• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.120-122
• /
• 1998

현재 상업화되어있는 RO membrane으로는 크게 asymmetric membrane과 composite membrane으로 구분될 수 있다. Asymmetric membrane의 소재로는 Cellulose acetate나 Cellulose triacetate와 같은 것들이 사용되며 현재에도 많이 사용되고 있으나, 보다 더 우수한 성능을 갖는 분리막을 제조하기 위해 현재에는 주로 composite membrane 형태로 제조된다. 대부분의 composite membrane은 계면중합에 의해 제조되는데 대표적인 membranem으로는 FT-30이 있다. 이 밖에도 support의 표면을 직접 플라즈마 처리하여 복합막을 제조하는 공정이 있으며 polyactrylonitrile과 같은 membrane이 이에 속한다. 플라즈마 처리된 복합막은 처리 대상에 크게 영향을 받지 않고 support 표면에 crosslinking의 형태로 형성되기 때문에 active layer가 매우 안정하며 따라서 우수한 물리화학적 성질을 기대할 수 있다. 이밖에도 분리막 표면을 친수성 단량체로 플라즈마 처리함으로써 분리막 표면에 친수성을 부여하거나 관능기를 도입함으로써 불활성 표면을 활성화 시킬 수도 있는 등의 여러가지 장점을 가지고 있다.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.91-99
• /
• 2019

An innovative tone modeling framework based on deep neural networks in tone recognition was proposed in this paper. In the framework, both the prosodic features and the articulatory features were firstly extracted as the raw input data. Then, a 5-layer-deep deep belief network was presented to obtain high-level tone features. Finally, support vector machine was trained to recognize tones. The 863-data corpus had been applied in experiments, and the results show that the proposed method helped improve the recognition accuracy significantly for all tone patterns. Meanwhile, the average tone recognition rate reached 83.03%, which is 8.61% higher than that of the original method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.67-78
• /
• 2013

In this paper, We proposed an development method of application framework for using the precision time protocol(PTP) based on physical layer devices to synchronize clocks across a network with IEEE1588 capable devices. The algorithm was not designed as a complete solution across all conditions, but is intended to show the feasibility of such a for the PTP(Precision Time Protocol) based on time synchronization of heterogeneous network between devices that support in IEEE 1588 Standard application framework. With synchronization messages per second, the system was able to accurately synchronize across a single heavily loaded switch. we describes a method of synchronization that provides much more accurate synchronization in systems with larger networks. In this paper, using the IEEE 1588 PTP support for object-oriented modeling techniques through the 'application framework development Development(AFDM)' is proposed. The method described attempts to detect minimum delays, or precision packet probe and packet metrics. The method also takes advantage of the Tablet PC(Primary to Secondary) clock control mechanism to separately control clock rate and time corrections, minimizing overshoot or wild swings in the accuracy of the clock. We verifying the performance of PTP Systems through experiments that proposed method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.140-153
• /
• 2005

During the tunnel construction the major failure mode can be categorized as: tunnel failure just after the tunnel excavation without support, failure after application of shotcrete and finally failure after setting the concrete lining. The failure mode just after the tunnel excavation without support, can be further classified as : bench failure, crown failure, face failure, full face failure, failure due to weak strata and failure due to overburden. Moreover the failure after application of shotcrete is classified as heading face failure, settlement of shotcrete support, local failure of shotcrete lining and invert shotcrete. To find out the major causes of tunnel collapse, the investigation was done in case of the second phase of Seoul subway construction. The investigation results depicted that the major causes of tunnel collapse were due to the weak layer of rock/fault and sudden influx of ground water from the tunnel crown. While the investigation results of the mountain road tunnels construction have shown that the major causes of tunnel failure were inadequate analysis of tunnel face mapping results, intersection of faults and limestone cavities. In this paper some recent measurement in order to mitigate such tunnel collapse are presented

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.166-166
• /
• 2013

Mesoporous $SiO_2$-supported Ni catalysts (Ni/$SiO_2$ and Ni/$TiO_2$/$SiO_2$) were fabricated by atomic layer deposition (ALD), and their catalytic activity and stability were investigated in carbon dioxide reforming of methane (CRM) reaction at $800^{\circ}C$ The Ni/$SiO_2$ catalysts showed high stability as a result of confinement of Ni particles with a mean size of ~10 nm within the pores of $SiO_2$ support. Besides, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that the Ni nanoparticles were partially buried inside the $SiO_2$ support. The strong interaction between Ni and the $SiO_2$ support could also be advantageous for long-term stability of the catalyst. In case of the Ni/$TiO_2$/$SiO_2$ catalyst, it was found that the catalytic activity of 10 nm-sized Ni nanoparticles was not much influenced by $TiO_2$ addition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.1
• /
• pp.16-27
• /
• 2012

In multi-interface multi-channel(MIMC) based tactical ad hoc networks, QoS support for required operational capacity is one of the main challenging issues for multi-hop transmissions. To support QoS in such a harsh environment, we propose a novel MAC scheme to minimize multi-hop as well as per-hop delay. The current IEEE 802.11 MAC protocols should contend to reserve the channel resource at every hop by each sender. The every-hop channel contention results in a degradation of end-to-end delay for multi-hop transmissions. The basic idea of our scheme is to make a "multi-hop reservation" at the MAC layer by using the modified RTS frame. It contains additional information such as destination information, packet priority, and hop count, etc. In addition, we differentiate the contention window area according to the packet priority and the number of hops to deliver packets in the predefined allowed latency. Our scheme can minimize the multi-hop delay and support the QoS of the critical data in real time(i.e., VoIP, sensing video data, Video conference between commanders). Our simulation study and numerical analysis show that the proposed scheme outperforms the IEEE 802.11 MAC.

• ETRI Journal
• /
• v.22 no.3
• /
• pp.41-51
• /
• 2000

An important use of data warehousing is to provide temporal views over the history of source data. It is significant that nearly all data warehouses are dependent on relational database technology, yet relational databases provide little or no real support for temporal data. Therefore, in is difficult to obtain accurate information for time-varying data. In this paper, we are going to design a temporal data warehouse to support time-varying data efficiently. For this purpose, we present a method to support temporal query by combining a temporal query process layer with the relational database which is used as a source database in an existing data warehouse. We introduce the Temporal Aggregate Tree Strategy (TATS), and suggest its algorithm for the way to aggregate the time-varying data that is changed by the time when the temporal view is created. In addition, The TATS and the materialized view creation method of the existing data warehouse have been evaluated. As a result, the TATS reduces the size of the fact table and it shows a good performance for the comparison factor in case of processing the query for time-varying data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5436-5458
• /
• 2017

Automatic Video Surveillance System (AVSS) has become important to computer vision researchers as crime has increased in the twenty-first century. As a new branch of AVSS, baggage detection has a wide area of security applications. Some of them are, detecting baggage in baggage restricted super shop, detecting unclaimed baggage in public space etc. However, in this paper, a detection & classification framework of baggage is proposed. Initially, background subtraction is performed instead of sliding window approach to speed up the system and HSI model is used to deal with different illumination conditions. Then, a model is introduced to overcome shadow effect. Then, occlusion of objects is detected using proposed mirroring algorithm to track individual objects. Extraction of rotational signal descriptor (SP-RSD-HOG) with support plane from Region of Interest (ROI) add rotation invariance nature in HOG. Finally, dynamic human body parameter setting approach enables the system to detect & classify single or multiple pieces of carried baggage even if some portions of human are absent. In baggage detection, a strong classifier is generated by boosting similarity measure based multi layer Support Vector Machine (SVM)s into HOG based SVM. This boosting technique has been used to deal with various texture patterns of baggage. Experimental results have discovered the system satisfactorily accurate and faster comparative to other alternatives.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.2
• /
• pp.202-209
• /
• 2020

In methanol steam reforming, commercial catalysts in the form of pellets are mainly used, but there are limitations to directly apply them to underwater weapon systems that require shock resistance and heat transfer characteristics. In this study, to overcome this problem, a multi-layer cup structure (MLCS) was applied to support a pellet type catalyst. The characteristics of pellet catalyst supported by MLCS and the pellet catalyst supported by conventional structure (CS) were compared by the reforming experiment. In the case of MLCS, a high methanol conversion rate was shown in the temperature range 200 to 300℃ relative to the CS manufactured with the same catalyst weight as MLCS. CS shown similar characteristics to MLCS when it manufactured in the same volume as MLCS by adding an additional 67% of the catalyst. In conclusions, MLCS can not only reduce catalyst usage by improving heat transfer characteristics, but also support pellet catalyst in multiple layers, thus improving shock resistance characteristics.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.1
• /
• pp.11-22
• /
• 2015

Pd alloy hydrogen membranes for hydrogen purification and separation need thermal stability at high temperature for commercial applications. Intermetallic diffusion between the Pd alloy film and the porous metal support gives rise to serious problems in long-term stability of Pd alloy membranes. Ceramic barriers are widely used to prevent the intermetallic diffusion from the porous metal support. However, these layers result in poor adhesion at the interface between film and barrier because of the fundamentally poor chemical affinity and a large thermal stress. In this study, we developed Pd alloy membranes having a dense microstructure and saturated composition on modified metal supports by advanced DC magnetron sputtering and heat treatment for enhanced thermal stability. Experimental results showed that Pd-Cu and Pd-Ag alloy membranes had considerably enhanced long-term stability owing to stable, dense alloy film microstructure and saturated composition, effective diffusion barrier, and good adhesive interface layer.