• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.899-909
• /
• 2023

In this study, the material scientific characteristics of Hobun pigments used as white inorganic pigment for traditional cultural heritage were identified according to the type of shell and calcination and evaluated the stability of the preservation environment. For the purpose of this, we collected 2 different types of Hobun pigments made by oyster and clam shell and its calcined products(at 1,150℃). Hobun pigments before calcined identified calcium carbonate such as calcite, aragonite but calcination derived changing main composition to portlandite and calcite. Results of FE-SEM showed characteristics microstructure for each shell but pigments after calcined observed porous structure. Porous granule highly caused oil adsorption according to increase specific surface area of pigments. In addition, the whiteness improved after calcined pigments compared to non-calcined pigments, and the color improvement rate of Hobun pigment (CS) which made of clam shell was higher. As a result of the accelerated weathering test, the Hobun pigment-colored specimen had a color difference value of less than 2 after the test, which was difficult to recognize with the naked eye. In particular, the color stability has improved as the color difference value of the Hobun pigment is smaller after calcined compared to before non-calcined pigment. However, it was confirmed that the stability of the painting layer was lower in the specimen after calcined pigment. For antifungal activity test, Aspergillus niger, Tyromyces palustris and Trametes versicolor were used as test fungi, and all pigments were found to have preventive and protective effects against fungi. Especially, the antifungal effect of the calcined pigment was excellent, which is due to the stronger basicity of the pigment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.8-20
• /
• 2023

Although the landscape architectural facilities need to be repaired according to historical and authentic techniques, the repair criteria of the standard specification for repairing cultural heritages still remain at a theoretical level, and there are little research analyzing detailed techniques from specific cases. This study discussed the repair techniques based on historical facts, around terraced flower beds, ponds, waterways and pavement in the government-managed spaces in the Joseon Dynasty. It analyzed the materials and finish of stone wall elements, the structural reinforcement and backfill materials, and topsoil surface protection measures, and drew out stones for foundation reinforcement, plastering material for agglutination, and stone processing techniques for the terraced flower beds. It examined the materials and structures of the rock revetment, foundation reinforcement and waterproofing techniques and drew out the outstanding characteristics of the foundation work, the recycle of used elements and the management of water quality, for the ponds. It primarily investigated the materials, foundation reinforcement and waterproofing techniques and discovered the repair techniques such as cover stone finishing methods, foundation and backfill materials, and flow reduction methods, for the waterways. Finally, it provided actual cases of the foundation composition, auxiliary materials and tools, and the use of cyperaceae and highlighted the existence of professional craftsmen called Bangjeonjang(方磚匠), for the pavement. This study is expected to be a staring point for discovering the repair techniques for landscape architectural facilities and used as basic data for revising specifications in the future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.

• Clean Technology
• /
• v.30 no.1
• /
• pp.47-54
• /
• 2024

Jatropha oil extracted from the seeds of Nepalese Jatropha curcas, a non-edible crop, was used as a raw material and converted to biodiesel through a two-step process consisting of an esterification reaction and a transesterification reaction. Amberlyst-15 catalyst was applied to the esterification reaction between the free fatty acids contained in the Jatropha oil and methanol. The acid value of the Jatropha oil could be lowered from 11.0 to 0.26 mgKOH/g through esterification. Biodiesel was synthesized through a transesterification reaction between Jatropha oil with an acid value of 0.26 mgKOH/g and methanol over NaOH/γ-Al₂O₃ catalysts. As the loading amount of NaOH increased from 3 to 25 wt%, the specific surface area decreased from 129 to 28 m²/g and the pore volume decreased from 0.249 to 0.129 cm³/g. The amount and intensity of base sites over the NaOH/γ-Al₂O₃ catalysts increased simultaneously with the NaOH loading amount. It was confirmed that the optimal NaOH loading amount for the NaOH/γ-Al₂O₃ catalyst was 12 wt%. The optimal temperature for the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst was selected to be 65 ℃. In the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst, the reaction rate was affected by external diffusion limitation when the stirring speed was below 150 RPM, however the external diffusion limitation was negligible at higher stirring speeds.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.3
• /
• pp.90-101
• /
• 2024

The test answer sheets submitted by examinees in the Joseon Dynasty were called Sigwon (test papers with answers, 試卷), and Siji (blank test papers, 試紙) were generally prepared by the examinees themselves. At that time, paper was not produced as a standard product, so there was no uniformity in size or manufacturing method. Mulberry paper in the Joseon Dynasty was basically transparent, so various paper processing methods were applied for examinees to write answers on both sides. In order for ink lines to be written smoothly, Dochim (hitting paper with a wooden bat on the stone, 搗砧) or surface processing was treated. We found a 19th-century Siji (試紙) that was processed in a unique way, which led to this study. An unusual Sigwon (試卷) is one by Lee Mangi (李晩耆) from 1848 owned by the National Folk Museum of Korea. We found that an opaque white substance was thickly applied between the papers of this Siji (試紙). Through component analysis using infrared spectrophotometry, fluorescence X-ray spectroscopy, optical and polarizing microscopy, and electron microscopy, this white substance was proved to be rice starch. From these analyses, it is presumed that this Siji (試紙) was made by soaking rice flour in water to remove a significant amount of protein, and then applying wet starch containing a small amount of protein between sheets of paper. In addition, with a Siji (試紙) reproduction experiment, we found that the paper reproduced by this processing method was thick and high in whiteness and opacity. This is believed to be a production method designed to produce double-sided paper without using multiple sheets of paper, which was difficult to obtain at that time. In this study, the material processed between the sheets of paper was disclosed only from < Lee Mangi (李晩耆)'s Sigwon (試卷)(Minsok 71745)>, but this appears to be one of several processing methods to treat the paper during the Joseon Dynasty. We hope that more similar Sigwons will be discovered in the future and that extensive research on processing methods will be conducted.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.25-39
• /
• 1971

Recently successful induction of haploid plant by means of anther culture method has become a big topic among geneticists and plant breeders. The haploid plant can be used as a precious material for such basic researches as mutation or genetics. Once the haploid is obtained, production of homozygous plant is not a difficult problem. The method of producing homozygous plant can, also, be applied to the practical breeding works. When applied to the hybridization of self-fertilizing breeding period would be greatly shortened and in cross-fertilizing vegetables production of uniform hybrid seed would be very easily obtained. Last few years many scientists attempted anther cultures using various plant species, but it was successful only in several species. Unlike the other tissue cultures which use somatic organs or tissues as explants, anther culture seems to be very difficult because the plants or calli have to be induced from the haploid microspores or pollen grains. In the present experiment anther culture of fruit trees and ornamental shrubs of four genera and seven species was attemped. Anthers of Various stages ranging from tetrad and late microspore were cultured on the modified Murashige and Skoog's medium supplemented with various concentrations of auxins and kinetin as growth regulators. Handling of materials, sterilization, and other operations of culture were done by routine methods. The results were summarized as follows: 1. Calli were induced in the anthers of Forsythia Koreana Nak., Rhododendron mucronuratum Turcz., R. yedoense Max. var. Poukhanense Nak., and Prunus armeniaca L. var. ansu Max. No signs of callus were observed in Prunus persica Sieb. et Zucc. var. vurgaris Max., Pyrus ussuriensis var. macrostipes (Nak.), and Prunus salcina Lindley. 2. Calli were easily formed in any of the media with differing concentrations of auxins and kinetin. 3. In F. Koreana calli developed from anther surface and connective. Callus emerging out of anther locule was not observed. 4. Somatic calli arose from filament, connective, and inside of anther wall in R. mucronulatum. Many of the microspores accumulated starch grains. 5. The anther lobes located opposite the filament of R. yedoense turned easily to calli. This phenomenon was not observed in R. mucronulatum. Microspore embedded for a period in the medium became starch pollen. No callus was observed arising from microspore. 6. In P. armeniaca calli were not induced from somatic anther tissues. Instead, callus emerged out of anther locule rupturing the anther slit. Starch was not formed in the microspore. 7. In P. persica, Pyrus ussuriensis, and P. salcina, calli were not observed in the anthers examined more than 60 days after culture. Microspores of these species, however, were free of starch grains even after long period of subculture. 8. It was learned that somatic calli of the species examined arose usually from endothelium of anther wall, septum of two neighboring anther locules, parenchyma tissues of connectives, or anther lobes. 9. In the anther locule of P. armeniaca cultured long in medium, swollen microspores, polynucleate microspores, multicellular pollen grains, or callus mass were frequently observed, this indicating that the callus of this species was microspore-origin. 10. It was clarified that in P. armeniaca production of haploid plant by anther culture might be possible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1837-1847
• /
• 2008

The goal of this study is to express the image of chameleons-that change their colors by light, temperature and its mood-into the sexy styles of corresponding coquettish temperamental people in Wearable Art. The method used in this study was experimenting various production mediums, including creating the textured stretch fabric, in the process of expressing the conceptual characteristics of the chameleon in Wearable Art. The concept of the work was a concoction of 'tempting', 'splendid', 'brilliant', 'fascinating', etc. that highlighted the real disposition of the chameleon. The futuristic preference of the researcher was also implicated. "Comfortable" and "enjoyable" concepts via motions were improved with the its completeness. The point of the design and production is to express symbolically the chameleon in real life, analyzing its sleek body lines, conditional colors changing, outer skins and the cubic textures. The coquettish temperamental image, the conceptual image of the chameleon, was also expressed by implication into the whole work. The entire line of this work is body-conscious silhouette. It was symbolically selected to image the outline of the chameleon that has the slim and sleek body. The exposed back is intended to express symbolically the projected back bones of the chameleon. The hood of gentle triangle line expresses the smooth-lined head part. The irregular hemlines represent the elongated chameleon's tale. The chameleon with its colors of vivid tones is characterized the colors changing by its conditions. This point was importantly treated in the working process by trying the effects that the colors are seen slightly different according to the light and angles. The material was given the effect that its surface colors are seen different in lights and angles because of the wrinkles protruded lumpy-bumpy. The various stones of red and blue tones are very similar to the skin tones of the real chameleon, and their gradation makes the effect that the colors are visibly changed with each move. The textures of the chameleon were produced via the wrinkle effect of smoke-shape, which is the result of using the elastic threads on the basic mediums stitched with 50/50 chiffon and polyester along with velvet dot patterns. The stretching fabric by the impact of the elastic threads is as much suitable for making the body-conscious line. The stones are composed of acrylic cabochon and gemstone. They are symbolically expressed the lumpy and bumpy back skin of the chameleon and produced the effect of the colors visibly different. The primary technique used in this dress is the draping utilizing the biased grains. The front body piece is connected to the hood and joined to the back piece without any seam. For the irregular hemline flares, leaving the several rectangular pieces with bias grains, they were connected by interlocking. What defines the clothes is the person in action. Therefore, what decides the completeness of clothes might be its comfortable and enjoyable feeling by living and acting people. The chameleon dress could also reach its goal of comforting and pleasing Wearable Art in the process of studying the techniques and effects that visibly differentiate the colors. It is considered as a main point of the Wearable Art, which is a comfortable enjoyable clothing tempered with the artistic beauty.

• Journal of Chest Surgery
• /
• v.42 no.4
• /
• pp.473-479
• /
• 2009

Background: Retrograde autologous priming (RAP) is known to be useful in decreasing the need of transfusions in cardiac surgery because it prevents excessive hemodilution due to the crystalloid priming of cardiopulmonary bypass circuit. However, there are also negative side effects in terms of blood conservation. We analyzed the intraoperative blood-conserving effect of RAP and also investigated the efficacy of autotransfusion and ultrafiltration as a supplemental method for RAP. Material and Method: From January 2005 to December 2007, 117 patients who underwent isolated coronary artery bypass operations using cardiopulmonary bypass (CPB) were enrolled. Mean age was 63.9$\pm$9.1 years (range 36$\sim$83 years) and 34 patients were female. There were 62 patients in the RAP group and 55 patients in he control group. Intraoperative autotransfusion was performed via the arterial line. RAP was done just before initiating CPB using retrograde drainage of the crystalloid priming solution. Both conventional (CUF) and modified (MUF) ultrafiltrations were done during and after CPB, respectively. The transfusion threshold was less than 20% in hematocrit. Result: Autotransfusions were done in 79 patients (67.5%) and the average amount was 142.5$\pm$65.4 mL (range 30$\sim$320 mL). Homologous red blood cell (RBC) transfusion was done in 47 patients (40.2%) and mean amount of transfused RBC was 404.3$\pm$222.6 mL. Risk factors for transfusions were body surface area (OR 0.01, 95% CI 0.00 $\sim$ 0.63, p=0.030) and cardiopulmonary bypass time (OR 1.04, 95% CI 1.01 $\sim$ 1.08, p=0.019). RAP was not effective in terms of the rate of transfusion (34.5% vs 45.2%, p=0.24). However, the amount of transfused RBC was significantly decreased (526.3$\pm$242.3ml vs 321.4$\pm$166.3 mL, p=0.001). Autotransfusion and ultrafiltration revealed additive and cumulative effects decreasing transfusion amount (one; 600.0$\pm$231.0 mL, two; 533.3$\pm$264.6 mL, three; 346.7$\pm$176.7 mL, four; 300.0$\pm$146.1 mL, p=0.002). Conclusion: Even though RAP did not appear to be effective in terms of the number of patients receiving intraoperative RBC transfusions, it could conserve blood in terms of the amount transfused and with the additive effects of autotransfusion and ultrafiltration. If we want to maximize the blood conserving effect of RAP, more aggressive control will be necessary - such as high threshold of transfusion trigger or strict regulation of crystalloid infusion, and so forth.