• 한국해안·해양공학회논문집
• /
• 제25권5호
• /
• pp.327-334
• /
• 2013

수면 위에 놓인 수평 유공판과 입사파간의 상호작용 문제를 선형포텐셜 이론에 기초를 둔 고유함수전개법을 사용하여 해석하였다. 수면 위에 놓인 유공판에서의 경계조건식으로 Zhao et al.(2010)가 제안한 경계조건식을 사용하였다. 유공판이 놓인 유체영역내의 진행파 성분을 나타내는 첫 번째 고유값의 허수부가 유공판의 구멍을 통과하면서 발생하는 에너지 손실과 밀접한 관련이 있다. 유공판의 공극율과 폭 그리고 입사파의 주파수와 입사각도를 변화시키면서 반사율, 투과율, 그리고 파랑하중의 변화를 살펴보았다. 공극율 계수가 최적값 b = 5.0일 때, 유공판의 폭과 입사각도가 증가할수록 투과율은 크게 줄어드는 것을 확인하였다.

• 한국해안해양공학회지
• /
• 제16권2호
• /
• pp.83-91
• /
• 2004

수면 위에 고정된 수평막에 의한 파랑제어성능을 선형포텐셜이론을 사용하여 해석하였다. 고유함수 전개법을 적용하기 위하여 유체영역을 수평막이 없는 영역과 있는 영역으로 나누고 두 영역이 만나는 경계면에서 각 영역의 해를 정합 시켜 완전한 해를 구하였다. 본 해석방법은 Cho and Kim(1998)과 같이 경계치문제를 회절과 방사문제로 나누어 풀지 않고 산란문제를 직접 풀어 동일한 해를 구하는 해석방법이다. 개발된 해석모델을 검증하기 위하여 2차원 조파수조(36m${\times}$0.91m${\times}$1.22m)에서 모형실험을 수행하였다. 해석결과와 모형실험결과는 정성적으로 잘 일치하고 있음을 확인하였다. 수평막의 길이와 초기장력 그리고 입사파의 주파수를 바꿔가면서 반사율과 투과율을 살펴보았다.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.158-173
• /
• 1985

본 연구에서는 상호작용상류의 난류경계층에 분출을 가해서 경계층을 불안정 화시키고 이 불안정화된 난류경계층과 사각입사충격파와의 상호작용을 실험적으로 연 구하였다. Squire-Smith와는 다른 실험모형의 새로운 형태를 제시하였고 상호작용영 역에서 경계층의 압력분포 및 속도분포를 측정해서 충격파반사의 형태를 밝혔다.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.43-53
• /
• 1993

부유체 강제동요문제를 수치해석하는 데에는 두가지 어려움이 따른다. 첫째는 교차점주위의 급격한 유동이고 둘째는 무한원방처리이다. 본 논문에서는 무한원방처리에 주안점을 두어, 자유표면의 Taylor 전개 및 F.F.T. 적용으로 계산시간을 단축시켜 수치해석하였다. 즉 Green 정리를 이용하여 해를 표현한 후, 축차방법에 의하여 해를 구한다. 축차단계에서는 계산식을 자유표면 기울기에 대하여 Taylor 전개하여 Convolution 형태로 변형한 후 F.F.T. 를 적용함으로써 계산시간을 O(Nlog N)으로 유지할 수 있었다. 수치검증을 위하여 부유체 선형문제와 압력장의 비선형 문제를 수치해석하여 비교하였고, 이를 확장하여 부유체의 강제동요문제를 수치해석하였는데, 계산시간을 O(Nlog N)으로 유지하면서 수치해석할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.907-916
• /
• 2020

This research was conducted to investigate the linear expansion and resistance properties of a composite board (com-ply). This board was made of medium-density fiberboard (MDF) laminated using avocado (Persea americana), mahogany (Swietenia mahogani), and pine (Pinus merkusii) veneers. These three types of veneers were laminated on both surfaces of the MDF using adhesives, namely, epoxy and isocyanate. Glue (250 g·m^-2) was spread on the surface, followed by cold press for 3 h with an applied pressure of 15 kg·cm^-2. The research result revealed that com-ply exhibited an increased dimensional stability compared with MDF, indicated by reduction in water absorption, thickness swelling, and linear expansion. The com-ply made of the pine veneer and isocyanate adhesive exhibited high density, water absorption, thickness swelling, and screw withdrawal load. The com-ply that exhibited the strongest resistance to drywood termite attacks was the one made of the mahogany veneer and isocyanate adhesive. Moreover, the com-ply that exhibited the biggest weight loss (3.6 %) was made of the pine veneer and epoxy adhesive. The results of this research may facilitate in manufacturing com-ply using the selected veneer and adhesive without the application of hot press.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.206-214
• /
• 2017

In this study, measurement of thermophysical properties of materials at high temperatures was performed. This experiment employed a heater device to heat the material to a high temperature. The images of the specimen surface due to thermal load at various temperatures were recorded using charge-coupled device (CCD) cameras. Afterwards, the full-field thermal deformation of the specimen was determined using the digital image correlation (DIC) method. The capability and accuracy of the proposed technique are verified by two experiments: (1) thermal deformation and strain measurement of a stainless steel specimen that was heated to $590^{\circ}C$ and (2) thermal expansion and thermal contraction measurements of specimen in the process of heating and cooling. This research focused on two goals: first, obtaining the temperature dependence of the coefficient of thermal expansion, which can be used as data input for finite element simulation; and second, investigating the capability of the DIC method in measuring full-field thermal deformation and strain. The results of the measured coefficient of thermal expansion were close to the values available in the handbook. The measurement results were in good agreement with finite element method simulation results. The results reveal that DIC is an effective and accurate technique for measuring full-field high-temperature thermal strain in engineering fields such as aerospace engineering.

• Journal of Oral Medicine and Pain
• /
• 제12권1호
• /
• pp.27-40
• /
• 1987

When the men die, uniform changes progress. Many investigators have studied about the time after death, but it's very difficult to measure the time elapsed since death, particularly in highly decomposed or probably skeletonized bodies. But the teeth are very stable to the changes of physical and chemical properties and their changes are very slow. At this point of view, the author studied this theme as one of the pioneers in our country. In this study, the author observed the degree of the dentinal expansion and the crack of enamel and cementum of the teeth which had been extracted from December, 1983 to September, 1987. The teeth were extracted from the male and female who was 18 to 85 year old. The results are followed; 1. The degree of dentinal expansion increased rapidly until 7 months with high degree and then decreased slowly. 2. The equation of regression for representing x as the degree of the dentinal expansion and y as the time elapsed since death, is y = 29.43-1.13x (p<0.05) 3. The crack of the enamel surface seemed to begin at 1 year from extraction and to increase apparently before or after 20 months. 4. The crack of the cementum began at 3 months from extraction and dendrite crack began at 16 months from extraction. After this, the crack increase continuously and the rate of cracking were more rapid as compared with that of enamel. 5. It seems to be useful to measure the time elapsed since death using the degree of dentinal expansion and the crack of enamel and cementum, particularly in the old bodies after death.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.503-509
• /
• 2002

입력단 및 출력단이 동심을 이루어 원형 확장관 안으로 연장되어 있는 소음기가 관내 전달 소음저감을 위해 널리 사용되고 있다. 이 소음기의 저주파수 영역에서의 소음저감 효과는 음파 진행 단면의 확장-축소와 입력단 및 출력단의 상대적 위치 등으로 발생되는 소음기의 리액티브 성분에 의해 설명이 된다. 본 논문에서는 입력단 및 출력단에 동심으로 배치된 연장관이 단순 팽창형 소음기 내부에 삽입되어 있는 경우에 대한 음향해석을 수행하였다. 해석방법으로는 음장을 분리좌표계로 표현될 수 있는 몇개의 경계 표면으로 나누고, 각 표면에서의 음압 및 입자속도를 정규화 된 음향 고유 모드로 전개하여 간단한 대수식으로 표현하였다. 이 해석적인 방법을 사용하여 소음기의 투과손실을 예측하였으며, 실험과도 잘 일치함을 관찰할 수 있었다.

• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.429-437
• /
• 1999

A mathematical model was established for estimating changes in pressure and volume of permeable kimchi packages. The model comprises the CO2 gas production from kimchi and permeation of O2, CO2 and N2 through the permeable film or sheet. Using the developed model, the effects of various packaging variables on the pressure and volume changes were analyzed for rigid and flexible packag es of kimchi(3% salt content) at 15oC, and then effect of storage temperature was also looked into. In case of rigid pack of 400g, using the plastic sheet of high CO2 permeability and initial vacuumizing can help to relieve the problem of pressure build up. The lower fill weight can further reduce the pressure, but will result in higher packaging cost. For the flexible package of 3 kg, highly permeable films such as low density polyethylene(LDPE) and polypropylene can reduce the volume expansion. Higher ratio of CO2 permeability to O2 and N2 permeabilities are effective in reducing the volume expansion. Increased surface area cannot contribute to reduction of volume expansion for highly permeable flexible packages of kimchi. For the impermeable packages, pressure and volume at over ripening stage (acidity 1.0%) increase with decreased temperature, while those at optimum ripening stage(acidity 0.6%) change little with temperature. Pressure of permeable rigid LDPE package increases with tem perature at any ripening stage, and temperature affects the volume of flexible LDPE package very slightly. Experimental verification of the present results and package design with economical consid eration are needed as a next step for practical application.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.66-72
• /
• 2003

Recently, the steel parts used at the aerospace and automobile industries are required to be used light weight parts. Therefore, used material, steel have to be a high stress, which is an indispensable condition in this field. At the consideration of parts design, high hardness of the lightweight parts have an benefit of saving fuel and material. A high stress of metal has a point of difference according to the shape of design, external cyclic load and condition of vibration. A crack generates on the surface of metal or under yield stress by defect of inner metal defect or surface defect and slowly, this crack grow stable growth. Finally, rapidity failure phenomena is happen. Fatigue failure_phenomena, which happen in metal, bring on danger in human life and property therefor, anti-fatigue failure technology take an important part of current industries Currently, the shot peening is used for removing the defect from the surface of steel and improving the fatigue strength on surface. Therefore, this paper investigated the effect on frcature toughness using shot peening which is improve the resistance of crack growth and crack expansion rate by fatigue that make a compressive residual stress on surface.