• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.250-256
• /
• 2013

Gasoline generates organic acid and polymer (gum) by hydrocarbon oxidation depending on the storage environment such as temperature and exposure to sunlight, which can cause metal corrosion, rubber and resin degradation and vehicle malfunction caused by accumulation in fuel supply system. The gasoline which has not been used for a long time in bi-fuel (LPG-Gasoline) vehicle causes problems, and low octane number gasoline have evaporated into the field, but the exact cause has not been studied yet. In this study, we suggest a plan of quality management by investigating the gasoline oxidation behavior. In order to investigate the oxidation behavior of gasoline, changes of gasoline properties were analyzed at various storage conditions such as storage time, storage vessel type (vehicle fuel tank, PE vessel and Fe vessel) and storage circumstances (sunlight exposure and open system, etc.). Currently distributing gasoline and bioethanol blended fuel (blended 10%) were stored for 18 weeks in summer season. The sample stored in PE vessel was out of quality standard (octane number, vapor pressure, etc.) due to the evaporation of the high octane number and low boiling point components through the vessel cap and surface. Especially, the sunlight exposure sample stored in PE vessel showed rapid decrease of vapor pressure and increase of gum. Bioethanol blended fuel showed similar results as gasoline.

• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.259-267
• /
• 2012

Biomass changes, net primary production and transfer dynamics of dry matter in four subtropical humid montane grasslands at Ebbenadu, Korakundah, Thiashola and Wenlockdown in Nilgiri Biosphere Reserve (NBR), the Western Ghats, India, were investigated. Despite the early report of a higher density and dominance of $C_4$ species over $C_3$ species in these grasslands, no functional study of matter production had previously been carried out. Therefore, in order to determine the roles played by these two groups of species, the present study was attempted. The study revealed that the dry matter and net primary production contributed by $C_4$ species were much greater than those of its $C_3$ counterpart in all the grasslands. The turnover rate of aboveground dry matter for both $C_3$ and $C_4$ species was generally rapid, whereas it was slow for belowground parts, and litter components of $C_3$ and $C_4$ species together. In all grasslands, generally about 60% and 10% of the input were channeled to aboveground and belowground parts, respectively, by the $C_4$ species, whereas the $C_3$ species transferred only about 22% and 8% of dry matter to aboveground and belowground parts, respectively. The total disappearance of dry matter was 2.73, 2.10, 3.19, and $1.96\;g\;m^{-2}\;day^{-1}$ in Ebbenadu, Korakundah, Thiashola and Wenlockdown grasslands, which was 48.83%, 44.30%, 54.81%, and 41.09% of the total input, respectively, in these grasslands. This resulted in a considerable surplus dry matter production in all the grasslands studied. This balance sheet of dry matter in community function indicates that all the four studied grasslands were supporting the existing wild animals adequately in terms of pasture supply. The study further revealed that the stronger establishment of $C_4$ species rather than their $C_3$ counterparts, in terms of higher density and dominance, has driven them to play major roles in matter dynamics and system transfer functions in all the four grasslands studied. This fact evidenced that pasture from $C_4$ species for wild animals was determined to be higher in comparison to that of $C_3$ species.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2020

This paper proposes a 2-kW solid-state power amplifier (SSPA) developed by employing power amplifier pallets designed using gallium-nitride high electron mobility transistors, which is used in S-band military radars and to replace existing traveling-wave tube amplifier (TWTA). The SSPA consists of a high-power amplifier module, which combines eight power amplifier pallets, a drive amplifier module, a digital control module, and a power supply unit. First, the amplifier module and component were integrated into a small package to account for space limitations; next, an on-board harmonic filter was fabricated to reject spurious components; and finally, an auto gain control system was designed for various duty ratios because recent military radar systems are all active phase radars using the pulse operation mode. The developed SSPA exhibited a max gain of 48 dB and an output power ranging between 63-63.6 dBm at a frequency band of 3.1 to 3.5 GHz. The auto gain control function showed that the output power is regulated around 63 dBm despite the fluctuation of the input power from 15-20 dBm. Finally, reliability of the developed system was verified through a temperature environment test for nine hours at high (55 ℃) / low (-40℃) temperature profile in accordance with military standard 810. The developed SSPA show better performance such as light weight, high output, high gain, various safety function, low repair cost and short repair time than existing TWTA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.56-66
• /
• 2021

In this study, a waste heat recovery system was devised and the performances of components incorporated to recover the heat generated during the processing of aerobic liquid-composting in a livestock manure treatment facility were analyzed. In addition, the availability of recovered heat was confirmed. The heat generated by liquid fermentation in the livestock manure treatment facility was also checked. Experimental temperatures were set at 35, 40, and 45 ℃ based on considerations of the uniformity of aerobic liquid-composting fermentation tank temperature and its operating range (34.5 ~ 43.9 ℃). Recovered heat energies from the combined heat exchanger, which consisted of PE and STS pipes, were 53.5, 65.6, 74.4 MJ/h, The heat pump of capacity 5 RT was heated at 95.6, 96.1, 98.9 MJ/h and the heating COPs of the pump were 4.53, 4.62, and 4.65, respectively. The maximum hot water production capacity of the heat exchanger assuming a fermentation tank temperature of 45 ℃ confirmed an energy supply of 56 360 kcal/day. The heating capacity of the FCU linked to the heat storage tank was 20.8 MJ/h, and the energy utilization efficiency was 96.1%. When livestock manure was dried using the FCU, it was confirmed that the initial function rate was reduced by 50.5 to 45.8 % after drying.

• Journal of the Korea Society for Simulation
• /
• v.31 no.1
• /
• pp.29-41
• /
• 2022

As one of the alternatives to solve the problem of unstable food supply and demand imbalance caused by abnormal climate change, the need for plant factories is increasing. Airflow in plant factory is recognized as one of important factor of plant which influence transpiration and heat transfer. On the other hand, Digital Twin (DT) is getting attention as a means of providing various services that are impossible only with the real system by replicating the real system in the virtual world. This study aimed to develop a digital twin model for airflow prediction that can predict airflow in various situations by applying the concept of digital twin to a plant factory in operation. To this end, first, the mathematical formalism of the digital twin model for airflow analysis in plant factories is presented, and based on this, the information necessary for airflow prediction modeling of a plant factory in operation is specified. Then, the shape of the plant factory is implemented in CAD and the DT model is developed by combining the computational fluid dynamics (CFD) components for airflow behavior analysis. Finally, the DT model for high-accuracy airflow prediction is completed through the validation of the model and the machine learning-based calibration process by comparing the simulation analysis result of the DT model with the actual airflow value collected from the plant factory.

• Cartoon and Animation Studies
• /
• s.34
• /
• pp.317-344
• /
• 2014

Perspectives on the basis of arts and cultural management, this study intends to suggest improvements in core curriculums that are required in order for South Korea, a country that has initiated into the animation industry through outsourcing from big-budget animation production countries such as America and Japan, to develop its own strong base in creative animation industry. The perspectives of arts management in this context means an integration nexus between human studies, social science and management, and suggestions are as follow: First, it is crucial to understand the current trend of animation industry structure across the globe, as well as to develop the ability of co-production. Animation industry often requires technical skills, capital strength and human resources, each having equal importance. Therefore, thorough analysis of the three components in worldwide animation industry must be preceded for animation production services. To do so, collaboration with major animation creation countries is the best option and is highly encouraged, so that the national animation curriculum shall be enhanced to meet such demands and hence develop various abilities. The second is a good understanding of new-media and new-platforms. Not only the traditional distributor of animation such as television and theater, the distribution system expands its scope to a variety of online sources including pod-casts and the Internet. Under these circumstances, a deep understanding towards animation distribution system and an analysis of the new consumer channel are also of paramount importance for animation production. Third, a possibility of animation supply chain through diversified routes and media have paved the way for a possible animation production services and distribution without a mega-budget. Thus, new curriculum shall need to reinforce marketing and management aspects that will in turn help individuals to establish a self-employed creative business. Last but not least, this study further includes illustration of current curriculum of animation studies in national universities, followed by detailed suggestions for the curriculum improvements based on the above mentioned three factors. It was observed that the current curriculums have been solely focused on practical works and technical skills of animation and art studies; a four-year-course colleges that provide animation courses usually lack components of human studies, social science and management. Thus, this study proposes essential contexts of management studies that are needed for individual business and also curriculum improvements that are derived from the analysis of the current industry and the new media.

• The Korean Nurse
• /
• v.32 no.5
• /
• pp.66-77
• /
• 1994

The purpose of this study was to develop a new nursing unit which can meet changing health care needs, enhance patients' satisfaction and nurses' job satisfaction, and finally guarantee quality nursing care with present manpower. For this, one medical unit was selected as a unit for quality care. And one medical unit which is similar in staffing and patients' characteristics was selected as a control unit. To assess present problems and identify the remedies to the problems a hospital-wide survey and a workshop were performed. According to the survey results, educational programs and improvement of the facilities and equipment supply system, managereal support for interdepartmental cooperation and intensification of bed-side nursing care were adopted as main principles for operating model unit, This model unit was operated for 3 months from Sep. 1, 1992 to Nov. 30, 1992. To evaluate the effectiveness of the model unit, derect/indirect nursing care hours, patients' satisfaction to nursing care, nurses' job satisfaction, and quality care index were measured. Direct/indirect nursing care hours were compared with that of the control unit, and patients' and nurses' satisfaction and quality care index were measured before and after operating model unit and compared with each other. The results of the study were as follows; 1. In the model unit mean direct nursing care hours per cach shift was 146.88 minutes and indirect nursing care hours was 354.72 minutes. The ratio of the direct nursing care hour to indirect nursing hour was 29.6 ; 70.4 and that of the control unit was 26.9 : 73.1. Direct nursing care hour in model unit was longer than that of the control unit. But, the difference was not significant. In subcategories of direct nursing care, the time spent in mobility and exercise, conservation of body temperature, hygiene, and communication and health education were longer than that of the con" trol unit. 2. Indirect nursing care hour in model unit was shorter than that of the control unit. But, the difference was not significant. In subcategories of indirect nursing care, the time spent in drug management and ward arrangement was shorter than that of the control unit. 3. Patients' satisfaction to nursing care was increased significantly after operating the model unit (T=-3.48, P=-0.002) and satisfaction to subcategories of physical comfort measure, psychological cate, and unit management components were significantly higher than before. 4. In the model unit, nurses' total job satisfaction was increased significantly after operating the model unit(Z=2.1004, P=.0357) and satisfaction to subcategory of satisfaction to administration was significantly higher than before (Z=-2.0732, P=.0382). 5. After operating the model unit, quality care index was increased from 89 to 93. With this results, it can be summarized that all the measures tried for quality care, such as educational programs, managereal support for interdepartmental cooperation, and improvement of the equipment and facility provision resulted in partial increase in direct nursing care hours, nurses satisfaction to their job and patients' satisfaction to nursing care. In can be postulated that managereal support and motivation without proper staff supplementation is not enough for increasing direct nursing care hours. And for the enhancement of the level in clinical nursing, and staff supplement must be considered sincerely and the measures for reducing indirect nursing care hours, such as computerization of nursing care activities, improvement of facilities and equipment and facilities supply system, must be instituted in addition.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.26-35
• /
• 2019

This study aims to introduce and economical review on the possibilities of rare earth elements(REEs) recovery from coal ashes and the analysis of economical evaluation factors based on the data for securing domestic rare earth elements. The cut-off grade of REEs on recovering from coal ash was confirmed to be 1,000 ppm on total rare earth oxides(TREO) basis, and while the economic value of coal ash changed with contents and specific elements of rare earth elements. This shall be resulted in the price differences of rare earth elements required by the current industry, and it probably varies depending on the future demand of rare earth components. For developing of commercial recovery technology on REEs in coal ashes, many researches have been carried out by various analyzing methods, such as evaluation of holding value of REEs in ashes, assessment between supply and demand of industry, comparison of investment and its profitability for the REEs's production from coal ashes, and so on. Although these methods have been suggested, its recovery system with economical feasibility could not been confirmed up to present. In this reason, the process design of recovering REEs from coal ash shall be researched continuously to solve the problems of the global rare earth market. And also these researches shall be conducted actively in Korea for the purpose of securing the REEs resources and their recovering technologies.

• Journal of Environmental Impact Assessment
• /
• v.23 no.2
• /
• pp.75-87
• /
• 2014

In order to analyze environmental impact of livestock manure and organic fertilizers, this study investigated livestock-breeding and pollution loads, the status of individual and public livestock manure treatment facilities, and the status of production, supply and components of compost and liquid fertilizers in the Nonsan area. Also, on a trial basis, this study investigated the life cycle of the environmental impact of livestock manure and its organic fertilizers on stream, groundwater, and agricultural soil. The results are as follows. Firstly, were detected the range of $0.13{\sim}1.32{\mu}g/L$ of As, $0.004{\sim}0.467{\mu}g/L$ of Cd and $0.5{\sim}9.2{\mu}g/L$ of Pb as a harmful substances which show lower concentrations than person preservation criteria of water qualities and aquatic ecosystem. However, it is not clear that heavy metals affect environment such as stream, groundwater and agricultural soil. Secondly, this influence could change according to investigation time and treatment efficiency. As were detected large amounts of persistent organic pollutants(e.g. $14.24{\sim}38.47{\mu}g/L$ of acetylsalicylic acid, $1.17{\sim}2.96{\mu}g/L$ of sulfamethazine, and $2.25{\sim}174.09{\mu}g/L$ of sulfathiazole) in effluent from livestock farms and small amounts of sulfathiazole($ND{\sim}1.63{\mu}g/L$) in the stream, it is necessary to monitor POPs at individual and public livestock manure treatment facilities. However, significant environmental impact did not appear at groundwater and agricultural soil in the test area supplied with liquid fertilizers. These results could be applied to investigate the environmental impact of livestock manure through a comprehensive livestock manure management information system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.3-11
• /
• 2016

In the environment of Internet of Things (IoT), IoT devices are limited by physical components such as power supply and memory, and also limited to their network performance in bandwidth, wireless channel, throughput, payload, etc. Despite these limitations, resources of IoT devices are shared with other IoT devices. Especially, remote management of the information of devices and patients are very important for the IoT healthcare service, moreover, providing the interoperability between the healthcare device and healthcare platform is essential. To meet these requirements, format of the message and the expressions for the data information and data transmission need to comply with suitable international standards for the IoT environment. However, the ISO/IEEE 11073 PHD (Personal Healthcare Device) standards, the existing international standards for the transmission of health informatics, does not consider the IoT environment, and therefore it is difficult to be applied for the IoT healthcare service. For this matter, we have designed and implemented the IoT healthcare system by applying the oneM2M, standards for the Internet of Things, and ISO/IEEE 11073 DIM (Domain Information Model), standards for the transmission of health informatics. For the implementation, the OM2M platform, which is based on the oneM2M standards, has been used. To evaluate the efficiency of transfer syntaxes between the healthcare device and OM2M platform, we have implemented comparative performance evaluation between HTTP and CoAP, and also between XML and JSON by comparing the packet size and number of packets in one transaction.