• Bulletin of the Korean Chemical Society
• /
• 제8권3호
• /
• pp.133-137
• /
• 1987

Polysiloxane SE-54 liquid phase was immobilized on the support surface as coated in thin film via in-situ cross-linking. The cross-linking between liquid molecules was initiated by dicumylperoxide. Among the supports investigated, only Chromosorb W provided the cross-linkable surface. The optimal in-situ cross-linking was achieved when Chromosorb W was coated with 5% (w/w) SE-54 and cross-linked with 1% (w/w) dicumylperoxide. The cross-linked support was useful for the trace analysis as well as for the trace enrichment.

• 한국전문물리치료학회지
• /
• 제17권4호
• /
• pp.16-25
• /
• 2010

The aim of this study was to determine the muscle activity of the abdominalis and erector spinae during bridging and unilateral bridging exercises on the firm surface, the sir-fit, and the foam roll. Eighteen healthy young subjects were recruited for this study. Surface electromyographic (EMG) activities were recorded from the both sides of the rectus abdominalis, external obliques, internal obliques, and erector spinae muscles during bridging and unilateral bridging-exercises. A one-way repeated analysis of variance was used to compare the EMG activity of each muscle according to the support surface condition. Differences in the EMG activities between the bridging and unilateral bridging exercises, and between the right and left side were assessed using a paired t-test. The study showed that the EMG activities of all of the muscles were significantly higher when the bridging exercise was performed using the foam roll or sit-fit than on the firm surface. The EMG activities of the right rectus abdominis, right external obliques, the right internal oblique, and both erector spinae were significantly higher during unilateral bridging ex exercise using the foam roll or the sit-fit than on the firm surface. The EMG activities of all of the muscles were significantly higher during the unilateral bridging exercise than during the bridging exercise. Based on these finding, performing the unilateral bridging exercise using the sit-fit or the foam roll is a useful method for facilitating trunk muscle strength and lumbar stability.

• 생물환경조절학회지
• /
• 제17권3호
• /
• pp.188-196
• /
• 2008

본 연구는 소형 파이프하우스 설계시 구조계산에 필요한 지점조건을 구명하기 위하여 실물크기의 파이프 하우스에 환산된 적설하중 및 풍하중을 재하하여 온실의 붕괴양상과 변위 및 변형도를 측정하였으며, 측정값을 여러 가지 지점조건에 대해 구조해석한 값과 비교 분석하였다. 온실에 작용하는 적설 및 풍하중의 등분포 하중을 집중하중으로 환산할 때 환산된 집중하중의 개수별로 하중효과를 비교 분석한 결과, 적설하중의 경우 최소 2개 이상의 집중하중으로 환산하는 것이, 풍 하중의 경우 각각의 등분포된 수압면의 하중을 1개씩의 집중하중으로 환산하는 것이 등분포하중과 유사한 하중효과가 나타나는 것으로 분석되었다. 변형도의 변화를 분석한 결과 적설하중 작용시에는 예측된 바와 같이 처마부위에서 붕괴된 것으로 나타났으며, 풍하중 작용시에는 풍상측의 처마와 지점부위의 변형이 가장 크게 발생하였고 다음으로 풍하측의 처마와 곡부의 변형이 크게 발생하였으며, 가장 큰 변형을 나타낸 처마가 위험부위로 판단되었다. 응력과 변위에 따른 지점조건을 분석한 결과 지점조건에 따른 변위의 크기는 변위방향과 모델종류에 관계없이 모두 지면고정 <지하고정<지면힌지<지하힌지 순으로 나타났으며, 별도의 기초 없이 서까래를 땅속에 바로 매입하여 설치하는 소형 파이프 하우스의 구조설계시 지점조건을 매입깊이에서의 지하고정으로 하는 것이 바람직할 것으로 판단 되었다.

• The Journal of Korean Physical Therapy
• /
• 제24권5호
• /
• pp.300-305
• /
• 2012

Purpose: This study examined the muscle activity of the trunk muscles during weight shifting exercises on a stable and unstable surface. Methods: Ten healthy young subjects (4 males, 6 females) with no medical history of lower-extremity or lumbar spine disease were enrolled in this study. The muscle activity was recorded using surface electromyography (EMG) electrodes from the both sides of the external obliques and erector spinae muscles. Results: The EMG activities of the both rectus abdominalis, both external obliques and erector spinae muscles were significantly higher when the weight shifting exercise was performed on a firm surface than when a balance pad with a balance ball was used. In weight shifting exercises, the EMG activity of the contralateral external obliques and erector spinae muscles was significantly higher than that of the ipsilateral external obliques and erector spinae muscles under all three support surface conditions. Conclusion: Performing weight shifting exercise using an unstable surface is a useful method for facilitating the trunk-muscle strength and trunk stability.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.733-737
• /
• 1998

Using an atom superposition and electron delocalization molecular orbital (ASED-MO) method, we have compared adsorption properties of adsorbates on the Pt(Ill) surface with the Pt(lll)/γ-Al203 surface in the ethylene hydrogenation reaction. In two-layer thick model systems, the calculated activation energy of the hydrogenation by the surface platinum hydride is equal to the energy by the hydride over supported platinum/γ-alumina. The transition structure on platinum is very close to the structure on the supported platinum/γ-alumina surface. Hydrogenation by the surface hydride on platinum can take place easily because the activation energy is about 0.5 eV less than hydrogenation by ethylidene. On supported platinum/,y-alumina the activation energy of the hydride mechanism is about 0.61 eV less than that of ethylidene mechanism. In one-layer thick model systems, the activation energy of hydrogenation by ethylidene is about 0.13 eV less than the activation energy of hydride reaction. The calculated activation energy by the hydride over the supported platinum y-alumina is 0. 24 eV higher than the platinum surface. We have found from this result that the catalytic properties of one-layer thick model systems have been influenced by the support but the two-layer thick model systems have not been influenced by the support.

• 천문학회지
• /
• 제43권3호
• /
• pp.55-64
• /
• 2010

We investigate how plasma structures in the solar chromosphere and corona can extend to altitudes much above hydrostatic scale heights from the solar surface even under the force of gravity. Using a simple modified form of equation of motion in the vertical direction, we argue that there are two extreme ways of non-hydrostatic support: dynamical support and magnetic support. If the vertical acceleration is downward and its magnitude is a significant fraction of gravitational acceleration, non-hydrostatic support is dynamical in nature. Otherwise non-hydrostatic support is static, and magnetic support by horizontal magnetic fields is the only other possibility. We describe what kind of observations are needed in the clarification of the nature of non-hydrostatic support. Observations available so far seem to indicate that spicules in the quiet regions and dynamic fibrils in active regions are dynamically supported whereas the general chromosphere as well as prorninences is magnetically supported. Moreover, it appears that magnetic support is required for plasma in some coronal loops as well. We suspect that the identification of a coronal loop with a simple magnetic flux tube might be wrong in this regard.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.20-33
• /
• 2010

The paper deals with strength design of a riser support installed on floating production storage and offloading (FPSO) vessel under various loading conditions - operation, extreme, damaged, one line failure case (OLFC) and installation. The design problem is formulated such that thickness sizing variables are determined by minimizing the weight of a riser support structure subject to stresses constraints. The initial design model is generated based on an actual FPSO riser support specification. The finite element analysis (FEA) is conducted using MSC/NASTRAN, and optimal solutions are obtained via moving least squares method (MLSM) in the context of response surface based approximate optimization. For the meta-modeling of inequality constraint functions of stresses, a constraint-feasible moving least squares method (CF-MLSM) is used in the present study. The method of CF-MLSM, compared to a conventional MLSM, has been shown to ensure the constraint feasibility in a case where the approximate optimization process is employed. The optimization results present improved design performances under various riser operating conditions.

• 한국치위생학회지
• /
• 제16권5호
• /
• pp.751-758
• /
• 2016

Objectives: The purpose of the study is to investigate the influence of emotional labor on job burnout in dental hygienists based on the moderating effect of employee support. Methods: A self-reported questionnaire by Likert 5 point scale was completed by 219 dental hygienists in Ulsan and Gyeongbuk from March 15 to April 9, 2016. The study instruments consisted of emotional labor, job burnout og Maslach Burnout Inventory, and employee support. Data were analyzed by descriptive analysis, Pearson's correlation, multiple regression analysis, and hierarchical regression analysis using SPSS 18.0 program. Results: Surface acting had a positive influence on achievement and negative influence on impersonal chemistry. Inner acting had a positive influence on emotional burnout and achievement. Employee support had a moderating effect on emotional labor and job burnout. Conclusions: The strategy of emotional labor management for dental hygienists is very important for job burnout solution.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.277-290
• /
• 2018

In this study, Pd-Ni-Ag alloy hydrogen separation membranes were fabricated by Pd/Ag/Pd/Ni/Pd multi-layer sputter deposition on the modified MIM(Metal Injection Molding)-PSS(Porous Stainless Steel) support and followed heat treatment. Nickel, used as an alloying element in Pd alloy membranes, is inexpensive and stable material in a hydrogen isotope environment at high temperature up to 1123 K. Hydrogen perm-selectivity of Pd-Ni-Ag alloy membranes is affected not only by composition of membrane films but also by other factors such as surface properties of PSS support, microstructure of membrane films and inter-diffused impurities from PSS support. In order to clarify the effect of surface Ni composition on hydrogen perm-selectivity of Pd-Ni-Ag alloy membranes, the other effects were significantly minimized by the formation of dense and homogeneous Pd-Ni-Ag alloy membranes. Hydrogen permeation test showed that hydrogen permeability decreased from $7.6{\times}10^{-09}$ to $1.02{\times}10^{-09}mol/m{\cdot}s{\cdot}Pa^{0.5}$ as Ni composition increased from 0 to 16 wt% and the selectivity for $H_2/N_2$ was infinite.