• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.53-59
• /
• 2002

This study is research for effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement by practicing involved lower limb weight bearing training of three weeks period to improve standing equilibrium problem with asymmetric weight supporting rate of hemiplegia. In result of the study, it has shown that P-value incase of involved supporting rate is lower than level of significance $\alpha$<.05 and mean improvement rate of experienced group is higher in comparison with controlled group and experienced group. In changing quantity of involved maximum supporting rate, P-value is .26 and higher than level of significance $\alpha$<.05, and so it did not show significant difference statistically. But in case of experienced group between pre and post-test, involved side supporting rate and involved side maximum supporting rate showed significant improvement in all. In comparison of relative characteristic training effect difference, it was shown that train-learning effect on case of 40-60 years old, hemorrhagic patient and standard body bun of patient is valuable, which showed significant improvement in case of paralytic side and disease period, it did not show significant difference on excercise learning effect in two above cases. In the above result, we can say that continuous weight bearing training on the involved lower limb for three weeks period help improve the involved side supporting rate of hemiplegia. Accordingly, the weight bearing training on the involved lower limb is training method that patient can easily train with simple guidance of therapists, without being special expensive equipment. Furthermore it can be helpful to establish home therapeutic plan for hemiplegia through education of a patron.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.2
• /
• pp.24-34
• /
• 2018

Purpose: The purpose of this study was to assess how much neurac technic affects the stability muscles of the shoulder according to the supporting surface in crawling position. Method: 29 healthy adult males participated in this experiment. The experiment consists of 2 experimental groups and 1 control group. It is conducted for 3 weeks. Each group exercised for 7 seconds and then rested for 3 seconds. Using EMG, the average value of serratus anterior, upper trapezius, and lower trapezius was repeated three times. Experimental group 1 conducted push up plus exercise applied neurac technic with sling on unstable supporting surface. Experimental group 2 conducted push up plus exercise applied neurac technic with sling on stable supporting surface. Control group conducted the push up plus exercise on stable supporting surface. One-way ANOVA was used for statistical analysis. Result: It was noticeable that the result of Experimental group 1 affects stability muscles of more than Experimental group 2 and Control group. Conclusion: Push up plus position applied neurac technic with sling on unstable supporting surface was the most effective in activating the stability muscles of the shoulder.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.62-70
• /
• 2005

In this paper, we present an architecture for supporting QoS multicast routing in mobile ad-hoc networks. The proposed architecture consists of three parts as follows. The first part is a mobility-based clustering as underlying structure for supporting stable multicast services. In the second part, a framework which can support and evaluate the stability of route and network for supporting QoS routing is presented. In the third part, we describe a method which uses two structures of the first and second parts for supporting QoS multicast routing services. The performance evaluation of our proposed architecture is accomplished via modeling and simulation using the Optimized Network Engineering tool(OPNET).

• Journal of Digital Convergence
• /
• v.9 no.5
• /
• pp.45-54
• /
• 2011

The purpose of this research was to examine the whether to recognition of the long-term care insurance have affected on aged parent-supporting. The research method was used self-report questionnaire to 331 persons who was supported their parents. And I used the Frequency, simple linear regression as an analysis methods. The result demonstrated that Educational background, the emotional intimacy of the subjects, and the recognition degree of the long-term care service have significant influence on their physically parent supporting consciousness. The researchers suggest the need of family support system based on the result for decrease the parent-supporting burden in middle age generation.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.194-201
• /
• 2009

The purpose of this study is to develop basic data for the efficient space plan of the Department Store focusing on users by survey of preference to methods of plan considering the functional phase, the economical phase and the adaptable phase. The results are as follows : First, we could know that users had the low degree of satisfaction to the adaptable phase of space plan for Supporting Facilities in department stores at the present time. Second, we must have the appropriate space size by using structure, doors and windows for user's satisfaction. This is the method of plan considering the functional phase for Supporting Facilities. And we could think that the methods of using the center flow plan and the arrangement of two or three facing are good for user's satisfaction. Third, it will be efficient plan if we find methods to be cleaned the structure easily and to be changed and repaired the system furniture easily for management. that methods are to be considered the economical phase for Supporting Facilities. Forth, methods of plan considering the adaptable phase are to change the size of space by using the movable type furniture and the form of space by changing structure.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.471-478
• /
• 2004

This paper describes the plagiarism inspection supporting system of typical cultural contents or properties such as game programs, cultural contents of natural language documents and art works and proposes the cultural contents the plagiarism inspection supporting system For this, firstly, a survey of plagiarism inspection methods and tools for supporting Plagiarism inspection about programs, cultural contents of natural language documents are discussed. Secondly, the technical method for supporting plagiarism inspection of cultural art works by analyzing the drawing characteristics of authors is proposed. Finally, the experimental results show the effectiveness of this paper.

• Explosives and Blasting
• /
• v.16 no.2
• /
• pp.23-33
• /
• 1998

This study has been carried out to design the standards of rock bolts which are recommended to be used for supporting material in Seong Ju tunnel, Under recently planned to construct. Due to the weak bedding rocks along the Tunnel, NATM supporting method is assumed to be applied and the design and calculation for rock bolts which are important material for this supporting method. Though the study, the results obtained are as follows. 1) The rocks defined s coarse sandstone, fine sandstone, medium sandstone, sandy shale and silty shale are normal rocks in strength, and black shale, greywacke and conglomerate are weak rocks in strength. 2) When the length of 3∼4meters of rock bolts are used, the distances of bolts are supposed to be 1.3∼1.8m in sandstone and 1.3∼2.0m in shale and for greywacke the distance should be 1.5m.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.457-457
• /
• 2000

The display module of PDP consists of a pair of fine electrode patterned panels. For example, in case of 42" PDP, thousands of electrode patterns should be placed on panel, where length, width, and height of each pattern m one meter, 50${\mu}{\textrm}{m}$, and 30${\mu}{\textrm}{m}$ respectively. And pitch between patterns is around 200${\mu}{\textrm}{m}$. Electrode patterns are frequently damaged during the production process, and thus might be broken. These breakage will result in open-circuited electrical characteristic of a pattern and/or open-circuited electrical characteristic between patterns. Therefore, inspection of pattern defects is the inevitable process to improve production yield rate of the panel. In this paper, we first review several types of PDP pattern defects which affects yield-rate of PDP. And, problems of inspecting such pattern defects by a typical inspection method is addressed. Then, a novel inspection method is proposed to overcome the difficulties, where some new components and the algorithm to detect the electrode defects are explored.ored.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.521-532
• /
• 2008

Supporting system design and construction management for the soft and hard rock layers with fractured zones are very important theme for the safety of temporary retaining wall, surrounding ground and structures in the urban deep excavation for the construction of subway, railway, building etc. The prevailing design method of supporting system for the soft and hard rock layers in the deep excavation is mostly carrying out by simplification without proper consideration for the characteristic of rock discontinuities. Therefore the behaviors of rock discontinuities and fractured zones dominate the whole safety of excavation work in the real construction stage, serious disaster due to the failure of temporary retaining wall can be induced in the case of developing large deformations in the ground and large axial forces in the supporting system. This paper introduces examples of deep excavation where the soft and hard rock layers with fractured zones were designed to be supported by shotcrete and rock bolt, deformations of corresponding ground and supporting systems in the construction period and increments of axial force in the upper earth anchors and strut due to the these deformations were investigated through detailed analysis of measurement data, the results were so used for the management of consecutive construction that led to the safe and economical completion of excavation work. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.272-281
• /
• 2016

From the year 2000 on, Seoul has aimed to be a fashion city, and thus has been supporting young designers through Seoul Fashion Creative Studio, Generation Next, Le Dome, Concept Korea, etc. London is famous for nurturing young designers through the joint help of government, schools and industries: Alexander McQueen, Christopher Kane and Peter Pilotto are successful cases. Therefore, this research aims to suggest a direction for policies aimed at helping young designers in the international market, on the basis of London's nurturing programs and ideas from a literature review and case studies. The results are below. Firstly, a step-by-step supporting program is recommended. Secondly, long-lasting, sustainable programs are considered essential to support designers after the end of their contracts. Thirdly, practical assistance is preferred to monetary funding in order to lighten the designers' lot and in the interests of transparency. The mentoring service should be strengthened for the designers to eventually become independent. The support should be tailor-made according to items. Fourthly, the supporting programs should be promoted. Fifthly, government and industries should collaborate. Sixthly, 'de minimis' against overlapped support should be legislated. For these, the change of supporting method can be helpful; an independent administrative organisation plans and collects funds from governments and companies. Through these programs and any subsequent studies, Seoul could become a fashion city where young designers play active roles at a global level.