• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• Journal of Home Health Care Nursing
• /
• v.27 no.2
• /
• pp.137-145
• /
• 2020

Purpose: This study aimed to identify the training system and current status of home health nurses and to examine ways to retain sufficient number of advanced practice nurses (APNs) in the home health nursing field. Methods: This study analyzed the adequacy of the supply of home health nurse by reviewing the existing research literature and statistical data. Results: Discussions on how to revitalize the home care business have been ongoing since the beginning of 2001. However, despite home health nurses being oversupplied, discussions on the adequacy of supply have always been excluded from the focus of revitalization. The recent expansion of the home care business has resulted in a shortage of workforce, which can be inked not only to the continuous reduction of the designated quota of programs but also to the regional imbalance of educational institutions. The serious imbalance between supply and demand has caused fears that the home care business would drastically reduce. Conclusion: It is necessary to not only increase designated quotas for APNs programs but also integrate those programs of the similar curricula, thus lowering supply shortages in home health nurses.

• Korean Management Science Review
• /
• v.30 no.2
• /
• pp.43-61
• /
• 2013

With the recent introduction of supply chain management (SCM), quality management has extended from within companies to between companies. As a result, supply chain quality management (SCQM) has received increased attention. However, existing SCQM studies only focus on what impact quality control in supply chains have on company performance while virtually no studies examine quality control efficiencies. This paper, therefore, evaluated the SCQM efficiency of a parent company and its partner companies by using Data Envelopment Analysis (DEA) based on the Quality Collaboration Index for Supply Chain Management (QCI-SCM) conducted by the Korean Standards Association for its 'Quality Innovation-Based Building and Expansion of Business.' Study results showed that a parent company and its partners showed an overall average efficiency of approximately 80% (parent company 80.37%, partner company 79.05%). By also performing a discriminant analysis based on the calculated efficiency scores using DEA, factors that made companies efficient or inefficient were different between the two groups. In parent companies, efficiency and inefficiency were determined by factors such as communication, infra-structure, support, delivery of quality, and benefit sharing, whereas in partner companies, talent development, infrastructure, crisis management, and delivery of quality were the determining factors. In this paper, we examined the efficiency of SCQM and analyzed them from the perspective of both the parent company and partner companies to offer strategic SCQM insights.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.21-33
• /
• 2011

This paper aims to explore the characteristics of Bogeumjari Housing Program and its significance to housing policy, and propose an appropriate direction of future housing policy for low-income households without home ownership based on actual data on housing careers and preferences of the policy target households. Supply of Bogeumjary Housing is characterized by consolidation of existing housing program, housing support by income level, differentiation of eligible households, and housing subscription on-line. Bogeumjari Housing Program is meaningful in that it is a policy that resumed the supply of permanent housing, provides multi-tier support system by income level, and adjusts the imbalances in housing demand and supply. Despite their strong preferences for Bogeumjari Housing, their affordability is very low due to their low income levels and gloomy outlook for household finances. In this light, the government should pursue housing policies that include not only new housing constructions, but also efficient use of housing stocks, expansion of loans for first-time home buyers, and introduction of home mortgage and housing voucher.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.2
• /
• pp.61-70
• /
• 2008

The purpose of this study is to give some suggestions for the legal supplement of the regulation on the balcony expansion for the optimal use of apartment balcony. For the purpose, this study focused on the characteristics of spaces expanded to the balcony, in the plans supplied after the legalization of balcony expansion, comparing them by their location; the metropolitan area of Seoul Gyeonggi and the districts of the other areas. The 168 plans of apartments in the supplied by top 10 constructors in the metropolitan areas of Seoul and Gyeonggi, together with the 92 plans in the other smaller districts in 2006 to 2007 were analyzed with the tools of frequency and chi-square analysis. The result is as follows. (1) The region showed no difference in the plans of balcony; whereas the size, the position and access of the shelter explained some differences of balcony plan. (2) In wider plans, balconies were placed in all sides of plan-front, rear and side, and were remodeled to expand facing rooms. (3) The balcony expansion tended to increase the number of bays. (4) In almost cases, the living rooms were expanded to balcony. In smaller plans, the balconies were remodeled to supply supplementary kitchen space, splitting it from laundry. (5) The shelters were placed at the rear or side of plans, but the shelter facing room could be dangerous in case of fire. The balcony expansion, despite of legalization spirit to adopt diverse use of additional spaces for residents' needs, was only a tool for the space expansion. The amendment of the regulation is needed to accommodate these findings that the balconies should be identified by their function, that the front corridor-type balcony should be limited in length and magnitude, and that the shelter should be positioned with easy access.

• The Journal of Korean Medicine
• /
• v.20 no.2
• /
• pp.27-36
• /
• 1999

This study was performed to investigate the supply and demand of the oriental medical doctor(OMD) based on the supply and demand analysis of OMD up to the year 1997. The baseline projection and demographic methods were considered to examine the supply of OMD. On the contrary, for the demand analysis, two different approaches were conducted with the nonlinear regression model. The findings of this study indicate that the OMD will be oversupplied before the year 2012 with decreasing rate. However, when we consider the demand of OMD in the future. it is anticipated that the demand of oriental medicine will be increased rapidly with two major aspects. The first is the expansion of insurance benefits. The second is the increasing number of adult diseases because of the aging of the population structure. Therefore, the effective cooperation system and mutual exchange between western and oriental medicine is required for the future. Also. it is necessary to make the oriental medicine of the pharmaceutical services in more scientific way for the appropriate policy of the demand and supply of OMD. For the future study, the students who study abroad, especially China should be considered. These students will be the key element for the future supply of OMD.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.1-6
• /
• 2019

The purpose of the present study is to elucidate flue gas recirculation device for reduction of nitrogen oxides using coanda nozzle without adopting additional power driving fan in a waste incinerator. The characteristics of the exhaust gas recirculation flow rate and the average temperature change at the outlet of the mixed gas were investigated according to the change of air supply nozzle gap and the position of air supply nozzle. When the gap of the air supply nozzle was changed to 3.22, 4.03, and 4.84 mm, the largest recirculation flow ratio, which is the ratio of exhaust gas recirculation flow rate and air supply flow rate, was 2.227 for the case with 3.22 mm and its mean temperature at outlet was $594.8^{\circ}C$. When the position of the air supply nozzle changes to the front position, neck position, and expansion position of the coanda nozzle neck, the recirculation flow ratios at the forward position and the neck position were nearly almost the same value, 1.843, and 1.696 at the expansion position, their mean temperatures were $559.8^{\circ}C$ and $544.3^{\circ}C$, respectively.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.36
• /
• pp.143-170
• /
• 2007

In order to analyze the distribution channel of marine products in Korea, this study shows SCM approach to redesign of the marine distribution channel with case study related to previous literatures. In view of the supply chain and the future impact of RFID on the marine SCM on the recognition of the importance of the seafood traceability system, this study also provides the possibility to accomplish effective SCM for integration of production, storage, transportation, delivery, and sale when RFID is used in the seafood distribution channel based on the expansion of awareness on the marine product traceability. The traceability system for seafood is considered as the distribution infrastructure established in RFID deployment. By introducing Lotte mart case, this case study also discusses the marine distribution structure in view of the supply chain, to present an effective foundation for supplying seafood throughout production, distribution, and consumption. This is achieved by introducing RFID in an ubiquitous environment, and suggesting far more efficient control planning throughout the seafood distribution channel in view of the expected effects resulting from the introduction. In addition, as the alternative of solving this situation, this study propose the supply chain in seafoods by comprehensive management in whole distribution channels. In the SCM in seafood perspectives, HACCP can take into account the whole seafood chain from the point of supply to the point of consumption when assessing hazards. As the contributions of this study, this study emphasizes the seafood industry first should require the establishment of the relevant infrastructure, for which the efforts of the government and demonstrative project participants are essential.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.813-825
• /
• 2019

This paper investigated the effects of a government production and shipment stabilization policy and the improvement plan for vegetables in Korea. In this study, a simulation focused on the changes in farm income for Chinese cabbages & radishes using scenarios. The result shows an increase in farm income according to the government policy. In the short-term, demand and supply are fixed, and the policy effect is positive due to the price support effect of the project. However, for mid- to long-term, the price decreases due to the expansion of supply by business beneficiaries, which is likely to be adversely affected by an unstable supply and demand. This increases the burden of government and local government subsidies. This phenomenon is expected to be amplified as the ratio of production and shipbuilding stabilization programs and items expand. When expanding items and adjusting and setting the percentage of participation in the project, it is desirable to set and operate the appropriate business ratio taking into consideration the demand. To improve the effectiveness of the policy, the following remedies were suggested. First, national supply and demand guidelines should be set up, and the autonomous supply and demand control of the producers should be guided by the different preservation according to the implementation of the supply and demand control obligation. As for detailed equipment, it is necessary to establish the reproduction price for each item, set the base price for each wholesale market, increase the incentive for the producers to participate, and fund a business budget to secure business stability.