본 연구는 돈분뇨의 환경친화적인 생물전환 기술을 통해 자원화 가능성을 보았다. 돈분뇨는 높은 유기물 함량 때문에 자연계로 배출되었을 때 여러 환경적 문제를 초래할 수 있다. 따라서 이를 적절하게 처리함과 동시에 자원화 효과를 볼 수 있는 균사체 생물전환 기술 개발이 필요하다. 본 연구를 통해 돈분뇨의 균사체 생장의 생물배지로써 활용가능성을 보았고 통계 수학적 방법론을 접목시켜 생장 최적점 도출 통해 생물전환 효율을 높이는 연구가 수행되었다. 돈분뇨를 생물배지로 활용해 상황버섯 균사체의 고체배양 실험을 수행하였다. 독립변수로는 돈분뇨 농도, pH, 온도를 선정하였고 종속변수는 상황버섯 균사체 길이 생장으로 선정했다. 중심점 합성법을 통해 경험적 모델의 정확도를 높이며 각 독립변수와 종속변수 사이의 상관관계를 수치화하여 표현했다. 각 독립변수의 1차, 2차, 그리고 interaction 영향을 살펴보았다. 통계수학적 방법론을 통해 상황버섯 균사체의 최대 길이 생장을 찾았고 이는 돈분뇨 농도 5.0 g/l, pH 5.0, 온도 $29.7^{\circ}C$에서 2.78mm/hr 이라는 최대 길이 생장을 보였다. 본 연구의 결과를 통해 돈분뇨의 생물배지 활용 가능성이 입증되었고 고부가가치인 상황버섯 균사체로의 생물전환의 효율 향상에 도움을 줄 수 있는 연구 결과가 도출되었다.
한반도 남부 지각 속도구조를 밝히기 위해서, 서북서-동남동 방향의 2002년도 측선 294 km와 북북서-남남동 방향의 2004년도 측선 335 km를 따라 인공적으로 발생시킨 지진파 자료를 각각 120초와 150초 기록하였다. 초동주시 역산과정을 통하여 속도단면을 작성하였으며, 역산 시 초기모델은 측선 주변의 고정관측소에서 기록한 원거리 지진자료의 수신함수역산으로 구한 1차원 속도구조자료를 활용하였다. 파선경로는 2.0 km와 7.1 km 깊이에 속도 6.0 km/s와 7.1 km/s를 갖는 굴절면이 존재하며, 굴절파 속도 $7.8{\sim}8.1\;km/s$의 모호면은 $30.8{\sim}36.1\;km$ 깊이에 존재함을 보인다. 속도단면은 옥천계 하부 $6{\sim}7\;km$ 깊이에 상당한 규모의 저속도층이 15 km 깊이의 속도 불연속면 상부에 존재하며, 영동단층은 10 km 이상 깊이까지 연장되어 있고, 최대 4.2 km 정도두께를 갖는 경상분지 하부에 고속도층이 얕게 분포하는 것으로 분석된다.
치콘 및 엽채류의 저장기간 연장을 위해 천연보존제 및 천연항균제 선정을 위한 항균실험을 실시하고 후박 추출물이 미생물 최소 저해 농도 및 집락 형성 저해능이 높음을 확인하였다. 이를 엽채류에 도포함으로써 이들의 저장기간을 연장시키고자 수용성 추출물의 활용성을 극대화 할 수 있는 식용 나노입자를 제조하고 전자현미경 관찰 및 image anlyzer 측정을 통해 후박 추출물 나노입자의 80% 이상이 300nm 이하 크기로 형성되었음을 확인하였다. 투과전자현미경을 이용한 관찰을 통해서도 수십 nm $\sim$ 약 500nm 범위의 유사 구형 나노입자임을 확인하였으며, 엽채류 저장기간 연장 효과를 알아보고자 이 나노입자를 치콘 표면에 분무 도포하였다. 전자현미경을 통한 치콘 표면 촬영으로 도포된 후박 추출물 나노입자가 표면에 잔류하고 있음을 확인하였으며, HPLC 분석을 통해 후박 추출물을 서서히 방출하고 있음을 확인하였다. 나노입자를 도포한 치콘과 무처리 대조군의 저장기간에 따른 에틸렌 발생량을 GC로 측정한 결과, 입자를 도포한 치콘에서 초기 에틸렌 발생량이 높으나 저장기간에 따른 에틸렌 생성량의 증가를 억제해 7일 이후에는 발생량 자체도 적어졌음을 확인할 수 있었다. 이는 후박 추출물의 나노입자가 치콘의 세포호흡을 효과적으로 억제하는 것을 확인한 것으로 나노입자의 처리를 통해 저장기간의 연장효과를 나타내었다.
Objective: The objective of this research is to quantitatively analyze muscle activities of arm and shoulder, according to direction in various types of one-handed manual material handling, based on surface electromyography. Background: Workers in industrial sites frequently carry out one-handed manual material handling using arm and shoulder muscles. Therefore, chronic load and accumulated fatigue occur to arm and shoulder muscles, which becomes a main cause of upper arm and shoulder musculoskeletal disorders. The shoulder muscles have widely range of motion, and complex interactions take place among various muscles including rotator cuff muscles. In this regard, research on interactions among should muscles, according to such various dynamic motions, is required. Method: Ten male subjects in their 20s participated in this research. This research considered upward, downward, leftward, rightward, forward and backward directions and fourteen muscles around arm and shoulder (biceps brachii and trapezius, etc.) as independent variables. The mean muscle activity was set as the dependent variable. This research extracted $4^{th}{\sim}7^{th}$ repetition signals according to ten times of repetitive muscle contraction, and analyzed the muscle activity concerned using the envelope detection technique. Results: The mean muscle activity of upward direction was analyzed highly statistically significant. The reason is that the effect of gravity works to arm and shoulder muscles. Also, it is conjectured that deformation of coracoacromial ligament was caused, and its contact pressure increased, due mainly to the shoulder flexion, and therefore load was analyzed high. Muscle activity was analyzed significantly low, according to concentric ballistic motion used in the concentric contraction phase by storing elastic energy in the eccentric contraction phase with a motion to bring the weight to the front of subject's body as to downward, leftward and backward directions. Because, elbow joint's flexion-extension motions mainly occurred, biceps brachii was analyzed high muscle activity as the prime mover. Conclusion: The information on the quantitative load of muscles can be applied to ergonomic work design for one-handed manual material handling to minimize muscle load. Application: This research has effectively identified muscle activity according to dynamic contraction by applying an envelope detection technique. The results can be used for ergonomic work design to minimize muscle load during the one-handed manual material handling, according to each direction. The research results are expected to be used for musculoskeletal disorder prevention and physiotherapy in the rehabilitation medical field, based on the muscle load of arm and shoulder in various directions.
The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from a unilateral distal extention removable partial dentures with five kinds of the direct retainers, that is, the bilaterally designed bar clasp of the cross-arch lingual bar and the unilaterally designed bar clasp, circumferential clasp, mini-Dalbo attachment, and telescope retainer. A photoelastic model for mandible was made of the epoxy resin(PL-1) and hardner (PLH-1) with the acrylic resin teeth used and was coated with plastic cement-1 at the lingual surface of the model, and then five kinds of removable partial dentures were set, A unilateral vertical load of about 16Kg was applied on the first molar and the stress pattern of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained: 1. The conventional removable partial denture with the bilaterally cross arch lingual bar produced the most favorable stress distribution on the residual ridge and supporting structure of abutment teeth than the unilaterally designed removable partial dentures. 2. The unilaterally designed removable partial denture with the bar clasp produced the stress distribution on the residual ridge, except sligtly higher stress concentration on the supporting structure of the abutment teeth, similar to the conventional removable partial denture with the bilaterally designed cross arch lingual bar. 3. On the unilaterally designed removable partial dentures, the bar clasp produced greater stress distribution on the residual ridge and supporting structure of the abutment teeth than the circumferential clasp. 4. On the unilaterally designed removable partial dentures, the mimi-Dalbo attachment produced relatively higher stress concentration on the residual ridge, but produced lesser stress concentration on the supporting structure of the abutment teeth than the other direct retainers. 5. On the unilaterally designed removable partial dentures, the telescope retainer produced uniform stress distribution on the residual ridge, but produced higher stress concentration at the root apex of the terminal abutment tooth than the other direct retainers. 6. On the unilaterally designed removable partial dentures the circumferential clasp and telescope retainer produced slightly higher stress concentration on the residual ridge and supporting structure of the abutment teeth than the bar clasp and mini- Dalbo attachment.
Abdallatif Tareq Fahmy;Suh Mancheol;El-All Esmat Abd
한국지구물리탐사학회:학술대회논문집
/
한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
/
pp.157-179
/
2004
The application of magnetic method for archaeoprospection has been carried out through two archaeological areas in Egypt, Abydos and Abu Sir, In order to find out tile ancient Egyptian archaeological features. The magnetic work at the selected archaeological site of Abydos area was carried out by gradiometer survey, while magnetic work at the selected archaeological site of Abu Sir area was carried out by gradiometer survey and magnetic susceptibility measurements. A gradiometer survey with raster of 0.5 m/0.5 m has been carried out on a surface area of $9600 m^2$ at Abydos area to relocate the buried Solar Boats. The magnetic data were processed using Geoplot software to treat the field noises and enhance the quality of the obtained images. The final magnetic images indicate the existence of 12 Solar Boats as well as tombs, remains of ancient rooms and walls. All of them are expected to belong to the Middle Kingdom, particularly from the 18th to 20th Dynasties. Two magnetic tools have been applied over a selected site of $25600 m^2$ at Abu Sir area in order to detect the hidden archaeological features nearby the Sun Temple. The acquisition of the magnetic data was initiated by the measurements of the topsoil magnetic susceptibility of 272 samples collected from the whole studied area, and then followed by the gradiometer survey to measure tile vertical gradient of the geomagnetic field over an area of $14400 m^2$. The magnetic susceptibility results show the presence of high concentration at the middle part of the study area with a little extension to the south western side, with maximum value of about $36{\times}10^5$ SI. They may indicate the proximity of ritual monuments. Also, they offered the site of interest for carrying out a gradiometer survey. The gradiometer results show tile existence of numerous distributed archaeological features made of mud-bricks with different shapes and sizes. They may indicate tombs, burial rooms, dissected walls; all of them are expected to belong to the 5th Dynasty of pharaohs, who used to build their buildings by mud bricks. The depth of the expected buried archaeological features has been estimated from tihe gradiometer. It is around 1.2m for deep features and 0.42 m for shallow features.
2001년 경기도 화성시와 2004년 경상북도 구미시에서 국화의 줄기와 뿌리에 뿌리혹병이 발생하였다. 혹의 모양과 색은 상이하였으나 표면이 거칠고 갈변된 타원형이었다. 혹 조직으로부터 분리한 20개 균주 중 국화의 유묘에 접종하여 혹을 형성한 9개 균주에 대하여 분류학적 특성을 조사하였다. 0.5% $CaCO_3$가 첨가된 PDA배지에서 생장된 콜로니들은 둥글고 볼록하면서 광택이 나는 크림색이었다. 모든 균주는 다수의 편모를 가진 간상의 세균으로 그람음성이면서 호기적으로 생장하였으며 D1M agar 에서도 생장하였다. 병원성 세균들은 대조균주와 상이한 특성을 가지고 있었으나 주요 생리 생화학적특성, 탄소원 이용양상, 지방산조성 비교 결과에 근거하여 8개 균주는 Agrobacterium tumefaciens로 1개 균주는 A. rubi로 동정되었다. A. tumefaciens 계통들은 A. rubi 계통보다 병원성이 강하였으며 기주범위가 넓었다. 국내에서 A. tumefaciens와 A. rubi에 의한 국화의 뿌리혹병은 본 연구에서 처음 보고되는 것이며 자연상태에서 A. rubi에 의해 국화의 뿌리혹병이 발생된 사례는 전 세계적으로 처음이다.
퇴적물의 지화학적 특성을 이해하기 위한 연구의 일환으로 남해 대륙붕에서 채취 된 표층퇴적물에서 9개 금속(Al, Fe, Mn, Cu, Ni, Zn, Co, Cr, Pb)의 함량을 측정하였 고, 선정된 일부 퇴적물에 대해서는 퇴적물내 금속의 화학적 존재형태에 관한 분석을 실시하였다. 퇴적물 중의 금속 함량은 전반적으로 퇴적물의 입도와 밀접한 관련성을 보여 연안해역에서 외해로 갈수록 점차 감소하는 영향을 나타내었다. 한편, 망간과 코 발트의 경우에는 타 금속에 비해 입도와의 관련성덜 뚜렷하였으며, 이것은 이들 두 금 속의 퇴적물내 존재형태별 구성이 타 금속들과 다른 현상에 기인한다. 특히 납의 함량 은 지역적인 차이를 볼 수 있을 만큼 공간적으로 증가, 혹은 감소의 경향이 뚜렷하지 않아 퇴적물내 유입경로가 나머지 금속과 다름을 시사한다. 각 금속의 화학적 존재형 태별 함량은 망간을 제외한 모든 금속에서 잔류부분이 전체함량의 평균 50% 이상을 차 지하여, 미세 광물격자 형태의 존재가 가장 중요한 것으로 나타났다. 잔류부분 외에 구리, 아연, 망간 및 철은 산화물부분에서 다음으로 높은 각각 34.4%, 23.1%, 15.5%, 13.7%의 함량을 보였으며, 카드뮴과 망간, 코발트 및 니켈은 퇴적물의 탄산염부분에서 각각 42.8%, 40.3%, 30.6%, 19.0%로 분포하여 원소별로 다른 존재형태별 함량을 보였 다. 따라서 연구지역 퇴적물내 금속의 분포는 세립한 입도의 광물성분 외에 해수중에 서 의 침전이나 금속산화물과의 공침 등에 의한 특정 지화학 물질내 존재가능성의 차 이에 따라 크게 조절되는 것으로 판단된다.
화분량은 '금천' 수박을 제외하고 응화 1개당 10mg 이상이었다. '복' 수박은 1화당 화분무게가 13.8mg이었고, '스피드꿀' 수박은, 12.1mg으로 겨울철 저온기 재배에 인공수정용 화분생산 품종으로 적당한 것으로 판단된다. 유기용매 침지 후 즉시 건조된 화분발아율은 '금천' 수박이 67%로 기장 낮았고 '아폴로꿀' 수박이 92%로 가장 높았다. 유기용매에 15일간 저장했을 경우 '복' 수박 화분의 발아력이 74%로 가장 높았다. 저장 24일 후에는 5품종 모두 25% 이하의 발아율을 나타내었다. '금천'과 '삼복꿀' 수박의 화분관 신장속도는 $50{\mu}m/hr$ 미만(저장 24일)으로 다른 품종보다 낮았으며, 벌이도중 화분관이 파열되는 경우도 발생되었다. 유기용매 저장 24시간 후 화분발아율은 pentane, ethyl ether, n-hexane, ethyl acetate, acetone에서 각각 45, 39, 34, 23, 19% 순이었고 유기용매 침지시간이 길어질수록 화분활력이 급격히 감소되었다. 화분 표피는 유기용매에 저장한 시간이 길어질수록 장해를 많이 받았는데 유기용매의 종류에 따라 장해정도가 달랐다. '복' 수박이 화분량, 화분활력, 저장성이 우수하였는데 저온기 착과율 증진을 위한 화분생산 품종으로 보여진다.
목적 : 전위된 경골 과간 융기부 골절시 슬개골 하단을 통한 삽관 나사못 고정술의 효용성을 분석하고자 한다. 대상 및 방법 : 1998년 12월부터 2001년 5월까지 성인에서 전위된 경골 과간 융기부 골절을 관절경의 도움 하에 슬개골 하단을 통한 삽관 나사못 고정술을 시행하고 1년 이상 추시가 가능하였던 10예를 대상으로 임상적 및 방사선적 결과를 분석하였다. 결과 : 모든 예에서 골유합을 얻었으며 방사선적 골유합은 평균 9.2주였다 최종 추시시 전방 전위는 전방 stress 방사선상 평균 1.8 mm를 보였으며 KT-2000 arthrometer에서는 평균 1.1 mm였다. 신전 제한은 평균 4.1도를 보였다. 기능적 결과는 우수가 7예, 양호가 3예로 모두에서 만족할만한 결과를 보였다. 결론 : 성인에서 전위된 경골 과간 융기부 골절시 관절경적 수술 방법인 슬개골 하단을 통한 삽관 나사못 고정술은 슬개골 하단의 비관절면을 통하여 삽관 나사못을 고정함으로서 정확한 정복과 견고한 고정을 얻을 수 있었으며, 술 후 조기에 능동적 관절 운동을 허용할 수 있어 간편하면서도 유용한 수술방법이라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.