• Journal of Chest Surgery
• /
• 제24권4호
• /
• pp.390-396
• /
• 1991

From July 1984 to September 1990, 316 patients of congenital heart diseases were operated and 15 patients died. Hospital mortality was 4.75%. Five patients of 73 PDA had residual shunt after operation: 4 were ligated under support of Dacron patch, 1 was closed through the pulmonary arteriotomy under CPB. 3 patients were reoperated. No patient had residual shunt or reopening among the patients of simple ligation or division and suture. During the ligation of PDA, Dacron patch for protection from tearing may disturb the complete interruption of shunt. If the tissue around the ductus arteriosus looks weak or fragile, division and suture may be more reliable other than ligation with supporting patch. If the septal leaflet of tricuspid valve is adherent around the VSD, remained opening of VSD may be closed with simple suture directly. In these cases, the incidence of postoperative residual shunt is as high as the incidence of more large VSD closed with patch [10.9%: 9.6%]. During the direct closure of remained opening of VSD, another leaking route should be looked for carefully beneath the septal leaflet of tricuspid valve.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.65-78
• /
• 2015

In recent years, implants have gained growing importance in all areas of medicine. The success of the treatment depends on many factors affecting the bone-implant, implant-abutment and abutment-prosthesis interfaces. In this paper, static and dynamic behaviors of the dental prosthesis are investigated. Three-dimensional finite element models of dental prosthesis were constructed. Dynamic loads in 5 sec applied on occlusal surface. Therefore, FEA was selected for use in this study to examine the effect of the static and dynamic loads on the stress distribution for an implant-supported fixed partial denture and supporting bone tissue.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.371-378
• /
• 2011

Transposition is defined as a dental anomaly manifested by a positional interchange of 2 adjacent teeth within the same quadrant of the dental arch. Maxillary canine-first premolar [Mx4-3] transposition is the most frequent tooth transposition reported in the literature. In this case report, an orthodontic correction of a transposition of the maxillary left canine and first premolar with the help of palatally located mini-implant anchorage is described. Esthetic and occlusal evaluations suggested alignment of the transposed teeth to their correct anatomic positions in the dental arch. The clinical result at the end of the treatment was satisfactory. Alignment was obtained, and intercuspation was adequate. Nevertheless, the maxillary canine showed facial recession, probably because it was initially positioned buccally. Supporting tissue was examined after treatment and no alveolar bone damage was observed.

• 한국CDE학회논문집
• /
• 제11권5호
• /
• pp.351-358
• /
• 2006

Recently, the development of new structural model in fixed partial denture system is required to be started from the conceptual design with low cost, high performance and quality. In this point, a FEM based design of partial denture is used to investigate stress distribution on the durable shape. In this paper, the structural performances of partial dentures were analyzed under three biting forces. The periodontal embedding model is introduced on behalf of the detailed supporting tissue, which is composed of dentin, cortical bone, cancellous bone and periodontal ligament. Using topology optimization, the optimal reinforcement layout of connector was obtained and the detail shape in the fixed partial denture was designed.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.38-43
• /
• 2021

Photocurable hydrogels are widely used as 3D printing materials in tissue engineering (e.g., scaffold fabrication) as well as optical fibers (or optical sensors) materials. Photocurable hydrogels can control optical and mechanical properties such as chemical or fabrication conditions. In previous research, we introduced a new 3D printing method to fabricate a freestanding overhanging hydrogel structure without supporting structure. This study was measured and analyzed the difference of the mechanical properties of the photocurable hydrogel according to the light intensity using a micro tensile tester. In practically, it was difficult to perform a direct tensile test on a micro (less than 1 mm) size fiber. In this study, the tensile test of the hydrogel fibers could be measured simply and repeatedly using a paper carrier.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.235.1-235.1
• /
• 2003

With an aim of obtaining high efficacy in cartilage regeneration, implantable polymeric rods were fabricated. These rod-type matrices were anticipated to perform structural tissue supporting activity and enhance extracellular matrix (ECM) formation by releasing specific agent, DHEA-S, in controlled manner. It is expected that application for the drilling operation on the articular cartilage of OA patients as the implants may promote regeneration of their cartilage. Osteoarthritis (OA) is a degenerative joint disease characterized by progressive loss of articular cartilage, subchondral bone remodeling, spur formation, and synovial inflammation. (omitted)

• Applied Microscopy
• /
• 제32권3호
• /
• pp.213-222
• /
• 2002

피조개의 외투막은 바깥 상피층, 결합조직층 그리고 안쪽 상피층으로 구성되어 있다. 상피층은 단층으로 지지세포, 섬모세포 및 분비세포들로 구성되며, 결합조직층은 주로 교원섬유와 근섬유로 이루어져 있다. 안쪽 상피층의 지지세포들은 원주형으로 자유면은 미세융모로 덮여있다. 섬모세포들은 자유면에 섬모와 미세융모를 가지며, 이들 세포의 세포질 상부에서는 다수의 관상 미토콘드리아들이 관찰된다. 분비세포들은 주로 바깥 상피층에서 관찰되며, 분비과립의 형태학적 특징에 따라 A, B, C, D 네 종류로 구분할 수 있다. A형 분비세포들은 점액세포들로서 가장자리와 중앙부의 외투막에서 주로 관찰되며, 이들 세포의 분비과립은 전자밀도가 낮고 막을 가지지 않는다. B형 분비세포들은 발달된 다수의 조면소포체와 골지체 그리고 전자밀도가 높고 막을 가진 분비과립들을 함유한다. C형 분비세포들의 분비과립은 섬유성분의 중심부와 균질성의 주변부로 구분된다. D형 분비세포들은 주로 중앙부와 각정부 외투막의 바깥 상피층에서 관찰되며, 이들 세포의 분비과립은 균질성의 중심부와 과립상의 주변부로 구분된다. 이와 같은 결과들은 피조개 외투막의 바깥 상피층은 패각형성에 관여하며, 안쪽 상피층은 외투강 정화에 관여함을 의미한다.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.109-122
• /
• 1984

The purpose of this study was to analyze the magnitude and mode of the stress distribution induced in the supporting alveolar bone and periodontal ligament and, to determine the displacement of abutment teeth and telescope denture base by applying chewing force to the telescope denture quantitatively and qualitatively. Two finite element models of telescope denture that were restored the missing mandibular second molar with two abutment teeth which were constructed. In two different models, parallel and tapering type telescope crowns were constructed. These finite element models of two cases used for these experiment were a two-dimensional mesiodistal section of the mandibular second bicuspid and first molar. Chewing force of 25Kg that was devided in the ratio of 45/155 (29%) in bicuspid and 55/155 (35.5%) in molars was applied to telescope denture and abutment teeth respectively. The displacement of the telescope denture base and abutment teeth and the stress distribution in the periodontal ligament and alveolar bone were analized to investigate the influence of chewing force acting on the telescope denture and abutment teeth. The results were as follows: 1. Abutment teeth displaced mesially and the magnitude of displacement of abutment teeth in vertical direction were more than that of horizontal direction in two cases. The displacement of abutment teeth on the telescope denture treated with tapering type telescope crown were less than that of the parallel type crown. 2. The displacement of the telescope denture base that were treated with parallel type telescope crown were less than that of treated with tapering type telescope crown. 3. The stress induced in the alveolar bone and periodontal ligament on abutment teeth that treated with parallel type telescope crown were more than that of treated with tapering type telescope crown and more stress induced in the alveolar bone than in the periodontal ligament. 4. In the telescope denture, the magnitude of displacement of abutment teeth and stress induced in the periodontal ligament and alveolar bone were within physiologic limit.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.351-384
• /
• 1993

Complete denture occlusion must be developed to function efficiently and with the least amount of trauma to the supporting tissues. For the preservation of supporting tissues, it is imperative to reduce to a minimum the functional stress induced by dentures. The magnitude of the horizontal component of functional stress contributed by various occlusal teeth forms has not been studied. This study was aimed to investigate the influence of different occlusal teeth forms on the mode of distribution of the stresses in the mandibular tissue, and the displacement of lower dentures during the variant functional movement of mandible for this study three dimensional finite element analysis was used. FEM models were created using commercial software Super Sap for IBM 32 bit computer. The model was composed of 3380 brick elements and 4346 nodes. The results were as follows. 1. The magnitude of stress was similar between two models in centric occlusion, in the case of anatomic model, the stress was concentrated on the buccal side of alveolar ridge beneath the bicuspids. 2. During the protrusive movement, the increasing of stress from the posterior to anterior part of mandible was seen in the case of anatomic model. 3. During the lateral movement, the stress of anatomic model was greater than that of nonanatomic model. 4. The stress of anatomic model was concentrated on the anterior region of residual ridge during the lateral movement. 5. In the case of anatomic model the anterior part of denture was displaced severely at the centric and lateral position, but the denture of nonanatomic model was displaced minutely at the protrusive and lateral position.

• 감성과학
• /
• 제7권2호
• /
• pp.179-186
• /
• 2004

중추신경계는 일단 손상이 되면 손상된 세포의 재생, 손상된 수초의 회복, 신경계의 정상적인 연결 등의 제한성 때문에 그 회복이 매우 힘들다. 이러한 중추신경계의 중요한 손상으로는 다발성 경화증, 뇌졸중, 척수손상, 외상, 축삭의 탈수초화 등이 있다. 이전 연구들은 많은 발생빈도를 보이고 있는 척수손상에서 실질적인 척수의 기능적인 회복을 위해 손상된 척수신경의 재생과 축삭의 재수초화가 중요한 요인이라고 전하고 있다. 최근에는 이러한 척수손상에 대한 치료적 접근으로서 세포이식 기술이 하나의 해결책을 열어주고 있다. 따라서 본 논문에서는 척수손상의 특성을 살펴보고, 척수손상에 의한 기능장애에 대해 세포이식이 기능의 회복을 증진시킬 수 있다는 증거를 논의하고자 한다.