, an isogeometric shell element based on Reissner-Mindlin (RM) shell theory is developed. Non-uniform rational B-spline surface (NURBS) definition is introduced to represent the geometry of shell and it is also used to derive all terms required in the isogeometric element formulation. New anchor positions are proposed to calculate the shell normal vector. Gauss integration rule is used for the formation of stiffness and mass matrices. The proposed shell element is then used to examine vibrational behaviours of plate and shell structures. From numerical results, it is found to be that reliable natural frequencies and associated mode shapes can be predicted by the present isogeometric RM shell element.