• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.186-193
• /
• 2001

In the high pressure state, the leakage flow rate of hydraulics is one of serious problems and the great reason to decrease the volume efficiency. In this paper, I tried to clarify tribology characteristics for the slipper hydrostatic bearing in swash plate type axial piston pumps and motors by means of experiment . I measured the leakage flow rate between swash plate and piston shoe with change the supply pressure and oil temperature at a swash plate angle of 0。 . And I also investigated the slipper pocket pressure and calculated oil film thickness for theoretical method. So. 1 have analyzed the tribology characteristics of hydrostatic bearing for leakage flow rate and oil film thickness with oil temperature and supply pressure.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.3
• /
• pp.131-140
• /
• 2002

Today's environment of enterprise is changing, They have to face customer' demands with the right product, the right service and supply them at the right time. And also cut down logistics and inventory cost and bring up the profit as much as they can. This means the change of putting enterprise first in importance to putting customer first importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management. In this paper, It consolidates the necessity on a LTV(Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV(Life Time Value) rule that can improve the customer value. We solved this problems using AHP(Analytic Hierarchy Process) for consistency at relationship matrix, AHP(Analytic Hierarchy Process) is based on Saaty's consistency rate. If consistency rate is under 0.1 point, preference rate's weights are acceptable. This study develop a program for AHP weights and support Satty's consistency rate.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1560-1561
• /
• 2006

A high rate deposition sputtering process of magnesium oxide thin film in oxide mode has been developed using a 20 kW unipolar pulsed power supply. The power supply was operated at a maximum constant voltage of 500 V and a constant current of 40 A. The pulse repetition rate and the duty were changed in the ranges of $10{\sim}50\;kHz$ and $10{\sim}60%$, respectively. The deposition rate increased with rising incident power to the target. Maximum incident power to the magnesium target was obtained by the control of frequency, duty and current. The deposition rate of a moving state was 9 nm m/min at the average power of 1.5 kW.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1227-1233
• /
• 2004

Air handling unit (AHU)'s air filter pressure difference is important for energy consumption and indoor air quality. Both energy Performance data and air filter differential pressure of AHU in real office buildings were monitored and analyzed to investigate quantitatively energy impact as dust buildup level on air filter grows. We also modeled and simulated CAV system using HVACSIM＋ program to examine the energy effect of dust buildup on filters. Through analysis of time series pressure drop data, the filter pressure difference rate has been increased due to cumulative supply air flow rate increase. As filter pressure drop increased to 1 inch water column, it is found that the supply air flow rate was decreased by 10%, the chilled water flow rate was increased by 5.9% and the pump energy consumption was increased to 5.9%.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.108-115
• /
• 2004

Experiment and analytical studies on the oil supply characteristics of scroll compressor have been presented. For a scroll compressor, oil supply system consisting of individual lubricating element such as pumps, oil passages and sliding surfaces has been modeled by equivalent electric circuit. By solving the closed network equations of the model, oil flow rates at various lubrication elements could be obtained. Total amount of the oil flow rate drawn into the shaft has been measured and compared reasonably well with the prediction by the numerical simulation.

• Journal of the Korean housing association
• /
• v.11 no.4
• /
• pp.53-63
• /
• 2000

The study focuses on the problems of store space supply in apartment sites and suggests policy directions for the problem. Based on the results of field survey and site reconnaissance, this study identifies following problems and policy directions. First, the stores do not meet consumers various demand due to item limitations with small size. Consequently, there are many closed and/or unsold stores with high vacancy rates, Second, there is a tendency that the closed store rate becomes higher as apartment size becomes smaller. We suggest some law and regulation amendment that make store supply optional rather than mandatory in the case of small apartment site construction.

• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.1 s.49
• /
• pp.153-174
• /
• 1995

This study was conducted to examine the determinant factors for expenditure of the medical insurance program for self-employeds based on the analysis of 1991 'The Medical Insurance Program for Self-Employeds Statistical Yearbook', and also similar yearbooks in the metropolitan and other provinces. The major findings are as follows : We have divided benefits into these four components such as the utilization rate for out-patients, expenses per claim for out-patients as paid by the insurer, utilization rate for in-patients, and the expenses per claim for in-patients as paid by the insurer, in order to examine the determinant factors for it. The results of the study revealed the following findings, in urban areas, the supply of medical care had more influence on the benefits than other demographic and economic variables, while, in county areas, both the supply of medical care and the rate of those aged over 65 affected the provision of benefits. The determinant factors for financial balance of the medical insurance program for self-employeds are, first, the determinant factor for administrative expenses was the number of households. The more the number of households, the less the administrative expenses per the insured. This shows that the economy of scale is being. And so, the administrative district must be taken into consideration in the incorporation of small regional medical societies and should be re-organized for more efficient management. Second, in urban areas, the supply of medical care had more influence on utilization rate and expenses per claim as paid by insurer, and therefore it is necessary to control it. In county areas, the supply of medical care and the rate of those aged over 65 raised the utilization rate and expenses per claim as paid by insurer. For the financial stability of county areas, a common fund for medical care for the aged and expansion of finance stabilization fund would be necessary. But, in county areas, it would be unnecessary to control the supply of medical care because it was much more insufficient than in urban areas. The vitalization of public health facilities must be carried out in county areas, for they reduced benefits. Sice the more insured in a single household, the less the utilization of the medical insurance program, benefits for habilitation at home should be given consideration. The law of majority and the economy of scale were applied here, and therefore the incorporation of regional medical societies must be taken into consideration. In integrating regional medical societies, it would be absolutely necessary to review the structural differences among all regional medical societies, the medical demand of each region, and also the local characteristics of each region.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.88-88
• /
• 2003

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.1
• /
• pp.38-49
• /
• 2016

This paper proposes a mathematical model-based solution for sourcing decisions with an objective of minimizing the manufacturer's total cost in the two-echelon supply chain with supply capacity risk. The risk impact is represented by uniform, beta, and triangular distributions. For the mathematical model, the probability vector of normal, risk, and recovery statuses are developed by using the status transition probability matrix and the equations for estimating the supply capacity under risk and recovery statuses are derived for each of the three probability distributions. Those formulas derived are validated using the sampling method. The results of the simulation study on the test problem show that the sourcing decisions using the proposed solution reduce the total cost by 1.6~3.7%, compared with the ones without a consideration of supply capacity risk. The total cost reduction increases approximately in a linear fashion as the probability of risk occurrence or reduction rate of supply capacity due to risk events is increased.