• Journal of fish pathology
• /
• v.18 no.1
• /
• pp.29-37
• /
• 2005

This study investigated external symptoms, behavior characteristics and the distribution pattern of the scuticociliates in the skin, gill and blood vessel of the tiger puffer, Takifugu rubripes, infected with scuticociliates among tiger puffer cultured. The fish infected with scuticociliates did not show any external symptoms, such as change in body color or swimming behavior, in the early infection stage. However, they showed congestion, erosion, and ulcer on the skin and fin at advanced stages. They showed a turning movement, mainly stayed on the bottom, and swam with their mouths open at the surface of water. Some fish showed a sudden swimming movement of zigzag type. The scuticociliates were ovoid in shape and $20\times40{\mu}m$ in size. The scuticociliates had a contractile vesicle and a caudal cilium that ranged 10-12 ${\mu}m$, and reproduced by binary fission. Therefore the scuticociliates were identified as ciliated, belonging to class Hymenostomatia, order Scuticociliatida in morphogenetic character. The gills infiltrated with scuticociliates showed clubbed gill filament due to hypertrophy of gill lamella. Within the blood vessels, scuticociliates were observed one to ten individuals, depending on diameter of the blood vessels. Some of the scuticociliates were observed to have ingested erythrocytes.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.324-333
• /
• 2013

Recently, rudder erosion due to cavitation has been frequently reported on a semi-spade rudder of a high-speed large ship. This problem raises economic and safety issues when operating ships. The semi-spade rudders have a gap between the horn/pintle and the movable wing part. Due to this gap, a discontinuous surface, cavitation phenomenon arises and results in unresolved problems such as rudder erosion. In this study, we made a rudder model for 2-D experiments using the NACA0020 and also manufactured gap flow blocking devices to insert to the gap of the model. In order to study the gap flow characteristics at various rudder deflection angles($5^{\circ}$, $10^{\circ}$, $35^{\circ}$) and the effect of the gap flow blocking devices, we carried out the velocity measurements using PIV(Particle Image Velocimetry) techniques and cavitation observation using high speed camera in Seoul National University cavitation tunnel. To observe the gap cavitation on a semi-spade rudder, we slowly lowered the inside pressure of the cavitation tunnel until cavitation occurred near the gap and then captured it using high-speed camera with the frame rate of 4300 fps(frame per second). During this procedure, cavitation numbers and the generated location were recorded, and these experimental data were compared with CFD results calculated by commercial code, Fluent. When we use gap flow blocking device to block the gap, it showed a different flow character compared with previous observation without the device. With the device blocking the gap, the flow velocity increases on the suction side, while it decreases on the pressure side. Therefore, we can conclude that the gap flow blocking device results in a high lift-force effect. And we can also observe that the cavitation inception is delayed.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.207-231
• /
• 2017

Printmaking is a field of fine arts and is placed on a vague boundary that is perceived as a commercial product with a popular character due to the speciality of editions. Advances of modern science and technology has developed a new technique of printmaking, and the fusion of printmaking and computer has shown the possibility of reproduction art. Reproduction printmaking has been heavily influenced by photography and extended areas, and the various forms of printing have brought about many changes and attempts by stimulating the possibilities of indirect art at various angles. As the history of printmaking and technology closely relate, the development of computer makes widespread expansion of plural artistry, technological and artistic change. A new conceptual shape can be created on the copied image simply by placing the material of the print on the smoothly flat surface expressed in digital form. The process and the result of such work show the area of unique work which is different from the value of the $\grave{a}$ la carte art or the characteristics of the material given by the print. The deprecated perception of reproducibility evaluated the value of the work in a direct sense of printmaking. It is undeniable that it is devalued by a bundle of works regardless of the value of each edition. However, the physical properties of the prints on the paper are brought up with hand drawings drawn on the canvas by hand. And it becomes an opportunity to show new aspect and change through the process of combining digital print information on paper. The diversity of media is sometimes a controversy of identity between art and technology. In the future, it should be discussed how the limit of the media which can be enjoyed in the field of art can be set as a standard.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.465-482
• /
• 1997

In this paper, we have studied on cinstructing code-recognition shstem by neural network according to a image process taking the DOT classification code stamped on tire surface.It happened to a few problems that characters distorted in edge by diffused reflection and two adjacent characters take the same label,even very sen- sitive to illumination ofr recognition the stamped them on tire.Thus,this paper would propose the algorithm for tire code under being cinscious of these properties and prove the algorithm drrciency with a simulation.Also,we have suggerted the MCBP network composing of multi-linked recognizers of dffcient identify the DOT code being tire classification code.The MCBP network extracts the projection balue for classifying each character's rdgion after taking out the prjection of each chracter's region on X,Y axis,processes each chracters by taking 7$\times$8 normalization.We have improved error rate 3% through the MCBP network and post-process comparing the DOT code Database. This approach has a accomplished that learming time get's improvenent at 60% and recognition rate has become to 95% from 90% than BckPropagation with including post- processing it has attained greate rates of entire of tire recoggnition at 98%.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.166-173
• /
• 2017

Morphological and population characteristics of the Cottus koreanus were investigated at Hoam stream from October 2015 and April 2016. This is the first record on C. koreanus not only from Hoam stream (the upstream region of Daejong stream, Gyeongsangbuk-do Gyeongju-si Yangbuk-myeon Hoam-ri) but also from the stream flowing into the Samcheogosip stream, in the southern part of East Sea, Korea. The distribution of C. koreanus ranged from Girim temple to Yongyeon waterfall, about 1.2 km, and the water surface were about $3,600m^2$. The population size was assumed to 1,656 individual number, 46 object per $100m^2$. The morphometric characteristics of C. koreanus in the Hoam stream and the Han river are very similar except that the population at Hoam stream shorter head length, ventral fin ray length, pectoral fin ray length and mouth width when compared with the population at Han river. Other than that, the two populations showed the same meristic characters. Frequency analysis of total length indicated that the group with 40~59 mm in total length was one year old, the 60~79 mm was two years old, and the group over 80 mm was three years old. The average number of eggs in the ovaries was estimated as 361 (239~468) per matured female. The number of matured eggs size in ovaries was $2.6{\pm}0.21$ (23.~3.1) mm and this species was large eggs type. Calculation of the length-weight relation of C. koreanus showed the value of constant a as 0.00001 and b as 3.01, and the Condition factor (K) was 1.26 an on average.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.484-514
• /
• 1994

Cantilever bridge is widely used by mny clinicians, but its worst mechanical character, so called Class I lever system, makes dentists hesitate to restore the missing tooth with it. Therefore it is important to study stress of the cantilever bridge. In this study, two models of cantilever bridges that restores the missing mandibular second molar with two abutment teeth were constructed. One model was a type of cantilever bridge supported by a normal alveolar bone, the other one was supported by an alveolar bone resorbed to its 1/3 of root length. Maximum bite force(550N) and funtional maximum bite force(300N) were vertically applied to the distal end of the pontic, distal 1/3, and distal half of the pontic. And each force was also applied to centric occlusal contacts as a distributed force. Total 16 loading cases were compared and analyzed with 3-dimensional finite element method. The results were as follows: 1. The stress was concentrated on the joint of the pontic and the retainer, grooves, and distal cervical margin of the posterior retainer. 2. In case of maximum bite force(550N) at the end of the pontic, the risk of fracture at the joint of the pontic and the retainer was high. 3. In case of distributed force in centric occlusion and functional maximum bite force(300N), the stresses were less than the yield strength of the type VI gold for any loading cases. 4. In case of alveolar bone resorption, the occlusal force to the cantilever pontic caused more stress on the root apex and less stress on the alveolar crest region of the distal surface of the posterior abutment. 5. In case of alveolar bone resorption, the displacement was larger than that of normal alveolar bone in all loading cases.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.40-40
• /
• 2010

Studies on attractive color changing property of dye chromophore and fluorophore have been greatly enjoyed in the related industrial and research fields such as optoelectronics, chemosensor, biosensor and so on. The optical property based on D-$\Pi$-A intramolecular charge transfer (ICT) system of chromophore molecules can be utilized as suitable sensing probes for checking media polarity and determining colorimetric chemosensing effect, especially heavy metal detection. These finding are obtained by absorption and emission properties. In this work, donor-acceptor D-$\Pi$-A type fluorescent dyes were designed and synthesized with the corresponding donor and acceptor groups. The selected donor moieties might be provided prominent amorphous properties which are very useful in designing and synthesizing functional polymers and in fabricating devices. Another reasons to choose are commercial availabilities in high purity and low price. Donor-bridge-acceptor (D-A) type dyes can produce impressive optical-physical properties, yielding them potentially suitable for applications in the synthesis of small functional organic molecules. Small organic functional molecules have unique advantages, such as better solubility, amorphous character, and represent an area of research which needs to be explored and developed. Currently, their applications in metalorganic compounds is rapidly expanding and becoming widespread in self-assembly processes, photoluminescence applications, chiral organocatalysts, and ingrafts with nanomaterials. Colloidal nanoparticles have received great attentions in recent years. The photophysical properties of nanoparticles, particularly in terms of brightness, photostability, emission color purity and broad adsorption range, are very attractive functions in many applications. To our knowledge background, colloidal nanoparticles have been enjoyed their applications in bio-probe research fields. This research interest can be raised by the advantages of the materials such as high photoluminescence quantum yields, sharp emission band, long-term photostability and broad excitation spectra. In recent, the uses of nanoparticles being embedded in a polymer matrix and binded on polymer surface have been explored and their properties such as photo-activation and strong photoluminescence have been proposed. The prepared chromophores and nanoparticles were investigated with absorption and emission properties, solvatochromic behaviors, pH induced color switching effects, chemosensing effects and HOMO/LUMO energy potentials with computer simulation. In addition, synthesized fluorophore dyes and particles were applied onto PE/Aramid fiber fluorescing colorations. And the related details were then discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.124-132
• /
• 2002

In this paper, we present a vision algorithm and method for input image improvement and preprocessing of dented and raised characters on the sidewall of tires. we define optical condition between reflect coefficient and reflectance by the physical vector calculate. On the contrary this work will recognize the engraved characters using the computer vision technique. Tire input images have all most same grey levels between the characters and backgrounds. The reflectance is little from a tire surface. therefore, it's very difficult segment the characters from the background. Moreover, one side of the character string is raised and the other is dented. So, the captured images are varied with the angle of camera and illumination. For optimum Input images, the angle between camera and illumination was found out to be with in 90$^{\circ}$. In addition, We used complex filtering with low-pass and high-pass band filters to improve input images, for clear input images. Finally we define equation reflect coefficient and reflectance. By doing this, we obtained good images of tires for pattern recognition.

• Sijohaknonchong
• /
• v.24
• /
• pp.113-137
• /
• 2006

This paper is a study on the Jeonwonsasiga of Shin Gye Young. Jeonwonsasiga is as a out of Sasiga-Line(사시가계) Yeonsijo(연시조), the singing Spring. Summer. Autumn, Winter and Jesuk. The meanwhile, a study on the Jeonwonsasiga is in the relations with other literary works, or a history of Siga in 17th century. A out of specific character's of Jeonwonsasiga is the singing Spring, Summer, Autumn, Winter and Jesuk about order. Jesuk with a New year's Eve, is the stand for a watch night.'Chun Ha Chu Dong(Spring, Summer, Autumn, Winter, 춘하추동)' are included in the Sasi of One Year(일년 사시), And the Jesuk is included in the Sasi of one day(하루 사시). Buy the way, Jeonwonsasiga make an equal about all of two. And then, this paper is focused on the 'Jesuk'. The role of Jesuk is coexistence together with the Sasi of One Year and the Sasi of one day. That is to say, Jeonwonsasiga's singing from the 1st works to the 8st works are the Sasi of One Year in the surface. But, singing the Sasi of One Day of 'Dan Ju Mo Ya(단주모야)' in the inside story. And Jesuk is a finished role the mean's of literary works. And this provide an opportunity which can be speaker's recognition of Jeonwon (전원). The Jeonwonsasiga of ten works are have a value of Yeonsijo in continyal structure. And so. it is to be watched sense of proportion of Yeonsijo in the 17th century.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1105-1123
• /
• 2018

The main risk factors of tunnel excavation through urban areas are ground settlement and surface sink which caused by ground conditions, excavation method, groundwater condition, excavation length, support method, etc. In the process of ground settlement assessment, the numerical analysis should be conducted considering the displacement and stress due to tunnel excavation. Therefore a technique that can simplify such process and easily evaluate the influence of tunnel excavation is needed. This study focused on the tunnelling-induced ground settlement which is main consideration of underground safety impact assessment. The parametric numerical analyses were performed considering such parameters as ground conditions, tunnel depth, and lateral distance from tunnel center line, etc. A simplified ground settlement evaluation chart was suggested by analyzing tendency of ground subsidence, lateral influence area and character by depth. The applicability of the suggested settlement evaluation chart was verified by comparative numerical analysis of settlement characteristics.