• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.6
• /
• pp.397-402
• /
• 2009

The purpose of this study is to investigate the effects of alendronate and pamidronate on proliferation and the alkaline phosphatase activity of human bone marrow derived mesenchymal stem cells and to relate the results with bisphosphonate related osteonecrosis of the jaw(BRONJ). With the consent of patients with no systemic disease and undergoing iliac bone graft, cancellous bone was collected to obtain human bone marrow derived mesenchymal stem cells through cell culture. 96 well plate were prepared with a concentration of $10^4$cell/ well. Alendronate and pamidronate were added to each well with the concentration of $10^{-6}M$, $10^{-8}M$ and $10^{-10}M$, respectively. Then proliferation capacity of each well was evaluated with the cell counting kit. 24 well plates were prepared with a concentration of $10^5$cell/ml/well and with the bone supplement, alendronate and pamidronate were added with the concentration of $10^{-6}M$, $10^{-8}M$ and $10^{-10}M$, respectively on each plate. The plates were cultured for either 24 or 72 hours. Then the cells were sonicated to measure the alkaline phosphatase activity and protein assay was done to standardize the data for analysis. As the concentration of alendronate or pamidronate added to the culture increased, the proliferation capacity of the cells decreased. However, no statistical significance was found between the group with $10^{-10}M$ of bisphophonate and the control group. Pamidronate was not capable of increasing the alkaline phosphatase activity in all trials. However, alkaline phosphatase activity increased with 24 hours of $10^{-8}M$ of alendronate treatment and with 48 hours of $10^{-10}M$ of alendronate treatment. Cell toxicity increased as the bisphosphonate concentration increased. This seems to be associated with the long half life of bisphosphonate, resulting in high concentration of bisphosphonate in the jaw and thus displaying delayed healing after surgical procedures. Alendronate has shown to increase the alkaline phophatase activity of human bone marrow derived mesenchymal stem cells. However, this data is insufficient to conclude that alendronate facilitates the differentiation of human bone marrow derived mesenchymal stem cells. Further studies on DNA level and animal studies are required to support these results.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• Progress in Medical Physics
• /
• v.29 no.2
• /
• pp.59-65
• /
• 2018

This paper describes the clinical use of the dose verification of multileaf collimator (MLC)-based CyberKnife plans by combining the Octavius 1000SRS detector and water-equivalent RW3 slab phantom. The slab phantom consists of 14 plates, each with a thickness of 10 mm. One plate was modified to support tracking by inserting 14 custom-made fiducials on surface holes positioned at the outer region of $10{\times}10cm^2$. The fiducial-inserted plate was placed on the 1000SRS detector and three plates were additionally stacked up to build the reference depth. Below the detector, 10 plates were placed to avoid longer delivery times caused by proximity detection program alerts. The cross-calibration factor prior to phantom delivery was obtained by performing with 200 monitor units (MU) on the field size of $95{\times}92.5mm^2$. After irradiation, the measured dose distribution of the coronal plane was compared with the dose distribution calculated by the MultiPlan treatment planning system. The results were assessed by comparing the absolute dose at the center point of 1000SRS and the 3-D Gamma (${\gamma}$) index using 220 patient-specific quality assurance (QA). The discrepancy between measured and calculated doses at the center point of 1000SRS detector ranged from -3.9% to 8.2%. In the dosimetric comparison using 3-D ${\gamma}$-function (3%/3 mm criteria), the mean passing rates with ${\gamma}$-parameter ${\leq}1$ were $97.4%{\pm}2.4%$. The combination of the 1000SRS detector and RW3 slab phantom can be utilized for dosimetry validation of patient-specific QA in the CyberKnife MLC system, which made it possible to measure absolute dose distributions regardless of tracking mode.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.383-390
• /
• 2013

Mistlero C was shown to be non-genotoxic in a series of genotoxicity tests, including a bacterial reverse mutation test and a combined in vivo mammalian erythrocyte micronucleus test. In a bacterial reverse mutation assay, no significant increases in the number of revertant colonies, compared to the negative control, was detected in $5,000{\mu}g/plate$ of Mistlero C. In addition, with Mistlero C, no changes were shown in the number of micronucleated polychromatic erythrocytes (MNPCE) among 2,000 polychromatic erythrocytes compared to the negative control. Mistlero C was administered orally in rats to investigate acute toxicity. The $LD_{50}$ values in rats were above 2,000 mg/kg. In a repeated dose, 13-week, oral toxicity study conducted in rats, no compound-related adverse effects were shown at doses of Mistlero C of up to 1,000 mg/kg body weight/day. The results of these studies support the safe use of Mistlero C in food for human consumption.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.1
• /
• pp.101-117
• /
• 1999

Amyotrophic lateral sclerosis (ALS) is a degenerative neuromuscular disease of unknown etiology in which the upper and lower motor neurons are progressively destroyed. Recent evidences support the role of autoimmune mechanisms in the pathogenesis of ALS. This study investigated the effects of sera from ALS patients on neuromuscular transmission in phrenic nerve-hemidiaphragm preparations and on calcium currents of single isolated dorsal root ganglion (DRG) cells in mice. Mice were injected with either control sera from healthy adults or ALS sera from 18 patients with ALS of sporadic form, for three days. Miniature end plate potential (MEPP) and nerve-evoked end plate potential (EPP) were measured using intracellular recording technique and the quantal content was determined. Single isolated DRG cells were voltage-clamped with the whole-cell configuration and membrane currents were recorded. Sera from 14 of 18 ALS patients caused a significant increase in MEPP frequency in normal Ringer's solution $(4.62{\pm}0.14\;Hz)$ compared with the control $(2.18{\pm}0.15\;Hz).$ In a high $Mg^{2+}/low\;Ca^{2+}$ solution, sera from 13 of 18 ALS patients caused a significant increase in MEPP frequency, from $2.18{\pm}0.31$ Hz to $6.09{\pm}0.38$ Hz. Sera from 11 of 18 patients produced a significant increase of nerve-evoked EPP amplitude, from $0.92{\pm}0.05$ mV to $1.30{\pm}0.04$ mV, while the other seven ALS sera did not alter EPP amplitude. In the ALS group, EPP quantal content was also elevated by the sera of 14 patients (from $1.49{\pm}0.07$ to $2.35{\pm}0.07).$ MEPP frequency and amplitude in wobbler mouse were $4.03{\pm}0.53$ Hz and $1.37{\pm}0.18$ mV, respectively, which were significantly higher than those of wobbler controls (wobblers without the symptoms of wobbler). Sera from ALS patients significantly reduced HVA calcium currents of DRG cells to 42.7% at -10 mV. Furthermore, the inactivation curve shifted to more negative potentials with its half-inactivation potential changed by 6.98 mV. There were, however, significant changes neither in the reversal potential of $I_{Ca}$ nor in the I-V curve. From these results it was concluded that: 1) The serum factors of sporadic ALS patients increase neuromuscular transmission and can alter motor nerve terminal presynaptic function. This suggests that ALS serum factors may play an important role in the early stage of ALS, and 2) Calcium currents in DRG cells were reduced and rapidly inactivated by ALS sera, suggesting that in these cells, ALS serum factors may exert interaction with the calcium channel.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.135-148
• /
• 1997

The main objective of this paper is to analyze the rectangular stiffened plates with two opposite ends elastically restrained and the others simply supported subjected to in-plane bending by Finite Element Method. Another objective is to develope Classical Method analyzing the unstiffened rectangular plates with the above boundary conditions. In order to validate finite element and classical methods, the buckling strengths of the rectangular plates with four simply supported ends, and with two simply supported and the others fixed ends by finite element method and classical method are compared with those of references. In finite element method, elastically restrained ends can be obtained as considering torsional and warping rigidities of end stiffeners. The buckling strengths of the rectangular plates with elastically restrained ends by finite element and classical methods are calculated and compared with each other. In case of stiffened plates, to validate finite element method, the buckling strengths of the rectangular stiffened plates with four simply supported ends, and with two simply supported and the others fixed ends are also compared with those of references. The buckling strengths of the rectangular stiffened plates with elastically restrained ends by finite element method are calculated as solving eigenvalue problems which are obtained as assembling rectangular plate elements and beam elements considered torsional and warping rigidities. The buckling strengths of rectangular stiffened plates according to various positions of rectangular intermediate stiffener, J and I/sub w/ of end stiffeners are also obtained, which are compared to determine the efficient position of intermediate stiffener.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.4
• /
• pp.185-194
• /
• 2018

The basaltic rocks of Daljeon-ri columnar joint (Natural Monuments # 415) and Noeseongsan Noerok site (Natural Monuments # 547) were analysed in order to understand basalt types of two areas. The basaltic rocks of the Pohang Daljeon-ri columnar joint show a typical porphyritic texture containing phenocrysts (olivine and clinopyroxene) and groundmasses composed of clinopyroxene, plagioclase, and opaque minerals,. In contrast, basaltic rocks of Noeseongsan Noerok are characterized by fine-grained groundmass with large phenocrysts of plagioclase. Other analysis such as magnetic susceptibility, X-ray diffraction and X-ray fluorescence also support the petrological differences of two basalt rocks. The Daljeon-ri basaltic rocks are plotted on phonotephrite volcanic rocks of alkaline series in TAS(total alkali silica), and on within plate basalt in Zr-Ti diagram. The Noeseongsan basalts, on the other hand, are plotted on basaltic andesite to andesite of sub-alkaline series in TAS, and on volcanic arc basalt in Zr-Ti diagram. These results indicate that the original mantle materials between two basalt rocks were different each other, which probably originated from the change of a tectonic setting in the southeastern Korean peninsula during the Miocene.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.63-77
• /
• 1990

The combined deckstructure-car system of a car carrier is especially sensitive to hull girder vibrations due to mechanical excitations and wave loads. For the free and forced vibration analysis of the system, the analytical methods based on the receptance method and two schemes for efficient applications of the methods are presented. The methods are especially relevant to dynamical reanalysis of the system subject to design modification or to dynamic optimization. The deck-car system is modelled as a combined system consisting of a stiffened plate representing deck, primary structure, and attached subsystems such as pillars, additional stiffeners and damped spring-mass systems representing cars/trucks. For response calculations of the system subjected to displacement excitations along the boundaries, the support displacement transfer ratio conceptually similar to the receptance is introduced. For the verification of accuracy and calculation efficiency of the proposed methods, numerical and experimental investigations are carried out.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.105-127
• /
• 1999

Application of the soil nailing method is continuously extended in maintaining stable excavations and slopes. Occasionally, however, ground anchor support system may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then, could play important roles in reducing deformations mainly in an upper part of the nailed-soil excavation system as well as improving local stability. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the pretensioned soil nailing system. Also proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. The predicted results are compared with the limited measurements obtained from the excavation site constructed by using the pretensioned soil nails. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and FLAC$^{2D}$ program analysis.s.