• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.158-170
• /
• 2004

Mobile IP is a base protocol to support host mobility in IP-based wireless network. It is well known that the protocol contains two main delay factors on a handoff process; one is to detect a host movement, and the other is to register the host's current location to its home network. This paper examines Layer 2(L2) handoff procedure in the IEEE 802.11 Wireless LAN, and identifies these L2 triggers that can be usefully applied to Layer 3(L3) handoff. Then, the MCAA(Multiple-Casting using Anchor Agent) mechanism is proposed. It makes use of the L2 trigger and the network topology to construct an anchor agent dynamically, and the multiple-casting scheme to prevent an ongoing packet to be lost. Using a network simulator, the proposed mechanism has been evaluated the handoff delay and the packet lost point of view, in comparison with the regional registration protocol which is the most well known micro mobility support mechanism.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2011

It is believed that the anomalies or diseases of human organs are identified by the analysis of the patterns. This paper proposes a new classification technique for the identification of cancer disease using the proteome patterns obtained from two-dimensional polyacrylamide gel electrophoresis(2-D PAGE). In the new classification method, three different classification methods such as support vector machine(SVM), multi-layer perceptron(MLP) and k-nearest neighbor(k-NN) are extended by multi-boosting method in an array of subclassifiers and the results of each subclassifier are merged by ensemble method. Genetic algorithm was applied to obtain optimal feature set in each subclassifier. We applied our method to empirical data set from cancer research and the method showed the better accuracy and more stable performance than single classifier.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.652-655
• /
• 2002

The next generation Internet Protocol IPv6 that is appeared to solve the exhausting problem is now widely deployed in a testbed or commercial site. To successfully deploy IPv6, interoperation with exist IPv4 hosts and routers and interactions with many IPv4 applications are more important. The NAT-PT (Network Address Translation-Protocol Translation) among IPv6 transition mechanism enables the communication between IPv4 and IPv6 host with translating IPv4 address and IPv6 address. But for DNS and FTP, another specific mechanism is needed when internet address is included in packet payload area. This paper describes the design and implementation of IPv6-support FTP-ALG, (Application Layer Gateway) to enable FTP service between IPv4 node and IPv6 node.

• Composites Research
• /
• v.13 no.4
• /
• pp.33-41
• /
• 2000

In this research, the mathematical modeling of the formation of SiC layer on the activated carbon was studied to improve the durability and the oxidation resistance of catalyst supports. SiC layer on the activated carbon was formed by permeating SiC from dichlorodimethylsilane(DDS) into pores and depositing while the porous structure was kept. The best conditions of manufacturing the support were found by studying the characteristics of SiC/C which was modelled under various deposition conditions. Changes of the amount of deposition, the pore diameter, the surface area with time were obtained by simulating convection, diffusion and reaction in an isothermal reactor at a steady state. The uniform deposition in the pores of samples was obtained at a lower concentration of the reactant and a lower pressure. Additionally, it was observed that the pore diameter and the surface area have points of inflection at certain times of deposition, because deposition occurred on the inside surface of the pore at first and then on the outside surface of the particle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.86.2-86.2
• /
• 2010

In order to improve polymer electrolyte membrane fuel cell (PEMFC) durability, the durability of membrane electrode assemblies (MEA), in which the electrochemical reactions actually occur, is one of the vital issues. Many articles have dealt with catalyst layer degradation of the durability-related factors on MEAs in relation to loss of catalyst surface area caused by agglomeration, dissolution, migration, formation of metal complexes and oxides, and/or instability of the carbon support. Degradation of catalyst layer during long-term operation includes cracking or delamination of the layer which result either from change in the catalyst microstructure or loss of electronic or ionic contact with the active surface, can result in apparent activity loss in the catalyst layer. Membrane degradation of the durability-related factors on MEAs can be caused by mechanical or thermal stress resulting in formation of pinholes and tears and/or by chemical attack of hydrogen peroxide radicals formed during the electrochemical reactions. All of these effects, the mechanical damage of membrane and degradation of catalyst layers are more facilitated by uneven stress or improper MEA fabrication process. In order to improve the PEMFC durability, therefore, it is most important to minimize the uneven stress or improper MEA fabrication process in the course of the fabrication of MEA. We analyzed the effects of the MEA fabrication condition on the PEMFC durability with MEA produced using CCM (catalyst coated membrane) method. This paper also investigated the effects of MEA fabrication condition on the PEMFC durability by adding additional treatment process, hot pressing and pressing, on the MEA produced using CCM method.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.63-69
• /
• 2006

Recently there are increasing needs for Internet and various kinds of contents. These traffics for various contents need more amount of data to provide high-quality information and require various QoS depending on the characteristics of contents. However, current Internet service supports BE (Best Effort) service only, therefore IntServ (Integrated Service) scheme and DiffServ (Differentiated Service) scheme are represented to support QoS in IP layer. Moreover, while wireless Internet is getting popular, MAC(Medium Access Control) is also becoming important. This is due to the fact that wireless access, resource allocation and packet scheduling, which are done in another layers before, are performed in MAC layer in many new wireless systems. This paper describes new scheme that provides QoS taking into account the traffic characteristics over Mobile IPv6 network based on IEEE 802.11e EDCF and evaluates the performance through computer simulation.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.524-532
• /
• 2002

With the recent rapid progress of Internet, the higher speed network is needed to support the exploration of ambient information from text-based to multimedia-based information. Also, demands for additional Layer 3 routing technique, such as Network Address Translator (NAT) and Firewall, are required to solve a limitation of a current Internet address space and to protect the interior network from the exterior network. However, current router-based algorithms do not provide mechanisms to solve the congestion and fairness problems, while supporting the multimedia services and satisfying the user requirements. In this paper, to solve these problems, a new active queue management, called MFRED (Multiple Fairness RED) algorithm, is proposed. This algorithm can efficiently reduce the congestion in a router or gateway based on the Layer 3 routing technique, such as NAT. This algorithm can improve the fairness among TCP-like flows and unresponsive flows. It also works well in fairly protecting congestion-sensitive flows, i.e. fragile TCP, from congestion-insensitive or congestion-causing flows, i.e. robust TCP.

• Journal of KIISE:Databases
• /
• v.31 no.1
• /
• pp.1-12
• /
• 2004

As network systems are developed rapidly and network architectures are more complex than before, it needs to use PBNM(Policy-Based Network Management) in network system. Generally, architecture of the PBNM consists of two hierarchical layers: management layer and enforcement layer. A security policy server in the management layer should be able to generate new policy, delete, update the existing policy and decide the policy when security policy is requested. And the security policy server should be able to analyze and manage the alert messages received from Policy enforcement system in the enforcement layer for the available information. In this paper, we propose an alert analyzer using data mining. First, in the framework of the policy-based network security management, we design and implement an alert analyzes that analyzes alert data stored in DBMS. The alert analyzer is a helpful system to manage the fault users or hosts. Second, we implement a data mining system for analyzing alert data. The implemented mining system can support alert analyzer and the high level analyzer efficiently for the security policy management. Finally, the proposed system is evaluated with performance parameter, and is able to find out new alert sequences and similar alert patterns.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.497-507
• /
• 2018

Tactical networks are evolving into an All-IP based network for network centric warfare(NCW). Owing to the flexibility of IP based network, various military data applications including real-time and multi-media services are being integrated in tactical networks. Because each application has diverse Quality-of-service(QoS) requirements, it is crucial to develop a QoS provisioning method for guaranteeing QoS requirements efficiently. Conventionally, differentiated services(DiffServ) have been used to provide a different level of QoS for traffic flows. However, DiffServ is not designed to guarantee a specific requirement of QoS such as delay, loss, and bandwidth. Therefore, it is not suitable for military applications with a tight bound of QoS requirements. In this paper, we propose a multi-layer network virtualization scheme that allocates traffic flows having different QoS requirements to multiple virtual networks, which are constructed to support different QoS policies such as virtual network functions(VNFs), routing, queueing/active queue management(AQM), and physical layer policy. The experiment results indicate that the proposed scheme achieves lower delays and losses through multiple virtual networks having differentiated QoS policies in comparison with conventional networks.