• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.27-31
• /
• 2018

The People have a bad perception about diesel vehicle because of serious air pollution, increase fine dust and global vehicle company's diesel gate. Starting the project in 2005, Ministry of Environment has been supporting that is exhaust gas reduction devices (DPF) on diesel vehicles in the metropolitan area. During the period of 2017.01.01 to 2017.12.31, 10,030 diesel vehicles installed exhaust gas reduction devices (DPF). Among them, 9,921 diesel vehicles that they have sufficient data for analysis were analyzed amount of particulate matter reduction before and after exhaust gas reduction devices (DPF) was installed. Opacity smoke meter measures the concentration of particulate matter. So concentration of particulate matter was converted into a mass unit, and then calculated the total amount of reduced particulate matter. It was estimated that social benefits is costs required to remove it from the total amount of particulate matter.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.5
• /
• pp.431-439
• /
• 2017

Since the power transmission line(PTL) passes through the high mountain and heavy snowfall region, it is necessary to keep the stability of the PTL. In this study, PTL is modeled as a mass-spring-damper system by using RecurDyn. The lumped mass model is verified by calculated from the simulation comparing the deflection analysis according to the sag and tension. In order to analyze the dynamic behavior of PTL, a damping coefficient for a multi-body model is derived by using the free vibration test and Rayleigh damping theory. Sleet jump simulation according to the region is performed. The maximum jump height, icing sag and amount of jump are confirmed. Also, the amount of jump and the reaction force at the supporting point according to the tension and load of ice are analyzed, respectively. As a result, it is noted that the amount of jump and reaction force are influenced more by the load of ice than by the tension of PTL.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.145-151
• /
• 2006

Wheel bearing unit has been exclusively applied to car wheel supporting device. The seal for wheel bearing is required to have both high sealing effects and low reaction forces because wheel bearing are operated on adverse environmental conditions such as mud and splash water. High sealing effects are for the protection of bearing ball wear from dust influx. In order to ensure high sealing effects, it is a easiest way to increase contact force which are affected by geometric characteristics, material properties and interferences between seal and inner bearing but induces higher wear phenomena. Interferences in all variables are most important factor to determine the performance of wheel bearing. In this study, optimization of interference amount was performed with finite element analysis with commercial code ABAQUS. For the sake of finite element analysis, tensile tests of rubber material were conducted and governing equation of nonlinear behavior was achieved. Hock-up bearing was manufactured with optimized interference amount. Results of torque and mud spray tests using this bearing unit are performed. Less torque and moisture influx of bearing with optimized interference amount is evidence to validity of this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1142-1148
• /
• 2005

We proposes an algorithm of measuring computation loads to distribute workload of clients. The key of the algorithm is to transfer a suitable amount of processing demand from senders to receivers in relocating intrinsically. This amount is determined dynamically during sender-receiver negotiations. Factors considered when this amount is determined include processing speeds of different nodes, the current load state of both sender and receiver, and the processing demands of tasks eligible for relocation. We also propose a load state measurement scheme which is designed particularly for heterogeneous systems. Based on this analysis, we design new algorithm for supporting heterogeneous distributed web server system, and compare their performance against other existing algorithms. We show that the new algorithm improve the performance of CPU utilization and response time.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.287-292
• /
• 2004

BOCC(Brand's Offline Cash with a Counter) is useful in mobile environments, but it has the possibility of attacking amount data in a smart card. To insert the upper & lower limitation of amount into a token data decreases the level of risk. If upper and lower values are same, it means a fixed amount token. Since refund can more often happen in on-line commerce, refundability is added. BOCC is based on Discrete Logarithm Problem, needs exponential computations. But mobile terminals like cell phones have low computational power. As a result, ECC is used to Improve the performance supporting same security level.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2006

One of the critical issues in the coating specification is the allowable limit of surface contaminant(s) - such as soluble salt(s), grit dust, and rust - after grit blasting. Yet, there is no universally accepted data supporting the relationship between the long-term coating performance and the amount of various surface contaminants allowed after grit blasting. In this study, it was attempted to prepare epoxy coatings applied on grit-blasted steel substrate dosed with controlled amount of surface contaminants - such as soluble salt(s), grit dust, and rust. Then, coating samples were subjected to 4,200 hours of cyclic test(NORSOK M-501), which were then evaluated in terms of resistance to rust creepage, blistering, chalking, rusting, cracking and adhesion strength. Additional investigations on the possible damage at the paint/steel interface were carried out using an Electrochemical Impedance Spectroscopy(EIS) and observations of under-film-corrosion. Test results suggested that the current industrial specifications were well matched with the allowable degree of rust, whereas the allowable amount of soluble salt and grit dust after grit blasting showed a certain deviation from the specifications currently employed for fabrication of marine vessels and offshore facilities.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.2
• /
• pp.19-43
• /
• 2004

This study was motivated by a practical need for estimating the macroeconomic effect of government IT Promotion investment, specifically for micro and small firms. Small firms have been in a disadvantageous position to adopt and utilize new IT compared with medium or large-sized firms. Small firms don't have enough resource to acquire IT in general, therefore private IT companies don't have much incentive to develop IT services and products for small firms. Lack of feasible IT solutions for small firms again restricted active IT adoption of small firms. Government recognized the vicious cycle, therefore decided to promote private IT companies to develop IT services and products for small firms's. Our main concern was to identify a relevant government supporting Policy, especially in the amount and the period. To do this, we first constructed a system dynamics simulation model to Investigate important factors and causal relationships among them. Simulation results showed 2.19% of GDP contribution and 0.16% of employment contribution in max from small firms' IT adoption. Also we could find that investing proper amount for a short period would be for better than maintaining Investing small amount for a long period.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.129-134
• /
• 2006

Recently, spillways are need to control stable water level for supporting main dams because of floods by unusual change of weather such as Typhoon Rusa. This study has been focused on the amount of leakage through the rock mass distributed fractures and joints under the opened emergency spillway. It is very important to evaluate the amount of leakage as these affect stability of spillway by interaction between effective stress and pore pressure. The commercial program MAFIC has been used for analyzing groundwater flow in fractured rock mass. The results showed that the values of range, average and deviation of leakage were 2.85∼3.79×10-1, 3.32×10-1 and 1.70×10-2 m3/day/m2 respectively. Secondary, we have estimated the effect of grouting after the transmissivity(Tf) of joint 1 as main pathway of leakage known from above results was changed from 1.78×10-7 to 1.59×10-9 m2/s. The results showed that the values of range, average and deviation of leakage were 7.80×10-4∼1.53×10-3, 1.18×10-3 and 1.32×10-4 m3/day/m2 respectively. As the result, the amount of leakage after grouting has been decreased by a ratio of 1 to 277.

• The Korean Journal of Community Living Science
• /
• v.19 no.2
• /
• pp.245-265
• /
• 2008

The Lifelong Learning City Project has made quantitative expansion as well as qualitative growth since 2001 but the project has been criticized by academic scholars and field practitioners. The Lifelong Learning City Project is a national policy project which has been promoted by the Ministry of Education and Human Resources Development and should be required to make production profits proportional to the amount of public finance. The Lifelong Learning City Project is a community development project intended to promote growth and progress by supporting the community in lifelong learning endeavors. Therefore, the community development theory could offer guidelines to the Lifelong Learning City Project. Based on this assumption, this study intends to investigate the Lifelong Learning City Project at the national, city, and county levels using the community development theory. The improvement methods of the Lifelong Learning City Project are role allotment between national and wide level projects supporting organizations, and the establishment of a system and a long term project policy. In addition, the project is to have a more systematic performance. It is to enhance opportunities for community members' participation, and practice in planning, performance of learning, and the proper performance in regard to the community conditions and specificity. The most important goal of the Lifelong Learning City Project is to support the empowerment of community members by making opportunity planning, practicing and sharing lifelong learning more accessible.

• Korean Journal of Adult Nursing
• /
• v.20 no.3
• /
• pp.418-430
• /
• 2008

Purpose: This study was to examine the effects of Seogeum therapy for middle-aged abdominal obese women. Methods: Seogeum therapy combined cupping, stepping on ion aluminum board, adhering to Seoam moxibustion and Seoam pellet. The subjects consisted of 30 middle-aged abdominal obese women between 40 and 59 years of age: fifteen were assigned to experimental group, fifteen to control group. The data collection and treatments were performed from June to October, 2007. The subjects of experimental group participated in Seogeum therapy for 5 times per week during 8 weeks. The data were analyzed with Chi-square test, Wilcoxon signed rank test and Wilcoxon rank-sum test with SPSS/Window 12.0 program. Results: Seogeum therapy experimental group showed significant difference in change of general obesity indexes(body weight, body fat amount, body fat ratio, BMI) than control group supporting hypothesis 1. Experimental group showed significant difference in change of abdominal obesity indexes(abdominal fat ratio, waist circumference, hip circumference) than control group supporting hypothesis 2. Conclusion: Obesity management of Seogeum therapy had a positive effect for middle-aged obese women. Therefore, it is concluded that the obesity management of Seogeum therapy can be applied as a nursing intervention to decrease the obesity for middle-aged women.