• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.503-515
• /
• 2022

The permeability coefficient is an essential parameter for the study of seepage flow in fractured rock mass. This paper discusses the feasibility and application value of using readily available RQD (rock quality index) data to estimate mine water inflow and grouting quantity. Firstly, the influence of different fracture frequencies on permeability in a unit area was explored by combining numerical simulation and experiment, and the relationship between fracture frequencies and pressure and flow velocity at the monitoring point in fractured rock mass was obtained. Then, the stochastic function generation program was used to establish the flow analysis model in fractured rock mass to explore the relationship between flow velocity, pressure and analyze the universal law between fracture frequency and permeability. The concepts of fracture width and connectivity are introduced to modify the permeability calculation formula and grouting formula. Finally, based on the on-site grouting water control example, the rock mass quality index is used to estimate the mine water inflow and the grouting quantity. The results show that it is feasible to estimate the fracture frequency and then calculate the permeability coefficient by RQD. The relationship between fracture frequency and RQD is in accordance with exponential function, and the relationship between structure surface frequency and permeability is also in accordance with exponential function. The calculation results are in good agreement with the field monitoring results, which verifies the rationality of the calculation method. The relationship between the rock mass RQD index and the rock mass permeability established in this paper can be used to invert the mechanical parameters of the rock mass or to judge the permeability and safety of the rock mass by using the mechanical parameters of the rock mass, which is of great significance to the prediction of mine water inflow and the safety evaluation of water inrush disaster management.

• 한국재료학회지
• /
• 제33권1호
• /
• pp.21-28
• /
• 2023

The electromembrane process, which has advantages such as scalability, sustainability, and eco-friendliness, is used in renewable energy fields such as fuel cells and reverse electrodialysis power generation. Most of the research to visualize the internal flow in the electromembrane process has mainly been conducted on heterogeneous ion exchange membranes, because of the non-uniform swelling characteristics of the homogeneous membrane. In this study, we successfully visualize the electro-convective vortices near the Nafion homogeneous membrane in PDMS-based microfluidic devices. To reinforce the mechanical rigidity and minimize the non-uniform swelling characteristics of the homogeneous membrane, a newly developed swelling supporter was additionally adapted to the Nafion membrane. Thus, a clear image of electroconvective vortices near the Nafion membrane could be obtained and visualized. As a result, we observed that the heterogeneous membrane has relatively stronger electroconvective vortices compared to the Nafion homogeneous membranes. Regarding electrical response, the Nafion membrane has a higher limiting current and less overlimiting current compared to the heterogeneous membrane. Based on our visualization, it is assumed that the heterogeneous membrane has more activated electroconvective vortices, which lower electrical resistance in the overlimiting current regime. We anticipate that this work can contribute to the fundamental understanding of the ion transport characteristics depending on the homogeneity of ion exchange membranes.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.707-716
• /
• 2023

The influence of waste technological waters of thermal and fast reactors of Beloyarsk NPP (Russia) on the accumulation of ⁶⁰Co, ⁹⁰Sr and ¹³⁷Cs in macrophytes and ichthyofauna of the cooling pond has been studied. Critical radionuclides, routes of their entry into the ecosystem and periods of maximum discharge of radioisotopes into the cooling pond have been determined. It is shown that the technology of electricity generation at the Beloyarsk NPP, based on fast reactors, has a much smaller effect on the release of artificial radionuclides into the environment. Therefore, during the entire period of monitoring studies (1976-2019), the decrease in the specific activity of radionuclides of NPP origin in macrophytes was 13-25800 times, in ichthyofauna 1.5-44.5 times. The maximum discharge of artificial radionuclides into the Beloyarsk reservoir was noted during the period of restoration and decontamination work aimed at eliminating the emergencies at the AMB reactors of NPP. The factors influencing the accumulation of artificial radionuclides in the components of the freshwater ecosystem of the Beloyarsk cooling pond have been determined, including: the physicochemical nature of radioisotopes, their concentration in surface water, the temperature of the aquatic environment, the trophicity of the reservoir, the species of hydrobionts.

• 사물인터넷융복합논문지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2022

본 연구의 개발대상 제품은 선박 및 발전용 EGB(Exhaust Gas Boiler-폐열보일러) 종류로써 디젤 엔진, 가스 엔진, 가스 터빈 등에서 나오는 배기 가스의 여열을 이용하여 물을 가열하여 고온·고압의 증기나 온수를 발생시키는 열회수 장치이다. 발생된 증기나 온수는 선박의 선실 난방 및 온수 시설이나 HFO Heating, 터빈 구동에 필요한 동력원으로 사용된다. 폐열보일러의 원리는 여열을 가진 고온의 배기 가스가 보일러의 Tube를 통과하면서 물을 데우는 역할을 한다. 데워진 물은 스팀 형태로 선실이나 터빈장치로 보내어져 사용하게 되는 구조이다. 본 연구에서는 EGB의 열전달 부품인 관형 튜브를 Plate Tube로 대체하여 열전달 표면을 늘려 효율을 극대화하는데 목표가 있다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2256-2262
• /
• 2023

The electrochemical corrosion behaviors of SA106 Grade B (SA106B) carbon steel in H₂SO₄4-N₂H₄ and H₂SO₄-N₂H₄-CuSO₄ solutions at 95 ℃ have been investigated with the addition of commercial corrosion inhibitors (CI#30 and No. 570S), to determine the stability of SA106B in the hydrazine-based reductive metal ion decontamination (HyBRID) process. The potentiodynamic polarization experiment revealed that the corrosion inhibitors were capable of lowering the corrosion rate of SA106B in H₂SO₄-N₂H₄ solution. It was found that the corrosion inhibitors induced formation of fixed surface layer on the carbon steel upon the corrosion. This corrosion inhibition performance was reduced in the presence of CuSO₄ in the solution owing to the chemical reactions between organic compounds in the corrosion inhibitors and CuSO₄. CI#30 showed a better corrosion inhibition effect in the H₂SO₄-N₂H₄-CuSO₄ solution. Although the corrosion inhibitors can provide better stability to SA106B in the HyBRID solution, their application should be carefully considered because it may result in reduced decontamination performance and increased secondary waste generation.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.332-340
• /
• 2023

Crystalline silicon solar cells have attracted great attention for their various advantages, such as the availability of raw materials, high-efficiency potential, and well-established processing sequence. Tunnel oxide passivated contact (TOPCon) solar cells are widely regarded as one of the most prospective candidates for the next generation of high-performance solar cells because an efficiency of 26% has been achieved in small-area solar cells. Compared to n-type TOPCon solar cells, the photo conversion efficiency (PCE) of p-type TOPCon is slightly higher. The highest PCEs of p-type TOPCon and n-type TOPCon solar cells are 26.0% and 25.8%, respectively. Despite the highest efficiency in small-area cells, limited progress has been achieved in p-type TOPCon solar cells for large are due to their lower carrier lifetime and inferior surface passivation with the boron-doped c-Si wafer. Nevertheless, it is of great importance to promoting the p-type TOPCon technology due to its lower price and well-established manufacturing procedures with slight modifications in the PERC solar cells production lines. The progress in different approaches to increase the efficiencies of p-type TOPCon solar cells has been reported in this review article and is expected to set valuable strategies to promote the passivation technology of p-type TOPCon, which could further increase the efficiency of TOPCon solar cells.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.9-14
• /
• 2023

In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.26-37
• /
• 2023

도시 교통 혼잡과 환경 문제에 대한 대안으로 차세대 비행체 Urban Air Mobility(UAM) 항공기 개발이 주목받고 있다. 이를 위해, UAM 항공기가 수직이착륙할 수 있는 플랫폼인 버티포트(Vertiport) 역시 논의되고 있다. 버티포트로 인한 지면 효과는 UAM 항공기의 공력과 소음 특성에 직접적인 영향을 미친다. UAM 항공기는 인구가 밀집된 도심에서 운용되므로 엄격한 소음 규제가 예상되므로, 설계단계에서 공기역학적 현상과 공력 소음의 정밀한 예측이 요구된다. 본 연구에서는 Lattice-Boltzmann Method(LBM) 시뮬레이션과 투과면 기반의 Ffowcs Williams and Hawkings(FW-H) 음향상사법을 이용하여 지면 효과에 대한 공력, 유동장, 원거리 소음 방사 특성을 분석하였다.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.481-488
• /
• 2006

본 연구는 준분포형 장기유출모형인 SWAT과 3차원 분포형 지하수 모형인 MODFLOW를 통합한 새로운 시도에 관한 것이다. SWAT모형은 준분포형 특성상 지하수 성분중에서 투수계수나 저류계수등의 분포형 매개변수를 고려할 수 없으며 지하수 함양량, 수두와 양수량 분포 등을 고려하는데에도 어려움이 있다. 이와같은 문제점을 극복하기 위해 SWAT의 수문반응단위인 HRU와 MODFLOW의 기본단위인 셀간의 특성치들을 주고받을 수 있는 완전연동형 기법을 제시하였다. 이러한 결합은 하천망과 대수층간의 상호작용을 경계흐름으로 고려함으로써 완성되었다. SWAT-MODFLOW 결합모형을 우리나라 경안천 수위관측소 유역에 시험적으로 적용한 결과, 포화대와 하천지류간의 상호작용이 경안천 유역의 유출량 산정에 중요한 역할을 한다는 것을 알 수 있었다. 이와 함께 결합모형은 지하수두 및 함양량의 시공간적 변동성을 재현하는 등 광범위한 적용가능성을 보여주었다.

• 한국동물학회지
• /
• 제12권1호
• /
• pp.29-33
• /
• 1969

忠南 禮山郡 禮山邑, 新陽面, 大興面의 3地區에서 1964年 4月부터 1968年 12月까지 調査한 結果 Megarhyssa jezoensis가 호도나무의 害蟲인 Sirex nitobei에 寄生함을 알았고 그 生活史는 다음과 같았다. 1. 越冬後 成蟲出現은 4月下旬부터 5月中旬까지이며 最盛期는 5月 5日이였고, 一化基成蟲은 7月上旬에서 7月中旬 사이에 出現했고 最盛期는 7月 10日 이였으며 二化基成蟲은 9月下旬부터 10月下旬까지에 出現했고 最盛期는 10月 8日 이였다. 2. 幼蟲發育은 一化基가 5月上旬부터 6月下旬까지 二化基가 7月中旬부터 9月上旬까지, 三化基는 10月上旬부터 이루어졌다. 3. 　期는 6月下旬부터 7月中旬까지이고 二化基는 8月下旬부터 9月中旬까지이다. 4, 成蟲은 호도나무 줄기속 Sirex nitobei의 成蟲에 産卵하고 孵化幼蟲은 Sirex nitobei의 幼蟲을 파먹고 成長　化한다. 　態로 越冬하되 이른 것은 早春에 成蟲으로 되어 호도나무 줄기속에 머물러 있다.