• 제목/요약/키워드: Support surface

검색결과 1,345건 처리시간 0.026초

일차파괴된 암반사면의 전단강도 및 보강설계법 고찰 (A study on the determination of shear strength and the support design of pre-failed rock slope)

  • 조태진;김영호
    • 터널과지하공간
    • /
    • 제5권2호
    • /
    • pp.104-113
    • /
    • 1995
  • Shear strength of the discontinuity on which the pre-failure of rock slope was occurred during surface excavation was measured through the direct shear test using core samples obtained in-situ. Internal friction angle was increased as the roughness of discontinuity surface(JRC) was increased. Results of the tilt test using core samples of higher JRC also showed very similar trend as those of the direct shear test. When the samples replicated from natural cores were used int he tilt test, results of friction angles showed almost perfect continuation of the residual friction angles from the direct shear test. However, when the gouge material existed in the discontinuity the internal friction angle strongly depended upon the rate of filling thickness to the height of asperity irrespective of the JRC. Based on the results of both direct shear test and tilt test internal friction angle and cohesion of discontinuity, which reflect the in-situ conditions fo pre-sliding failure and also can be used for the optimum design of support system, were assessed. Two kinds of support measures which were expected to increase the stability of rock slope were considered; lowering of slope face angle and installation of rock cable. But, it was found that the first method might lead to more unstable conditions of rock slope when the cohesion of discontinuity plane was negligibly low and in that case the support systems of any kind which could exert actual resisting force were needed to ensure the permanent stability of rock slope.

  • PDF

The Relationship between Counselor's Emotional Labor and Psychological exhaustion : The Moderating Effects of Social Support

  • Kim, Ahsung;Im, Geumok;Jung, Huigon
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권9호
    • /
    • pp.171-177
    • /
    • 2017
  • The purpose of this study is to suggest the implications of social welfare workers' understanding of emotional labor and prevention of psychological exhaustion. In order to achieve this goal, I analyzed the effects of the levels of surface acting and deep acting, which are components of emotional labor in social welfare workers in social welfare center, on emotional exhaustion, depersonalization, and lack of sense of personal accomplishment which are components of psychological exhaustion. And I empirically analyzed how emotional labor affects psychological exhaustion, when superior support and fellow support as components of social support play a role as moderating variables. Empirical results show that emotional labor affects psychological exhaustion and social support plays a moderating role. Based on these results, theoretical and policy implications and future research directions are presented.

담체 모양변화에 따른 유기물 처리 성능 고찰 (Performance of Organic Treatment with Shape Modify of Ceramic Support Carrier)

  • 박영식;안갑환
    • 한국환경보건학회지
    • /
    • 제27권3호
    • /
    • pp.27-34
    • /
    • 2001
  • This paper discussed the shape effect of ceramic support carrier in order to facilitate biomass immobilization. The shape of ceramic support carrier was modified hollow pipe type into hollow gear type. After seeding, microorganisms were attached in crevices where protection from shear forces or surfaces where easy to contact with support carrier surface. In case of hollow gear type carrier, initial attachment rate was faster than that of hollow pipe type and obtained thick biofilm. Synthetic wastewater(COD:75~880 mg/L, organic loading rate:0.36~4.22 kgCOD/㎥.d) was treated aerobic fixed bed biofilm reactor where 100% of the volume was filled with the ceramic carrier. COD removal efficiency of reactor filled with gear type support carrier was a little high withing 70 days, and then showed similar removal efficiency. It was found that highly loaded operation with up to 4.22 kgCOD/㎥.d was possible in both reactor. Total biomass amounts of pipe type was higher than gear type, however, attached biomass of gear type was higher than that of pipe type.

  • PDF

쇄석 담체와 펄라이트로 코팅된 쇄석 담체의 성능 비교 (A Comparison on Performance of Rubble Support Media coated with Perlite and non-coated Media)

  • 박영식;안갑환
    • 한국환경보건학회지
    • /
    • 제26권3호
    • /
    • pp.76-80
    • /
    • 2000
  • The purpose of this study is to compare the performance of rubble support media coated perlite and non-coated media. As rubble was coated perlite, the porocity of reactor was increased 5.6%, whereas packing weight was decreased 17.6%. When rubble was coated perlite, microorganisms were attached on the surface of support media after 2 hours. TCOD removal efficiency of the reactor packed with rubble support media coated perlite was higher 4~9% than that of rubble. The end of experiment, MLVSS of rubble support media and rubble coated perlite was 1858.8mg/ι, 2785.9mg/ι, respectively.

  • PDF

사회복지시설 사회복지사의 감정노동이 직무성과에 미치는 영향 : 상사와 동료지지 매개 효과 중심으로 (Effects of Emotional Labor on Job Performance of Social Welfare Workers in Social Welfare Facilities : Focused on the Mediation Effect of Superior & Colleague Support)

  • 김수목;김상철
    • 한국콘텐츠학회논문지
    • /
    • 제21권2호
    • /
    • pp.330-342
    • /
    • 2021
  • 본 연구는 사회복지시설에 근무하는 사회복지사의 감정노동과 직무성과의 관계에서 상사와 동료지지의 매개효과를 규명하는 것을 목적으로 설정하였다. 연구대상은 수도권 소재 사회복지시설에 근무하는 사회복지사 445명을 선정하였다. 수집한 자료는 SPSS V22.0을 사용하여 분석한 결과는 다음과 같다. 첫째, 사회복지사의 감정노동에서 표면행동은 직무성과에 부적 영향, 내면행동은 정적인 영향을 직무성과에 미치는 것으로 나타났다. 둘째, 사회복지사의 감정노동에서 표면행동은 상사와 동료지지에 정적 영향, 내면행동은 부적인 영향을 상사와 동료지지에 미치는 것으로 나타났다. 셋째, 사회복지사의 상사와 동료지지가 직무성과에 정적인 영향을 미치는 것으로 나타났다. 넷째, 사회복지사의 표면행동과 직무성과의 관계에서 상사와 동료지지는 부적인 매개 영향을 미치며, 내면행동과 직무성과의 관계에서 상사와 동료지지는 매개 영향을 미치지 않는 것을 밝혔다.

현대건축에서 나타나는 복합적 외피의 표현적 특성에 관한 연구 - 헤르조그 & 드 뮤론의 건축물을 중심으로 - (The Study on the Expressive Characteristics of Complex Surface in Contemporary Architecture - focused on of Herzog & de Meuron's Architecture -)

  • 김정곤
    • 한국실내디자인학회논문집
    • /
    • 제21권5호
    • /
    • pp.3-11
    • /
    • 2012
  • The first visual contact in architecture happens in surface, and it could be significant object as well as the starting point to recognize the essence and perceive the buildings. Architecture surface could not get out of the restriction of structures and materials that support buildings for a long time in the past. Architecture surface in the past should fulfill the structural role to form are appearance of buildings and support buildings at the same time, so it was difficult to get out of logic for material and thickness of walls, arrangements and sizes of windows. However, since the modern age, architecture surface came to be freer according to the development of building technology, and development of technology changes shows tendencies to express role of new design factor as an architectural element emphasized expression and autonomy,s which was escaped from the subordinate relationship that the surface of building must do the structural function. In this study, it would be examined the expressive characteristics of various epidermis that are expressed in architecture of Herzog & de Meuron since the end of 20thcentury focused on comprehended and analyzed results of changes and characteristics of contemporary society. Through this, it would be comprehended the epidermis of architecture that has particular character expressed in modern buildings of Herzog & de Meuron, and it would be composed a certain linkage between this and characteristics of contemporary society and it would be investigated that the establishing process of inner spaces. Identification through case analysis for this would perform a role of catalyst for the new possibility and development of contemporary architecture's surface expression in the future.

  • PDF

다구찌 실험 계획법을 활용한 평삭 가공에서의 표면 거칠기에 대한 절삭조건 영향 분석 (Effects of Cutting Parameters on Surface Roughness in Planing Using Taguchi Method)

  • 서동현;권예필;김영재;최환진;전은채
    • 한국기계가공학회지
    • /
    • 제20권8호
    • /
    • pp.93-98
    • /
    • 2021
  • The complex effects of the machining parameters make it is difficult to control and predict surface roughness. The theoretical surface roughness observed during mechanical machining with a round tool is determined by the tool radius and pitch. However, it was revealed that other parameters, such as the depth of cut and cutting speed, also affect surface roughness. This study adapted the Taguchi method, which can analyze the effects of cutting parameters quantitatively with an efficient number of experiments, to optimize the parameters for better surface roughness. Experiments were designed based on an orthogonal array, and the quantitative effects on the surface roughness were analyzed using the S/N ratio. The surface roughness was affected by all parameters, especially the tool radius. The optimum cutting parameter values obtained in this study showed better surface roughness than the other combinations of the parameters.

지지면에 따른 마비 측 한 발 서기 훈련이 만성 편마비 환자의 보행속도와 균형에 미치는 효과 (Effect of Single Leg Stance Training According to Different Support Surfaces on Walking Speed and Balance in Patients with Chronic Hemiplegia)

  • 김명철;이홍준
    • 대한통합의학회지
    • /
    • 제8권3호
    • /
    • pp.143-151
    • /
    • 2020
  • Purpose: This study aimed to investigate the effect of single-leg stance training according to different support surfaces on walking speed and balance in patients with chronic hemiplegia. Methods: Twenty-two patients with chronic stroke were randomly categorized into an experimental group (11 patients) and a control group (11 patients). In the experimental group, single-leg stance training was performed on an unstable surface after 50 min of general physical therapy. In the control group, single-leg stance training was performed on a stable surface after 50 min of general physical therapy. All participants performed five sets of single-leg stance exercises per minute and rested for 3 min. The intervention was performed 5 times a week for 4 weeks, and each patient was evaluated using the Berg Balance Scale (BBS), Fugl-Meyer Assessment Scale (FMA), and difference in walking speed between the first and last day of the intervention. Results: Compared to baseline measurements, both study groups showed significant increases in FMA, BBS, and walking speed (p<.05) after the intervention. However, there was no statistically significant difference (p>.05) between the experimental and control groups. However, in the experimental group, the increases in FMA, BBS, and walking speed were 3.36 %, 9.50 %, and 7.71 %, respectively. In the control group, the increases in FMA, BBS, and walking speed were 2.39 %, 6.65 %, and 7.64 %. Conclusion: Single-leg stance training on different support surfaces could help improve walking ability and balance in patients with chronic hemiplegia.

Experimental and numerical study on the stability of slurry shield tunneling in circular-gravel layer with different cover-span ratios

  • Liu, Xinrong;Liu, Dongshuang;Xiong, Fei;Han, Yafeng;Liu, Ronghan;Meng, Qingjun;Zhong, Zuliang;Chen, Qiang;Weng, Chengxian;Liu, Wenwu
    • Geomechanics and Engineering
    • /
    • 제28권3호
    • /
    • pp.265-281
    • /
    • 2022
  • A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

몸통 안정화 근육과 보행요소의 상관관계 (Correlation between Trunk Stabilization Muscle Activation and Gait Parameters)

  • 채정병;정주현
    • PNF and Movement
    • /
    • 제17권1호
    • /
    • pp.111-118
    • /
    • 2019
  • Purpose: This study aimed to investigate the correlation between trunk stabilization muscle activation and the parameters of gait analysis in healthy individuals. Methods: Thirty healthy adults (15 male, 15 female) with no history of lower back pain (LBP) or current musculoskeletal and neurological injuries were studied. Trunk stabilization muscle activation (e.g., external oblique, internal oblique, transverse abdominis, erector spinae) were assessed using surface electromyography. To analyze gait, we measured temporal parameters (e.g., gait velocity, single support phase, double support phase, swing phase, and stance phase) and a spatial parameter (e.g., H-H base of support). Results: A statistically significant correlation was found between the internal oblique, transverse abdominis, and erector spinae muscle activity and gait velocity, single support phase, double support phase, swing phase, and stance phase. No statistically significant correlation was found between the external oblique muscle activity and the gait velocity, single support phase, double support phase, swing phase, and stance phase. No statistically significant correlation was found between the external oblique, internal oblique, transverse abdominis, and erector spinae muscle activity and the spatial parameter. Conclusion: This study demonstrated that a relationship exists between trunk stabilization muscle activation and temporal parameter (i.e., gait velocity, single support phase, double support phase, swing phase, and stance phase) during gait analysis. Therefore, the trunk's stabilizer muscles play an important role in the gait of healthy individuals.