• 대한통합의학회지
• /
• 제9권2호
• /
• pp.165-172
• /
• 2021

Purpose : This study was conducted to find out the effect on the activity of trunk and lower limbs muscles during abdominal drawing-in bridging exercises by verbal cue on the unstable supporting surface after pelvic rearward sloping taping for trunk stabilization movement. Methods : The study subjects were recruited by using the on-campus bulletin boards for healthy adult males and females in their 20s attending K University in Changwon-city, South Gyeongsang Province. The subjects were 30 persons (15 males and 15 females) who agreed to the study purpose in accordance with the criteria for selection and exclusion. Results : The results were obtained by measuring the muscle activity of the trunk and lower limbs during abdominal drawing-in bridging exercises by verbal cue on the unstable supporting surface after pelvic fixed tapping. The effects on erector spinae and hamstring muscles was statistically significantly lower (p<.05), it was confirmed that there were no statistically significant differences between the multifidus and gluteus maximus muscle (p>.05). Conclusion : Through this study, it was found that the excessive flexion of the waist was significantly reduced from erector spinalis and hamstring muscle after abdominal drawing-in bridging exercises by verbal cue on the unstable supporting surface after pelvic rearward sloping tapping compared to the general bridging exercises.

• 대한치과의사협회지
• /
• 제15권8호
• /
• pp.623-626
• /
• 1977

The author made two implant blades of gold alloy metal, and applied CEKA attachment to one blade. These two blades were implanted at the sockets resulting from removal of both 3rd premolar of experimental dog. Simple crown and tooth supporting denture was constructed on the implanted blades the author observed above mentioned procedures for 8 weeks. The obtained results were as follows; 1) There is no remarkable necrosis of supporting alveolar bone on both sides So, metal reaction was favourable. 2) Masticatory force which is loaded on each tooth was not effective on the alveolar bone.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.63-68
• /
• 2003

With the trend of large-sized ship in Korea, recently several hundreds of thousands of U-bolts for a year have been used as a pipe fastener In this paper, we have evaluated the strength for present U-bolt structure by pipe supporting conditions(deck, ceiling and wall mounting type) For this purpose, the equivalent and bending stresses have been calculated by linear elastic analysis using the finite element program ABAQUS. At the same time, a variety of load conditions such as design pressure, weight effect and acceleration are also considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.71-73
• /
• 2004

Recently many peoples served multimedia data from Internet. But characteristic of multimedia-object about that effect on weight and transport-time causes Streaming Application is restricted to high-quality-service. This research propose the Quality-of-service(QoS) supporting for Home Gateway that behaving Routing and media platform equipment, using CBQ Scheduling scheme. The QoS Supporting for Multimeda Service that using general Rouging policy is difficult because media platform locate in Home Gateway. Therefore this research propose Routing mechanism to QoS support of media platform located in Gateway using TCP based CBQ Control.

• 대한치과보철학회지
• /
• 제40권1호
• /
• pp.53-67
• /
• 2002

This study was aimed to analyze the stress distribution of implant and supporting tissue in single tooth implant restoration using Branemark $system^{(R)}$(Nobel Biocare, Gothenberg, Sweden) and Bicon system(Bicon Dental Implants, Boston, MA). Two dimensional finite element analysis model was made at mandibular first premolar area As a crown materials porcelain, ceromer, ADA type III gold alloy were used. Tests have been performed at 25Kgf vertical load on central fossa of crown portion and at 10Kgf load with $45^{\circ}$ lateral direction on cusp inclination. The displacement and stresses of implant and supporting structures were analyzed to investigate the influence of the crown material and the type of implant systems by finite element analysis. The results were obtained as follows : 1. The type of crown material influenced the stress distribution of superstructure, but did not influence that of the supporting alveolar bone. 2. The stress distribution of ceromer and type III gold alloy and porcelain is similar. 3. Stress under lateral load was about twice higher than that of vertical load in all occlusal restorative materials. 4. In Bicon system, stress concentration is similar in supporting bone area but CerOne system generated about 1.5times eater stress more in superstructure material. 5. In Branemark models, if severe occlusal overload is loaded in superstvucture. gold screw or abutment will be fractured or loosened to buffer the occlusal overload but in Bicon models such buffering effect is not expected, so in Bicon model, load can be concentrated in alveolar bone area.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.143-149
• /
• 2016

Purpose: The purpose of this study is to evaluate the effect of two different oblique mechanical loading to occlusal surfaces of cement retained implant on the stress distributions in surrounding bone, using 3-dimensional finite element method. Methods: A 3-dimensional finite element model of a cement retained implant composed of three unit implants, simplified ceramic crown and supporting bone was developed according to the design of ement retained implant for this study. two kinds of surface distributed oblique loads(100 N) are applied to following occlusal surfaces in the single crowns; 1) oblique load on 2 occlusal points(50N for each buccal cusp, 2 buccal cusps exist), 2) oblique load on 4 occlusal points(25N for each buccal and lingual cusp, 2 buccal and 2 lingual cusps exist) Results: The results of the comparison of the stress distributions on surrounding bone are as follows. In the condition of oblique load on 2 occlusal points, VMS was 741.3 Mpa in the M1(Ø$4.0{\times}13mm$) model and 251.2 Mpa in the M2(Ø$5.0{\times}13mm$) model. It means the stress on the supporting bone is decreased. The results of oblique load on 4 occlusal points are similar to this one. Conclusion: Increasing the diameter of the implant fixture is helpful to distribute the stress on the supporting bone. Also, to obtain the structural stability of the supporting bone, it is effective to distribute the load evenly on the occlusal surface of crown in producing single crown implant.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.407-424
• /
• 2014

Purpose: The purpose of this study was to propose supply chain management efficiency by analyzing moderating effect on the training support project in small and midium-sized enterprise. Methods: The collected data through the survey were analyzed using multi?regression analysis. The measurement tools used for this study were divided into three dimensions such as personal characteristics, supportive environment and training effect. Results: The results of this study are as follows; first, it was found that the effects of personal characteristics and supportive environment were significant on training effect. Second, significant differences were found between supply chain management active group and inactive group. Third, moderating effect of supply chain manage efficiency was found between variables. Conclusion: SME supporting project in training program needs supply chain management efficiency for training effect. Supply chain management needs to be promoted in SMEs not only for performance but also for their workplace learning and learning culture.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.683-690
• /
• 2010

Renewable and unutilized energy (biogas power generation, wind power, solar, small hydro-power, sewage heat source, etc.) seems to be suitable to install for the sewage treatment facilities. There are 357 sewage treatment plants in 2007. 17 plants among these have been operating for self-supporting energy by using solar power, small hydro-power and biogas in 2008. Newly built sewage treatment plant of 96,000 $m^3$/day for a newtown is expected to get up to energy consumption of 10 GWh/yr. If solar energy, small hydro-power and biogas-equipments were applied to the new treatment plant, self-supporting energy of the new sewage treatment plant will get up to 56.1%. As a results, about 2,379ton $CO_2$/yr $CO_2$ emission reduction can be expected by using renewable energy. These efforts for self-supporting energy will lead sewage treatment plant to new energy recycle center.

• 대한치과기공학회지
• /
• 제29권1호
• /
• pp.93-101
• /
• 2007

The purpose of this study is to evaluate the effect of three different oblique mechanical loading to occlusal surfaces of posterior implant partial dentures on the stress distributions in surrounding bone, using 3-dimensional finite element method. A 3-dimensional finite element model of a posterior implant partial dentures composed of three unit implants, simplified 3 gold alloy crown and supporting bone was developed according to the design of AVANA self tapping implant for this study. Three kinds of surface distributed oblique loads(300 N) are applied to following occlusal surfaces in the three crowns; 1) All occlusal surfaces in the three crown(load of 300 N was shared to three crown), 2) Occlusal surface of centered crown (load of 300 N was applied to a centered crown), 3) Occlusal surface of proximal crown(load of 300 N was applied to a distal proximal crown). In the results, 141 MPa of maximum von Mises stress was calculated at third loading condition and 98 MPa of minimum von Mises stress was calculated at first loading condition. From the results, location and type of occlusive loading conditions are important for the safety of supporting bone.

• 한국초등과학교육학회지:초등과학교육
• /
• 제39권2호
• /
• pp.296-305
• /
• 2020

The purpose of this study was to analyse the effects of the SW-STEAM program by utilizing software supporting the creation of VR for elementary science class. Two classes of 5th grade were selected, and were engaged in different teaching and learning methods during 12 class hours. The experimental group which is consisted of 20 students participated in the SW-STEAM program by utilizing software supporting the creation of VR, the comparative group which comprised 19 students was thaught by using a traditional instruction. Teaching unit was 'the solar system and stars' in 5th grade science text book. The results of this study were as follows. The SW-STEAM program by utilizing software the creation of VR had a positive effect on elementary school students' creative problem solving ability, scientific interest, science achievement. Therefore, the SW-STEAM program by utilizing software supporting the creation of VR could be meaningful works to encourage students' creative problem solving ability, scientific interest, science achievement, and this study will help elementary teachers teach 'the solar system and stars' in 5th grade science text book more interesting.