• 제목/요약/키워드: Support Rotation

검색결과 200건 처리시간 0.026초

아치형 조립식 PC 탄약고 설계 및 방호성능 평가 (The Design and Protective Capacity Assessment of the Prefabricated PC Arch Ammo Magazines)

  • 박장권;임철원;류동우;손기영;백종혁;박영준
    • 한국건축시공학회지
    • /
    • 제14권6호
    • /
    • pp.615-621
    • /
    • 2014
  • 본 연구는 수치해석과 폭발 실증시험을 통해 조립식 PC 아치 탄약고의 설계 및 시공도면을 제시하였다. 제안된 탄약고의 방호성능은 미군의 UFC 3-340-02와 한국군의 국방 군사시설 설계기준(탄약고 설계지침)에서 제시된 최대 회전각도로 판별하였다. 아치형 탄약고의 기초설계를 위해 곡면형태인 반원형과 오발형에 대하여 폭발하중에 대한 방호성능을 수치해석을 통해 살펴본 결과 오발형이 타원형에 비하여 지점회전각이 적어 전반적으로 방호성능이 뛰어남을 확일 할 수 있었다. 이를 통해 아치형 조립식 PC 탄약고의 설계안 및 시공도를 제안하였으며, TNT 133.75kg을 구조체 벽체로부터 00m 이격하여 폭발시켜 실제 시공된 탄약고에 대한 방호성능을 검증하였다. 결론적으로, 본 연구에서 제안된 탄약고는 충분한 방호 여유력을 확보하고 있는 것으로 확인할 수 있었다. 향후 이러한 방호 여유력을 고려하여 재료의 절감을 통한 보다 경제적인 탄약고 설계도 가능할 것으로 사료된다.

강구조물 지지부의 강성도가 구조물 거동에 미치는 영향 (Influence of Column Base Rigidity on Behavior of Steel Buildings)

  • 권민호;박문호;장준호;박순응
    • 한국전산구조공학회논문집
    • /
    • 제15권1호
    • /
    • pp.165-172
    • /
    • 2002
  • 일반적으로 모멘트 지지 강구조물은 유한요소법에 의해 이상화되고 해석되어 왔으며 기둥과 기둥의 연결부, 기둥과 보의 접합부의 정확한 비선형 해석 결과를 위해 많은 노력을 해온 반면에 기둥의 지지부에 대한 해석은 고정단 또는 힌지로 간단하게 이루어져 왔다 그러나 실제로 기둥의 지지부는 고정단도 힌지도 아닌 그 중간인 반강성으로 거동한다. 본 논문에서는 이러한 기둥 지지부를 반강성모델을 이용해서 해석하고 그 결과를 고찰하여 기둥 지지부의 강성 및 강도의 변화가 미치는 영향을 평가하였다. 미국 시방서에 의해 설계된 전형적인 두개의 3층 모멘트지지 강구조물을 이미 개발된 강성도법 및 유연도법에 기초한 7iber 유한 요소를 사용하여 해석하였다. 기등의 지지부는 고정단과 힌지사이에 있는 반강성 지지부를 모델하기 위해 다양한 강성도를 갖는 회전 스프링을 사용하였다. 실제의 기둥 지지부와 가깝게 모델된 반강성 지지부를 갖는 구조물의 해석 결과는 고정지지부를 갖는 구조물과 어느 정도 비슷한 결과를 보여주었다. 또한 pushover 해석과 비선형 시간 이력 해석을 통해 기둥 지지부의 강성도가 감소함에 따라 1층 보의 소요 처짐각(rotational demand)이 증가하는 현상이 관찰되었다 시공상의 문제 및 노화로 인한 기동 지지부의 강성도 감소는1층의 접합부에 대한 소요 터짐각의 증가를 유발하고 그것은 곧 soft-story mechanism을 유발하게 된다.

고정식 장치를 이용한 조기 맹출 소구치의 안정화 (STABLIZATION OF THE EARLY ERUPTED FIRST PREMOLAR WITH FIXED APPLIANCE)

  • 황지원;김성오;최형준;최병재;손홍규;이제호
    • 대한소아치과학회지
    • /
    • 제38권1호
    • /
    • pp.62-67
    • /
    • 2011
  • 치아의 맹출은 일반적으로 치근의 1/2~2/3이 완성(Nolla stage 7)되었을 때 임상적으로 출은(emergence)하여 치근 형성이 완성되기 전에 교합평면에 도달한다. 조기 맹출이란 맹출이 가속화되어 정상 맹출 시기 보다 이른 시기에 맹출하는 것으로, 일반적으로 정상 범주를 벗어나는 영구치의 조기 맹출은 매우 드물며 유치의 만성 치근단 주위염 등의 국소적 원인으로 인한 계승 영구치의 상방 치조골이 광범위하게 파괴되었을 때 치아의 치관이나 치근의 형성이 거의 이루어지지 않은 채 계승 영구치가 조기 맹출하는 것을 관찰할 수 있다. 또한 영구치의 조기 맹출에 영향을 미칠 수 있는 여러 전신 질환이 있는 경우에도 영구치의 조기 맹출이 가능하다. 조기맹출 치아의 임상 소견으로는 심한 동요도와 저작 시 동통, 법랑질의 저석회화, 치아의 편향과 변위, 회전 등이 있으며, 방사선학적 소견으로는 미발육된 치근과 골지지의 부족 등이 있다. 조기 맹출 영구치의 발생 가능한 합병증으로는 만성적인 외상과 동통 및 부종이 있을 수 있고, 맹출 순서의 변경과 인접치의 이동으로 인한 소구치 매복율의 증가, 치아의 변위와 회전이 야기될 수 있으며, 영구치의 탈락도 있을 수 있다. 따라서 증상이 있는 조기 맹출 영구치의 경우 공간 유지 및 영구치 고정과 주위 조직의 회복, 치근 발육의 유도를 위해 적절한 처치가 필요하다. 전신 질환이 없는 만7세 여환이 상악 양쪽 제 1소구치의 심한 동요도와 동통을 주소로 치과 의원에서 의뢰되었다. 임상 및 방사선 검사상 치근 형성이 거의 없이 양측 상악 제 1소구치들이 조기 맹출되어 심한 동요도와 부종 및 저작 시동통을 나타내어 상악 제 2유구치에 교정용 band와 spur를 이용한 구내 고정식 장치를 제작하여 14개월 간 장착하여 조기 맹출한 치아들을 안정화시키고 성공적으로 치근 형성을 도모하였기에 이를 보고하는 바이다.

시공 중 풍하중에 의한 PSC 교량 거더의 횡방향 거동 해석 (Analysis of Lateral Behavior of PSC Bridge Girders under Wind Load During Construction)

  • 이종한;김경환;조백순
    • 콘크리트학회논문집
    • /
    • 제27권4호
    • /
    • pp.377-385
    • /
    • 2015
  • PSC I 거더의 장경간화는 단면의 세장비와 자중의 영향 등을 증가시켜 거더의 횡적 불안정에 대한 위험성을 높였다. 특히 최근에는 시공 중 거더의 전도 붕괴사고가 증가하고 있어 거더의 횡적 불안정성에 대한 평가 기술이 절실히 요구되고 있다. 따라서, 본 연구에서는 시공 중 전도 붕괴의 한 원인으로 판단되어지고 있는 풍하중에 대하여 PSC I 거더의 횡방향 거동 특성과 안정성을 평가하였다. 거더의 횡방향 불안정성은 주로 거더의 길이와 받침의 강성 변화에 의해 영향을 받는다. 해석결과에 의하면 거더의 경간장이 증가함에 따라 거더의 횡적 불안정성을 유발할 수 있는 임계 풍하중은 감소하고, 거더의 변형과 회전각, 받침의 회전각은 모두 증가하였다. 최종적으로 시공 시 PSC I 거더의 임계 풍하중과 임계 횡변위량을 계산할 수 있는 해석식을 제시함으로써, 시공 시 거더의 횡적 안정성을 유지하기 위한 정량적 관리 수치를 제공할 수 있으리라 판단된다.

아라베스크 회전동작 시 지면반력 활용방법에 관한 연구 (The Research for Using Method of GRF (Ground Reaction Force) on Rotational Movement in Arabesque)

  • 권안숙;이건범
    • 한국운동역학회지
    • /
    • 제15권2호
    • /
    • pp.1-10
    • /
    • 2005
  • G. B. LEE, A. S. GWON, The Research for Using methodof GRF (Ground Reaction Force) on Rotational Movement in Arabesque. Korean Journal of Sport Biomechanics, Vol. 15, No. 2, pp.1-10, 2005. As, in relation to all movements of a human being, the movements such as mutually walking, running, rotating, and jumping are attained endlessly through the ground amid the interaction with the ground, in terms of the harmonious movement of the upper limbs and the lower limbs, related to the basic movement in ballet, the type of a movement depends on the size and direction of the force that presses down the ground (Fz, Fx, Fy) amid the interaction with the ground. Therefore, aiming to correctly and efficiently perform a rotational movement in Arabesque, this study analyzed factors of the force manifestation through GRF (Ground Reaction Force), by dividing into preparing, stepping, standing, rotating, and finishing stages (events (1) ${\sim}$ (5)), targeting the subjects of 4 elite female students who majored in ballet. 1. At the No.5 position of the preparing stage, It is necessary that support the ground with left and right foot balance, 2. As the stepping stage is the phase ranging from the event (2), in which a plie movement of bending a knee is started, to the event (3) of stretching a knee, Rebunding motion is not good, and One have a position with ankle and knee flextion condition in order to stretch strengthly in event (3) position 3. At the event (1) position, It is necessary that exert the Fz reaction force at the event (3) position. Because large stretch force help to have a toe on position easily and show a active motion 4. In order to have a stand and rotation motion smoothly, One need a muscle strength training for ankle extension, knee extension, control horizental force

Steep plasma density gradient at middle latitudes observed by DMSP and TOPEX during the magnetic storm of 11-12 April 2001

  • Park, Sa-Rah;Kim, Khan-Hyuk;Kil, Hyo-Sub;Jee, Geon-Hwa;Lee, Dong-Hun;Goldstein, J.
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2011년도 한국우주과학회보 제20권1호
    • /
    • pp.26.3-27
    • /
    • 2011
  • Formation of a steep plasma density gradient in the middle-latitude ionosphere during geomagnetic storms and the latitudinal migration of its location depending on the storm phase are suggested to be associated with the ionospheric signature of the plasmapause. We test this idea by using the satellite and ground observation data during the 11 April 2001 storm. The locations of the steep plasma density gradient identified by TOPEX/Poseidon (2001 LT) and DMSP (1800 and 2130 LT) satellites coincide with the ionospheric footprints of the plasmapause identified by the IMAGE satellite. This observation may support the dependence of the middle-latitude plasma density gradient location on the plasmapause motion, but does not explain why the steep density gradient whose morphology is largely different from the morphology of the middle-latitude ionization trough during quiet period is formed in association with the plasmapause. The ionospheric disturbances in the total electron content (TEC) maps shows that the steep TEC gradient is formed at the boundary of the positive ionospheric storm in low-middle latitudes and the negative ionospheric storm in middle-high latitudes. We interpret that the thermospheric neutral composition disturbance in the dayside is confined within the middle-high latitude ionospheric convection zone. The neutral composition latitudes and, therefore, the locations of the steep plasma density gradient coincide with the footprints of the plasmapause. The TEC maps show that the appearance of the steep plasma density gradient in the pre-midnight sector during the recovery phase is related to the co-rotation of the gradient that is created during the main phase.

  • PDF

증강 현실에서의 장난감 블록 결합을 위한 큐브형 사용자 인터페이스 (Cubical User Interface for Toy Block Composition in Augmented Reality)

  • 이형묵;이영호;우운택
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.363-367
    • /
    • 2009
  • 본 논문에서는 증강현실 환경에서의 장난감 블록 타입의 가상 객체 결합을 위한 큐브형 사용자 인터페이스(CUI)를 제안한다. 가상 객체 결합에 의한 새로운 객체 생성은 다양한 증강현실 콘텐츠의 효과적 구성을 가능하게 한다. 하지만 대부분의 GUI 방식은 오랜 학습시간을 요구하거나 사용자의 행위와 제공되는 인터페이스 간에 직관성이 결여되어 있다. 증강현실 인터페이스들의 경우에도 주로 한 손 상호작용만을 지원하기 때문에 객체 간 결합의 특성을 크게 고려하지 않고 있다. 따라서, CUI 는 증강현실 환경에서 가상 장난감 블록 모델의 결합을 위한 조작도구인 감각형 큐브를 제시한다. 다수 마커, 자석, 그리고 버튼이 부착된 감각형 큐브는 가상 객체의 자유로운 회전, 결합, 그리고 버튼 입력을 지원한다. 또한 본 논문에서는 CUI 기반의 두 가지 양 손 결합 상호작용 기법을 제안한다. 첫째는 가상 객체의 3 차원 위치조정이 가능한 스크류 드라이빙 결합 방식이며 둘째는 시각적 안내를 지원하는 빠르고 직관적인 블록 조립 결합 방식이다. 제안하는 인터페이스는 교육, 오락, 그리고 디지로그북 콘텐츠 등을 구성하기 위한 저작 시스템에 적용될 수 있을 것으로 기대된다.

  • PDF

실내공간의 이미지 전회비교 평가를 통한 공간유형별 지각특성에 관한 연구 (A Study on perceptive characteristics of space type through comparative evaluation on the image rotation of Interior Space)

  • 최계영;김종하;이상근
    • 한국실내디자인학회논문집
    • /
    • 제19권6호
    • /
    • pp.179-187
    • /
    • 2010
  • For the user-centered interior space design, a designer needs to carefully focus on the details from which the user must keenly observe or concentrate on the space and how to deliberately check the image of the space. Following this view, for the user-centered interior space design this study analyzes the way which the space is represented from the perspective of the image assessment. The results obtained from this study are summarized as follows: First, this study analyzed the characteristic of space image change in the form of cross-comparison between one space and a rotated space. With analyzing of an eye fixation by showing the space, the space images of "concentration-dispersion" and "strengthening-weaken "have an important role in the analysis of the perception of space. it confirmed that the method of space perception was changed by rotated the space. Second, With changing quantities of image and extraction of deviation from adjective in survey, it quantitatively graps that respondents of feel in space perception by changing the space and "concentration" and 'dispersion" for process of space choice. The results of the research can provide important basis to judge the changing of space perception by visual perception. Third, through the analysis of image change rate and deviation rate, the characteristics of image change with space change can be analyzed. The results derived from the study provide the evidence to support the image change by space rotating.

Cross-Shaped Magnetic Coupling Structure for Electric Vehicle IPT Charging Systems

  • Ren, Siyuan;Xia, Chenyang;Liu, Limin;Wu, Xiaojie;Yu, Qiang
    • Journal of Power Electronics
    • /
    • 제18권4호
    • /
    • pp.1278-1292
    • /
    • 2018
  • Inductive power transfer (IPT) technology allows for charging of electric vehicles with security, convenience and efficiency. However, the IPT system performance is mainly affected by the magnetic coupling structure which is largely determined by the coupling coefficient. In order to get this applied to electric vehicle charging systems, the power pads should be able to transmit stronger power and be able to better sustain various forms of deviations in terms of vertical, horizontal direction and center rotation. Thus, a novel cross-shaped magnetic coupling structure for IPT charging systems is proposed. Then an optimal cross-shaped magnetic coupling structure by 3-D finite-element analysis software is obtained. At marking locations with average parking capacity and no electronic device support, a prototype of a 720*720mm cross-shaped pad is made to transmit 5kW power at a 200mm air gap, providing a $1.54m^2$ full-power free charging zone. Finally, the leakage magnetic flux density is measured. It indicates that the proposed cross-shaped pad can meet the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) according to the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).