• 스트레스연구
• /
• 제26권4호
• /
• pp.340-349
• /
• 2018

본 연구의 목적은 콜센터 상담원의 감정노동과 소진의 관계에서 회복 탄력성과 사회적 지지의 조절효과를 확인하는 것이다. 콜센터 상담원을 대상으로 한 설문조사를 통해 총 444명의 자료를 수집하였으며, 감정노동이 소진을 예측하는지 확인하였고, 회복 탄력성과 사회적 지지의 조절효과를 탐색하였다. 연구 결과, 감정노동의 하위요인 중 내면 행위는 소진을 감소시켰고, 반대로 표면행위, 감정표현의 빈도, 다양성, 주의 정도는 소진을 증가시켰다. 조절변인인 회복 탄력성과 상사의 사회적 지지는 부분적으로 감정노동과 소진의 관계에서 완충효과가 나타났으나, 동료의 지지는 조절효과가 나타나지 않았다. 감정노동으로 야기되는 소진에 대한 예방 및 치료를 위해 본 연구에서 확인된 조절변인을 활용할 수 있을 것으로 기대된다.

• Journal of Electrochemical Science and Technology
• /
• 제1권2호
• /
• pp.117-120
• /
• 2010

Materials used as fuel cell electrode should be light, high conductive, high surface area for reaction, catalytic surface and uniformity of porous structure. Nickel is widely used in electrode materials because it itself has catalytic properties. When used as electrode materials, nickel of only a few im on the surface may be sufficient to conduct the catalytic role. To manufacture the nickel with porous structure, Electroless nickel plating on carbon fiber be conducted. Because electroless nickel plating is possible to do uniform coating on the surface of substrate with complex shape. Acidic bath and alkaline bathe were used in electroless nickel plating bath, and pH and temperature of bath were controlled. The rate of electroless plating in alkaline bath was faster than that in acidic bath. As increasing pH and temperature, the rate of electrolee plating was increased. The content of phosphorous in nickel deposit was higher in acidic bath than that in alkaline bath. As a result, the uniform nickel deposit on porous carbon fiber was conducted.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.45-61
• /
• 2005

Stance is defined as any state in which the total mass of the body is supported by the feet. In order to maintain stance, the sum of gravito-inertial forces acting on the body must be registered by equal and opposite forces at the region of contact between the organism and the support surface. Balance is controlled by applying forces to the surface of support so as to maintain the body's center of mass vertically above the feet. for a muIti-segment organism, there can be a variety of ways in which balance can be controlled, since movements of different body segments can have similar effects on the control of balance. In general, the organism tends to have a body configuration that is aligned with gravito-inertial force when there are no external forces acting on it. If any segments of the body are not aligned with gravito-inertial force vector, a torque on that segment would tend to move the body's center of mass. The maintenance of postural stability is accomplished in humans by a complex neural control system. This requires organizing integrating and acting upon visual, vestibular, and somatosensory input, providing orientation information to the postural control system. The information necessary to control and coordinate movement is provided by the visual sense of eye position with respect to the surrounding surface layout, the vestibular sense of head orientation in the gravito-inertial space, and the somatic sense of body segment position relative to one another and to the support surface. In this study, perception and action capability was examined from various points of view. The underlying assumption of the study was that the change of postural configuration could be effected by organism, environment and task goal.

• 한국결정성장학회지
• /
• 제32권1호
• /
• pp.33-39
• /
• 2022

3D 프린터 관련 특허가 만료되고 주요 기술이 공개되면서 3D 프린터 가격이 하락하면서 원하는 제품을 쉽게 찾을 수 있는 환경이 조성되고 있다. 특히 가장 저렴한 FDM(Fused Deposition Modeling) 3D 프린터가 다양한 분야에서 사용되고 있다. FDM 방식은 형상을 출력할 때 특정 조건이상에서는 지지대(Support)를 붙여야만 형상의 무너짐 없이 제작이 가능하다. 지지대를 달지 않고 형상을 출력할 때 특정 각도에서 발생하는 불규칙한 표면은 제품에 있어서는 불량이지만 예술과 공예적 측면에서는 또 다른 재미를 느낄 수 있는 요소로 활용될 수 있다고 사료된다. 본 논문에서는 이러한 불규칙한 표면을 얻기 위해 출력에 영향을 줄 수 있는 요인들을 제어하고 출력 각도만 변위요소로 실험하였다. 실험 결과 수직에서 62°~70°의 각도로 프린팅 시 필라멘트가 흘러내리지 않고 불규칙한 표면을 얻을 수 있었다. 또한 인위적으로 불규칙한 표면을 공예적인 제품에 적용해 보았다.

• 대한정형도수물리치료학회지
• /
• 제29권3호
• /
• pp.1-11
• /
• 2023

Background: The aim of this study was to compare the effects of squat training on an unstable support surface with different knee flexion angles on the balance ability of normal adults balance ability. Methods: 41 university students in their 20s attending N University in Cheonan, Chungcheongnam-do were divided into a 45-degree knee-bending squat training group and a 90-degree knee-bending squat training group. The groups trained on an unstable support surface 20 minutes per day, 3 times a week, for a total of 4 weeks. Results: Changes in static balance ability were not significant within and between the groups for both the sway distance and sway area in the eyes open and eyes closed states (p<.05). The changes in dynamic balance ability were significant in the forward, leftward, and rightward angles in both groups at the limit of stability (p<.05), but not significant in the backward angle (p>.05), and the comparison between groups was not significant (p>.05). Conclusion: No significant difference between static balance-related variables within and between the groups was found. Significant changes in dynamic balance-related variables within the groups were found but not between the groups. Therefore, in future studies, it is considered necessary to study various ages and differentiated intervention periods, such as young adults and the population of elderly people, with sufficient intervention periods to affect balance ability.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.83.2-83.2
• /
• 2011

In this study, we fabricated tubular ceramic support for segmented-in-series solid oxide fuel cell (SOFC) by using MAO(MgAl-stabilized ) as main material and activated carbon as pore former. Thermal expansion properties of ceramic support with different amounts of activated carbon were analyzed by using dilatometer to decide a suitable sintering temperature. The tubular ceramic supports with different amounts of activated carbon (15, 20, 30wt.%) were fabricated by the extrusion technique. After sintering at $1400^{\circ}C$ for 2h, cross section and surface morphology of tubular ceramic support were analyzed by using SEM image. Also, the porosity, mechanical property, gas permeability of tubular ceramic supports was measured. Based on these results, we established the suitable fabrication technique of tubular ceramic support for segmented-in-series SOFC.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.59-70
• /
• 2017

The purpose of this study is to review the relationship between emotional labor and job burnout, and the moderating effects of peer and superior support in social welfare agency. In order to verify and achieve the purposes mentioned above, questionnaire data were gathered and analysed from 349 employees of social welfare agency in western Kangwon-do province. Empirical survey's findings are as follows; First, deep action(DA) appeared to be negatively related with depersonalization and reduced accomplishment. Second, surface action(SA) appeared to be positively related with all job burnout factors(emotional exhaustion, depersonalization and reduced accomplishment). Third, peer support moderated negatively the relationship between emotional labor(DA, SA) and emotional exhaustion. Fourth, superior support moderated negatively the relationship between deep action(DA) and emotional exhaustion.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.165-170
• /
• 1999

Palladium membranes have high selectivity of separation and removal of hydrogen to chemical process at high temperature. For the development of hydrogen permeable membrane, palladium was deposited on porous stainless steel support by electroless plating method. In this work, the activation effect on the surface of stainless steel support has been investigated for the effective palladium plating. The morphology and microstructure were characterized by SEM and the composition was analyzed by EDX. It is found that the composition of deposited nuclei on the stainless steel support was changed in accordance with activation cycles. It is also observed that Sn-enriched nuclei has been changed to Pd-enriched nuclei over the fifteenth activation. The uniform deposition of the dense palladium layer on porous stainless steel support has been performing with Sn-enriched nuclei and comparing with Pd-enriched nuclei.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.53-58
• /
• 2006

A powder of destructive adsorbent was prepared by impregnating Mn and Cu on the surface of amorphous aluminosilicate. It catalytically dimerized tert-butyl mercaptan into di-tert-butyl disulfide on its surface. Turnover of the dimerization was strongly dependent on the surface morphology of the adsorbent, which could be altered by modification of aluminosilicate support. During the process of impregnation, which involved heat treatment at 500 ${^{\circ}C}$, the shape of the pore was preserved, though large fraction of micropores were eliminated. The reactive sites on the surface were poisoned as dimerization products strongly adhered on them. Therefore, high surface area was not always desirable. When the surface was heavily populated with “inkbottled” pores with a narrow entrance in uniform size, heavy poisoning of the reactive sites turned the destructive adsorbents almost useless.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.225-230
• /
• 2003

The moonpool is a vertical well ill floating barge, frequently found in drilling ships and in diving support vessel. In this paper, numerical simulation of two-dimensional flow in moonpool situated in moving vessel is carried out using the commercial software FLUENT. The focus of the simulation is to understand drag generation mechanics of moonpool flow. To examine the effect of free surface motion on the drag, simulations are also carried out by employing two different boundary conditions at the free surface.