• 제목/요약/키워드: Support Layer

검색결과 838건 처리시간 0.026초

인터넷 QoS 지원 이동 IP 망에서의 정책기반 망 관리 시스템 설계 및 구현 (ADesign and Implementation of Policy-based Network Management System for Internet QoS Support Mobile IP Networks)

  • 김태경;강승완;유상조
    • 한국통신학회논문지
    • /
    • 제29권2B호
    • /
    • pp.192-202
    • /
    • 2004
  • 2본 논문에서는 인터넷 QoS 지원 이동 IP 망에서의 정책기반 네트워크 시스템 설계 및 망관리 시스템 구현 방법에 대해 제안한다. 본 논문의 망관리 시스템은 정책기반 네트워크의 정책서버로서의 역할을 하게 된다. 인터넷 QoS 지원 이동 IP 망에서의 정책기반 네트워크의 전체적인 프레임워크는 크게 응용계층, 정보관리계층, 정책제어 계층, 디바이스계층의 네 계층으로 나뉘어 통합된 관리를 수행하는 구조를 가지고 있으며, 이러한 통합된 망관리 시스템에 적용할 네 가지 범주(access control, mobile IP operation, QoS control, network monitoring)의 정책 구조를 정의하고 이에 따른 동작 절차의 예를 보인다. 실제 QoS 지원 이동 IP 망에서의 정책기반 망관리 시스템의 구현을 위한 설계 방법 및 S/W의 구조와 각 모듈 별 기능에 대해 제시하고 이 망관리 시스템과 각각의 에이전트들과의 원활한 통신을 위해 개발한 SCOPS(Simple Common Open Policy Service)프로토콜의 구조 및 기능에 대해 정의한다. 마지막으로 제안된 인터넷 QoS 지원 이동 IP 망에서의 정책기반 망관리 시스템을 실험실 규모의 테스트 베드에 적용하여 구성하는 방법에 대해 자세히 설명하고 성능평가한다.

친수성 PEGDA 하이드로젤 지지체 기반 FO 분리막의 제조 (Fabrication of Hydrophilic PEGDA Hydrogel-supported Forward Osmosis Membranes)

  • 김달용;박성준;이정현
    • 멤브레인
    • /
    • 제33권6호
    • /
    • pp.383-389
    • /
    • 2023
  • 폴리에틸렌 글라이콜 다이아크릴레이트 (polyethylene glycol diacrylate, PEGDA) 하이드로젤을 정삼투 (forward osmosis, FO) 분리막의 지지체로 사용하여 고성능의 FO 분리막을 제조하였다. 친수성의 PEGDA를 자외선 조사를 통한 중합과 그에 따른 상분리를 이용하여 다공성으로 구조화하였고, 매우 높은 친수성을 가진 하이드로젤 지지체를 얻을 수 있었다. 제조된 친수성 PEGDA 지지체 위에 높은 수투과도와 염 선택도를 확보하기 위해서 일반적인 계면중합 방식이 아닌 톨루엔을 유기 용매로 사용한 계면중합 방식(TIP)으로 선택층을 도입하였다. 제조된 PEGDA 지지체 기반 분리막은 1.0 M NaCl 유도 용액과 증류수 유입수를 통한 FO 성능 측정에서 상용 HTI 분리막들에 비해서 매우 높은 수투과도와 낮은 염 선택도를 나타내었다. 본 연구를 통해, 기존의 소수성 지지체를 추가적으로 개질하는 방식이 아닌 새로운 물질과 제조방식을 사용한 FO 지지체의 가능성을 제시하고자 한다.

금속 사출성형 방식의 다공성 스테인리스 강 지지체에 형성된 팔라듐 수소 분리막의 투과 선택도 특성 (Hydrogen Perm-Selectivity Property of the Palladium Hydrogen Separation Membranes on Porous Stainless Steel Support Manufactured by Metal Injection Molding)

  • 김세홍;양지혜;임다솔;김동원
    • 한국표면공학회지
    • /
    • 제50권2호
    • /
    • pp.98-107
    • /
    • 2017
  • Pd-based membranes have been widely used in hydrogen purification and separation due to their high hydrogen diffusivity and infinite selectivity. However, it has been difficult to fabricate thin and dense Pd-based membranes on a porous stainless steel(PSS) support. In case of a conventional PSS support having the large size of surface pores, it was required to use complex surface treatment and thick Pd coating more than $6{\mu}m$ on the PSS was required in order to form pore free surface. In this study, we could fabricate thin and dense Pd membrane with only $3{\mu}m$ Pd layer on a new PSS support manufactured by metal injection molding(MIM). The PSS support had low surface roughness and mean pore size of $5{\mu}m$. Pd membrane were prepared by advanced Pd sputter deposition on the modified PSS support using fine polishing and YSZ vacuum filling surface treatment. At temperature $400^{\circ}C$ and transmembrane pressure difference of 1 bar, hydrogen flux and selectivity of $H_2/N_2$ were $11.22ml\;cm^{-2}min^{-1}$ and infinity, respectively. Comparing with $6{\mu}m$ Pd membrane, $3{\mu}m$ Pd membrane showed 2.5 times higher hydrogen flux which could be due to the decreased Pd layer thickness from $6{\mu}m$ to $3{\mu}m$ and an increased porosity. It was also found that pressure exponent was changed from 0.5 on $6{\mu}m$ Pd membrane to 0.8 on $3{\mu}m$ Pd membrane.

GPRS/UMTS의 Core Network에서 SVC holding time 제어기법 (The Control Mechanism on SVC holding time of Core Network in GPRS/ UMTS Network)

  • 곽용원;박웅;정영식;민재홍
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 춘계종합학술대회
    • /
    • pp.648-652
    • /
    • 2003
  • 제 3세대 이동 통신망인 GPRS(General Packet Radio Service)망에서는 SGSN(Serving GPRS Support Node)과 GGSN(Gateway GPRS Support Node) 사이의 전송계층을 IP-Over-ATM 망을 기반으로 한다. 이는 비연결형(connectionless) IP 트래픽들을 연결지향형(connection-oriented) ATM 전송계층을 통해 전송하는 것을 의미한다. 이때 효율적인 자원관리를 위해 적절한 VC(Virtual Circuit)의 접속과 해제를 수행해야 한다. 본 논문에서는 GPRS망에 인터넷 웹 서비스 트래픽 모델을 다양한 VC holding Cost Pricing Model(LRU, Mean-Variance, Adaptive policy[2])에 적용하였다. 각각의 기법들에서 VC의 이용율(utilization)과 설정율(setup rate)을 분석함으로써 각 기법의 성능을 비교하였다.

  • PDF

멀티미디어 스트리밍 서비스를 지원하기 위한 트랜스포트 계층에서의 이동성 지원 방안 (A Transport Layer Mobility Support Approach for Multimedia Streaming Services)

  • 장문정;이미정
    • 정보처리학회논문지C
    • /
    • 제12C권6호
    • /
    • pp.917-926
    • /
    • 2005
  • PR-SCTP를 이동환경 지원이 가능하도록 확장함으로써 이동 환경에서 멀티미디어 스트림 전송을 요구하는 응용을 지원하는 트랜스포트 계층 이동성 지원 프로토콜인 uPR-mSCTP를 제안하였다. uPR-mSCTP에서는 비순서화 비신뢰성 데이터 전송 서비스를 지원하기 위한 규칙을 정의하였고, 핸드오버 시 핸드오버 지연을 최소화할 수 있는 방안을 제안하였다. 시뮬레이션을 통해 IPv6에 uPR-mSCTP를 탑재한 경우와 UDP를 탑재한 네트워크 계층 이동성 지원 프로토콜들의 성능을 비교한 결과, uPR-mSCTP는 핸드오버 시 패킷전송률을 줄이기 때문에 네트워크 자원낭비를 줄이고, FMIPv6에 근접하는 패킷손실률을 보이며, MIPv6 HMIPv6에 비해서는 훨씬 낮은 패킷 손실률을 보임을 알 수 있었다. 또한 uPR-mSCTP는 UDP를 탑재한 네트워크 계층 이동성 지원에 비해 제어패킷 오버헤드를 줄이는 장점을 가진다.

Experimental and numerical study on the stability of slurry shield tunneling in circular-gravel layer with different cover-span ratios

  • Liu, Xinrong;Liu, Dongshuang;Xiong, Fei;Han, Yafeng;Liu, Ronghan;Meng, Qingjun;Zhong, Zuliang;Chen, Qiang;Weng, Chengxian;Liu, Wenwu
    • Geomechanics and Engineering
    • /
    • 제28권3호
    • /
    • pp.265-281
    • /
    • 2022
  • A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

2-차원 MMFF 모델을 이용한 2-계층 부호화 영상 트래픽의 모델링 및 성능 분석 (2-D MMFF Model and Performance Analysis of 2-layer coded Video Traffic Sources)

  • 안희준;노병희;김재균
    • 한국통신학회논문지
    • /
    • 제21권1호
    • /
    • pp.17-32
    • /
    • 1996
  • In this paper, a model for two-layered video traffic is proposed. The performance analysis of the proposed model and the effects of two-layer coding scehemes in ATM networks are also studied. ATM-based networks give the possibility to support image codingat variable bit rate(VBR). Two layer coding is one of the very promising methods among many proposed methods to compensate the cell loss, the major drawback in ATM networks. From the experimental data of the 2-layer coded video traffics, it is observed that traffic patterns of base layer and enhanced layer are highly correlate to each other, when constant image quality is kept. With this observation, coded two layered video traffic can be modeled as 2-dimensional Markov chain. The model well fit the real experimental data. The model was used for the analysis of the performance of statistical multiplexer with priorites in ATM networks.

  • PDF

Adaptable Online Game Server Design

  • Seo, Jintaek
    • Journal of information and communication convergence engineering
    • /
    • 제18권2호
    • /
    • pp.82-87
    • /
    • 2020
  • This paper discusses how to design a game server that is scalable, adaptable, and re-buildable with components. Furthermore, it explains how various implementation issues were resolved. To support adaptability, the server comprises three layers: network, user, and database. To ensure independence between the layers, each layer was designed to communicate with each other only via message queues. In this architecture, each layer can have an arbitrary number of threads; thus, scalability is guaranteed for each layer. The network layer uses input/output completion ports(IOCP), which shows the best performance on the Windows platform, it can handle up to 5,000 simultaneous connections on a typical entry-level computer, despite being built with a single-threaded user layer. To completely separate the database from the game server, the SQL code was not directly embedded in the database layer.

트랜스포트 계층과 네트워크 계층 이동성 관리 방안들의 성능비고 (Performance Comparison of Transport vs. Network Layer Mobility Management Mechanisms)

  • 장문정;이미정
    • 한국정보과학회논문지:정보통신
    • /
    • 제33권1호
    • /
    • pp.28-37
    • /
    • 2006
  • 최근 새로운 트랜스포트 계층 프로토콜인 SCTP를 기반으로 한 트랜스포트 계층 이동성 지원방안이 제안되었다. 본 논문에서는 이들 트랜스포트 계층 이동성 지원 방안이 지금까지 제안되어 온 대표적인 IPv6 기반 네트워크 계층에서의 이동성 지원 방안들에 비하여 어느 정도의 성능을 보이는지 그 위치를 가늠해 보고, 이들 각 프로토콜이 수반하는 오버헤드를 비교하였다 시뮬레이션 결과를 통하여 트랜스포트 계층에서의 종단 간 이동성 지원 방안이 네트워크 계층 이동성 지원 방안들이 수반하는 오버헤드보다 더 낮은 오버헤드를 가지며 전송 성능이나 핸드오버 지연 측면에서 MIPv6와 유사하거나 더 좋은 성능을 보임을 알 수 있었다.

IP기반 차세대 무선 네트워크에서의 교차계층 핸드오프 기법의 성능 분석 (Performance Analysis of Cross-Layer Handoff Scheme in IP-Based Next-Generation Wireless Networks)

  • 이재숙;정종필
    • 한국통신학회논문지
    • /
    • 제38B권6호
    • /
    • pp.454-472
    • /
    • 2013
  • 무선 네트워크의 사용이 모바일 사용자로 점점 확대되고 무선 네트워크 기술의 발달로 다양한 무선 네트워크 시스템이 생겨났다. 무선 네트워크 시스템들은 중첩되어 있을 수 있으며 네트워크 간 전환을 필요로 한다. NGWN(Next Generation Wireless Networks)은 다양한 무선 네트워크를 통합하여 사용자에게 넓은 커버리지 영역과 최적화된 서비스를 제공한다. 기존의 핸드오프 관리 프로토콜은 NGWN의 응용프로그램에 핸드오프 지원을 보장하기에 충분하지 않다. CLH(Cross-Layer Handoff) 프로토콜 기법은 NGWN의 네트워크 내와 네트워크 간의 효율적인 핸드오프 관리를 위해 개발되었다. CLH은 무선 네트워크 환경에서 이동성관리를 지원하고 핸드오프 성능향상을 위해 모바일의 속도와 핸드오프 시그널링 지연 정보를 이용한다. 본 논문에서는 핸드오프 성능 분석을 위해 링크계층 및 네트워크계층의 민감도를 분석하고 이것을 기반으로 CLH 기법을 제안한다. CLH가 네트워크 내와 네트워크 간 핸드오프의 성능 향상을 높여준 다는 것을 본 논문의 다양한 이론적 분석을 통하여 평가하고 분석한다.