• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제10권1호
• /
• pp.31-45
• /
• 2006

최근 고집적화, 고밀도화 되어가는 첨단 디바이스와 섬세한 공정들은 SMT(surface mounting technology)에서의 더욱 까다로운 검사 항목들을 요구하고 있다. 특히, 어셈블리 생산품의 불량의 60% 이상을 차지하는 솔더 프린팅의 검사는 이러한 추세에 대응책으로 3차원적인 검사방식이 기존의 2차원적인 검사방식을 빠르게 대치해나가고 있다. 따라서 본 논문에서는 SMT 어셈블리 라인에서 PCB(Printed circuit board)에 프린팅된 솔더 페이스트에 대한 3차원적인 검사를 자동으로 수행하는 인라인형의 고속 3차원 검사 장비 및 측정 알고리즘을 제안한다. 제안한 방법은 3차원 데이터를 B-스플라인으로 표면을 구성한 다음 이를 기반으로 패드를 추출하고, 검사하는 알고리즘이다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 정기총회 및 추계학술대회
• /
• pp.29-41
• /
• 2007

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.31-35
• /
• 2009

In the silicon wafer polishing process, the mounting stage of silicon wafer on the ceramic carrier block has been using the polishing template which utilizes the porous surface instead of traditional wax mounting method. Here in this article, the experimental study is carried out in order to study the wafer demounting by water jet and the effects of operating conditions such as the water jet flowrate and the number of water jet nozzles on the wafer demounting time. It is found that the measured wafer demounting time is inversely proportional to the water flowrate per nozzle, regardless of number of nozzles used; implying that the stagnation pressure by the water jet impingement is the dominant key factor. Additionally, by using the transparent disk instead of wafer, the air bubble formation and growth is observed under the disk, making the passage of water flow, and subsequently demounting the wafer from the porous pad.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4138-4146
• /
• 2011

표면실장기술(SMT: Surface Mount Technology)에 있어서 휴대폰 및 평판 디스플레이가 점점 가볍고 얇아지면서 이 제품에 사용되는 전자부품이 작아지고 있어, 0402, 0603 Chip등과 같은 SMD(Surface Mount Device) 부품을 실장하는 기술이 대두되고 있다. 따라서 Chip Mounter 제조회사들은 미삽이나 오삽을 방지하기 위한 실장기술에 대해 지속적인 연구를 해오고 있다. 본 연구는 이러한 미삽 오삽 방지를 실현하기 위하여 Fiber sensor를 이용하여 기계적 구조를 마련하고, 이를 활용한 시스템 알고리즘을 개선하는 기술을 제시한다.

• 기술사
• /
• 제26권3호
• /
• pp.51-55
• /
• 1993

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.750-750
• /
• 1994

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.67-75
• /
• 2020

This paper proposes a methodology for gantry route optimization in order to maximize the productivity of a odd-type surface mount device (SMD). A odd-type SMD is a machine that uses a gantry to mount electronic components on the placement point of a printed circuit board (PCB). The gantry needs a nozzle to move its electronic components. There is a suitability between the nozzle and the electronic component, and the mounting speed varies depending on the suitability. When it is difficult for the nozzle to adsorb electronic components, nozzle exchange is performed, and nozzle exchange takes a certain amount of time. The gantry route optimization problem is divided into the mounting order on PCB and the allocation of nozzles and electronic components to the gantry. Nozzle and electronic component allocation minimized the time incurred by nozzle exchange and nozzle-to-electronic component compatibility by using an mixed integer programming method. Sequence of mounting points on PCB minimizes travel time by using the branch-and-price method. Experimental data was made by randomly picking the location of the mounting point on a PCB of 800mm in width and 800mm in length. The number of mounting points is divided into 25, 50, 75, and 100, and experiments are conducted according to the number of types of electronic components, number of nozzle types, and suitability between nozzles and electronic components, respectively. Because the experimental data are random, the calculation time is not constant, but it is confirmed that the gantry route is found within a reasonable time.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.79-92
• /
• 1994

Surface mount technology has been evolving in the electronics industries. Efficient operation of surface mounters is closely related with the productivity of the electronic products. In this study, modeling and optimal algorithm for allocating feeders and sequencing mounting jobs in the rotary type surface mounter, which consider all the constraints, in the hardware and are easy to be used in the field, are developed.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.43-50
• /
• 1998

The purpose of the paper is to protect the damage of plastic IC package with searching the cause of the fracture due to the delamination and crack when the encapsulant of plastic IC package is on viscoelastic behavior with the effect of creep on high temperature, The model for analysis is the plastic SOJ package with dimpled diepad in the IR soldering process of surface mounting technology. The risk of delamination with calculating the distribution of viscoelastic thermal stress in the package without the crack in the surface mounting process is checked. The package model with the perfect delamination between chip and diepad is chosen to estimate the resistance against fracture in thermal loading with calculating C (t)-integrals according to the change of the design. The optimum design to depress the delamination and crack is presented.

• 천문학회보
• /
• 제43권2호
• /
• pp.55.4-56
• /
• 2018

Linear Astigmatism Free - Three Mirror System (LAF-TMS) is the linear astigmatism free off-axis wide field telescope with D = 150 mm, F/3.3, and $FOV=5.51^{\circ}{\times}4.13^{\circ}$. We report the design and analysis results of its mirrors and optomechanical structures. Tolerance allowance has been analyzed to the minimum mechanical tolerance of ${\pm}0.05mm$ that is reasonable tolerance for fabrication and optical alignment. The aluminum mirrors are designed with mounting flexure features for the strain-free mounting. From Finite Element Analysis (FEA) results of mounting torque and self-weight, we expect 33 - 80 nm RMS mirror surface deformations. Shims and the L-bracket are mounted between mirrors and the mirror mount for optical alignment. The mirror mount is designed with four light-weighted mechanical parts. It can stably and accurately fix mirrors, and it also suppresses some of stray light.