• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.586-597
• /
• 2022

In this study, a model was developed for the estimating the locational thickness information of the upper clay layer to be used for the consolidation vulnerability evaluation in the Nakdong river estuary. To estimate ground layer thickness information, we developed four spatial estimation models using machine learning algorithms, which are RF (Random Forest), SVR (Support Vector Regression) and GPR (Gaussian Process Regression), and geostatistical technique such as Ordinary Kriging. Among the 4,712 borehole data in the study area collected for model development, 2,948 borehole data with an upper clay layer were used, and Pearson correlation coefficient and mean squared error were used to quantitatively evaluate the performance of the developed models. In addition, for qualitative evaluation, each model was used throughout the study area to estimate the information of the upper clay layer, and the thickness distribution characteristics of it were compared with each other.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.363-371
• /
• 2019

In this study, the load carrying behavior of piled rafts installed in inclined bearing rock layer was investigated for rock-mounted and -socketed conditions. It was found that settlements induced for an inclined bearing rock layer are larger than for a horizontal layer condition. The load capacity of piled rafts for the rock-mounted condition decreased as rock-layer inclination angle (${\theta}$) increased, while vice versa for the rock-socketed condition. The load capacities of raft and piles both decreased with increasing ${\theta}$ for the rock-mounted condition. When bearing rock layer was inclined, loads carried by uphill-side piles were greater than those by downhill-side piles. The values of differential settlements of rock-mounted and -socketed conditions were not significantly different whereas slightly higher for the rock-socketed condition. The values of load sharing ratio (${\alpha}_p$) and its variation with settlement were not markedly changed by the inclination of bedrock. It was shown that ${\alpha}_p$ for piled rafts installed in rock layer was not affected by ${\theta}$ whereas actual loads carried by raft and piles may vary depending on the pile installation and rock-layer inclination conditions.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.147-154
• /
• 2022

We demonstrate a new double-layer structure for stretchable interconnects, where the top surface of a serpentine polyimide support is coated with a thin eutectic gallium-indium liquid metal layer. Because the liquid metal layer is constantly fixed on the solid serpentine body in this liquid-on-solid structure, the overall stretching is accomplished by widening the solid frame itself, with little variation in the total length and cross-sectional area of the current path. Therefore, we can achieve both invariant resistance and infinite fatigue life by combining the stretchable configuration of the underlying body with the freely deformable nature of the top liquid conductor. Further, we fabricated various types of double-layer interconnects as narrow as 10 ㎛ using the roll-painting and lift-off patterning technique based on conventional photolithography and quantitatively validated their beneficial properties. The new interconnecting structure is expected to be widely used in applications requiring high-performance and high-density stretchable circuits owing to its superior reliability and capability to be monolithically integrated with thin-film devices.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.1
• /
• pp.30-33
• /
• 2008

This paper persents how to port HAL (Handset Abstraction Layer) on embedded Linux to support WIPI (Wireless Internet Platform for Interoperability). As smart phones are widespread nowdays, the operating system is changing from a simple kernel like Qualcomm REX OS to more feature-rich Linux kernel. For this reason, we investigate the internal structure of HAL on REX OS and design how to port it to embedded Linux. Careful analysis leads us to identify several porting issues such as thread support, graphical user interface. In addition, we describe some problems discovered during the implementation process and propose alternative architecture of HAL for WIPI on Linux.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.243-248
• /
• 2004

A palladium-nikel(Pd-Ni) alloy composite membrane has been fabricated on microporous nickel support formed with nickel powder. Plasma surface treatment process is introduced as pre-treatment process instead of HCI activation. Pd coating layer was prepared by dc magnetron sputtering deposition after $H_2$ plasma surface treatment. Palladium-nickel alloy composite layer had a fairly uniform and dense surface morphology. The membrane was characterized by permeation experiments with hydrogen and nitrogen gases at temperature of 773 K and pressure of 2.2psi. The hydrogen permeance was 6 ml/minㆍ$\textrm{cm}^2$ㆍatm and the selectivity was 120 for hydrogen/nitrogen($H_2$/$N_2$) mixing gases at 773 K.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.165-170
• /
• 1999

Palladium membranes have high selectivity of separation and removal of hydrogen to chemical process at high temperature. For the development of hydrogen permeable membrane, palladium was deposited on porous stainless steel support by electroless plating method. In this work, the activation effect on the surface of stainless steel support has been investigated for the effective palladium plating. The morphology and microstructure were characterized by SEM and the composition was analyzed by EDX. It is found that the composition of deposited nuclei on the stainless steel support was changed in accordance with activation cycles. It is also observed that Sn-enriched nuclei has been changed to Pd-enriched nuclei over the fifteenth activation. The uniform deposition of the dense palladium layer on porous stainless steel support has been performing with Sn-enriched nuclei and comparing with Pd-enriched nuclei.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.882-885
• /
• 2008

Recently, various types of wireless networks have been proliferated. Bluetooth, IEEE 802.11 WLAN, 802.16e Mobile WiMAX (or Wibro) and 3G celluar networks are some examples. Accordingly, research on seamless mobility support mechanisms among homogeneous or heterogeneous networks has drawn significant interests. This paper examines recent research efforts on seamless mobility support mechanisms from link to transport layer. Yet, no single solution meets all the requirements for supporting the seamless mobility and it seems hard to tell which layer is the most appropriate one for supporting mobility. This area is still wide open and needs further research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.866-871
• /
• 2006

This paper presents the design of a reservation-based MAC protocol to support multimedia traffic over mobile ad-hoc networks and evaluates its performance. Our MAC protocol is based on a hierarchical approach consisting of two sub-layers. The lower sub-layer of the MAC protocol with reservation provides a fundamental access method using CSMA/CA in order to support asynchronous data traffic over mobile ad-hoc networks. The upper sub-layer supports real-time periodic data by making a slot reservation before transmitting actual data. The proposed protocol has been validated through simulations using ns-2. The results show that the proposed MAC protocol can offer higher throughput and lower delay than standard implementations of the IEEE 802.11.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.419-428
• /
• 2004

Due to the deployment problem of the IP Multicast service, the Application Layer Multicast (or Overlay Multicast) has appeared as an alter-native of the If Multicast. However, even though plenty of the Application Layer Multicast (ALM) Protocols were designed and their applications were developed according to the diverse requirements of each multicast service, researches on the ALM Protocols are focused on only a protocol design or an efficient multicast group management algorithm. And there is little effort to provide a unified guideline for development of the ALM Protocols and provide an environment for running multiple protocols simultaneously in a system. In this paper, we propose socket APIs to be a reference in developing new ALM Protocols which enables a system to support multiple protocols in a system with other ALM Protocols and which gives an environment to support efficient protocol management.