• Journal of the Korean institute of surface engineering
• /
• v.21 no.2
• /
• pp.39-46
• /
• 1988

Corrosion behavior of 5-26wt% Ni-Zn electrodeposited alloys was investigated by means of dipping electrochmical polarization measurement and galvanic coupling test. The weight loss and anodic polarization curve of coatings were measured by means of dipping and polarization measurement respectively. The galvanic protection effect of alloy coatings was measured by galvanic coupling test and the surface morpholgy of coatings was observed after corrosion testing. Our findings support thous of previous investigations showing that ${\gamma}$single phase coatings, while galvanic pprotection effect of dual phase coatings improved in comparison with ${\gamma}$single phase coating. The formation of colony in coating of ${\gamma}$and η+${\gamma}$ dual phsae caused the localized corrsion and increased the corrosion rate of the Ni-Zn coating.

• Korean Journal of Oriental Medicine
• /
• v.15 no.2
• /
• pp.33-37
• /
• 2009

Objectives : The authors performed this study to further understand Saam acupuncture method in an aspect of formation process. Methods : We were finding Saam's idea in a preface of the book. And we analyzed Saam acupuncture patterns to understand their formation. Results & Conclusion : We assume that Saam acupuncture patterns has formed over time. We were able to split their patters into three phases. That is Primitive-phase, Basic-phase and Practical-phase. We think they are traces of Formation Process. In the first, Saam found DongHaeng-acupoints that have in common Five Element between the five viscera and acupoint. And then, he compounded other meridian's DongHeng-acupoints to control self meridian. Finally acupoints of self meridian were added.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.293-313
• /
• 2013

Preproject phase is an important but often ignored research area in information systems field although it has an undeniable importance for successful project. The purpose of this study is to identify factors affecting project performance in preproject phase and to find empirically critical factors among them. After deriving 9 factors through literature review including clear project definition, project leader position, staffing efforts, preproject team expertise, preproject knowledge scope, preproject partnering, top-management support, resource sufficiency, and project climate, the study investigate the influence of those factors on project performance. The study results reveal that clear project definition, project climate, resource sufficiency, pre-project knowledge scope, project leader position have significant impact on project process satisfaction, a measure of project performance, but the other factors do not. Based on the empirical results, the study discuss academic and practical implications.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.2
• /
• pp.112-120
• /
• 2011

The early phase of design intrinsically contains multiple sources of uncertainty in describing design, and nevertheless the decision-making process at this phase exerts a critical effect upon drawing a successful design. This paper proposes a set-based design approach for multi-objective design problem under uncertainty. The proposed design approach consists of four design processes including set representation, set propagation, set modification, and set narrowing. This approach enables the flexible and robust design while incorporating designer's preference structure. In contrast to existing optimization techniques, this approach generates a ranged set of design solutions that satisfy changing sets of performance requirements.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.703-709
• /
• 2006

We report on the synthesis of highly uniform, single phase zinc and cobalt thin films prepared by the Liquid Phase Deposition (LPD) method. X-Ray diffraction, TGA and EDX measurements support the assumption that the as deposited films are constituted by a mixture of crystallized FeOOH and amorphous M(OH)$_2$ (M=Co, Zn) which is converted upon heat treatment in air at 600?C into the corresponding zinc ferrites. The films with adjustable chemical compositions are identified with a crystal structure as spinel-type and present a spherical or rod-like microstructure, depending on the both the nature and concentration of the divalent transition metal ions. Zinc ferrite thin films present a superparamagnetic behavior above blocking temperatures which decrease with increasing the Zn content and are ferromagnetic at 5 K with coercivities ranging between 797.8 and 948.5 Oe, whereas the cobalt ferrite films are ferromagnetic at room temperature with magnetic characteristics strongly dependent on the chemical composition.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1623-1630
• /
• 2018

Normally, various auxiliary loads are installed along with the main load in industrial applications. Usually, load transformers are used to convey such types of auxiliary loads. The transformers become energized when the loads are turned-on, consequently, high amplitude of inrush current appears at the output of the uninterrupted power supply (UPS) system. To mitigate these high current amplitudes, this manuscript suggests a three-phase line-interactive UPS system to counter the inrush current during the turning-on of the auxiliary load transformer while powering the main load by using a current controlled inverter. Experimental results of a laboratory-sized prototype are provided in the support of the proposed UPS system for validation.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.89-94
• /
• 1999

Carbon dioxide reforming of methane on Ni/γ-Al2O3 catalyst was studied. A new 10 wt% Ni/γ-Al2O3 catalyst prepared by the liquid phase oxidation method (L10O) exhibited much higher activity as well as resistances to both sintering and coke formation during the reaction than the catalyst prepared by the conventional impregnation method (D10). The electrically strong attractive interaction between nickel and support during the liquid phase oxidation process and the resultant high nickel dispersion made the L10 have superior activity and stability to the D10. To elucidate the results, the experiments with nickel catalysts on the other supports as well as 7-AI203 were performed. The effect of sodium as a promoter was also studied.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.2
• /
• pp.155-178
• /
• 2020

As the research environment, such as Open Science, has recently changed, the scope of research support services conducted by university libraries is also expanding. In particular, there is a movement that needs to develop research support services of university libraries that are suitable for this through a clear understanding of the research life cycle centering on overseas. The purpose of this study is to provide suggestions that university libraries can refer to when developing research support services that can systematically support all phases of the research life cycle. To this end, the research life cycle was divided into five stages, "planning," "project," "publishing," "preservation" and "disseminating" and the research support services provided at each stage were examined around the cases of U.S. and domestic university libraries. Based on the implications obtained from the case, a service plan was proposed for domestic university libraries to systematically support each phase of the research life cycle.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.46-53
• /
• 2020

Gait analysis is an effective clinical tool across a wide range of applications. Recently, inertial measurement units have been extensively utilized for gait analysis. Effective gait analyses require good estimates of heel-strike and toe-off events. Previous studies have focused on the effective device position and type of triaxis direction to detect gait events. This study proposes an effective heel-strike and toe-off detection algorithm using a smart insole with inertial measurement units. This method detects heel-strike and toe-off events through a time-frequency analysis by limiting the range. To assess its performance, gait data for seven healthy male subjects during walking and running were acquired. The proposed heel-strike and toe-off detection algorithm yielded the largest error of 0.03 seconds for running toe-off events, and an average of 0-0.01 seconds for other gait tests. Novel gait analyses could be conducted without suffering from space limitations because gait parameters such as the cadence, stance phase time, swing phase time, single-support time, and double-support time can all be estimated using the proposed heel-strike and toe-off detection algorithm.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.151-156
• /
• 2016

It has been constantly demanding for effective way to improve software development productivity and automation. In this paper, we did research to configure the component assets to reuse design information from the design phase domains based on the DMI. It is necessary abstracted information architecture of an independent platform development environment to reuse design information on the design stage. Also, It should be based on a well-designed to support the design architecture of the application domain. Therefore, in this paper, I want to use the DMI architecture that can be represented by formal level of architectural design information platform and application domain area. It is able to decomposition architecture asset with the part design information from the design phase composition or a high level of abstraction on DMI. Therefore, the metadata structure of the asset architecture will support a structure which can reuse the structure-based design of the domain areas.