• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.889-902
• /
• 2020

본 연구에서는 직접 연결식 초음속 연소기에서 설계점을 만족하는 초음속 유동의 형성유무 및 안정화 소요시간을 확인하기 위한 수치해석이 수행되었다. 이를 위하여 연소식 공기 가열기 하류의 고압 유동이 초음속 연소기로 전파되며 초음속 유동장을 형성해가는 과정을 살펴보았다. 압력 및 온도 분석을 통해, 초음속 유동장이 설계점인 마하수 2.0, 1,000 K을 만족하며, 최소 4.0 ms의 안정화 시간이 필요함을 확인하였다. 따라서 초음속 연소시험에서 연료분사 이전에 유동 안정화에 필요한 시간을 고려해야 함을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.319-322
• /
• 2006

초음속 연소가 성공하려면 1 ms의 시간 안에 충분한 연료-공기 혼합이 이루어져야 한다. 본 실험은 마하 1.92유동에서 헬륨을 수직 분사하여 연료-공기 혼합이 어떻게 이루어지는지 살펴보았다. 평판과 공동 두 가지 모델로 실험을 수행하였고, 슐리렌 가시화를 통해 사진을 찍었다. 압력은 초음속 덕트 내에서 충격파가 어떻게 생성되는지에 영향이 많았고, 침투 거리는 J가 커질수록 두꺼워졌다. 공동이 있는 경우 평판일 때보다 침투 거리가 더 컸다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.42-47
• /
• 2004

Air-fuel mixing and flame-holding are two important factors that have to be considered in the design of an injection system. Different injection strategies have been proposed with particular concern for rapid air-fuel mixing and flame-holding. Two representative injection techniques can be applied in a supersonic combustor. One of the simplest approaches is a transverse(normal) injection. The cavity flame holder, an integrated fuel injection/flame-holding approach, has been proposed as a new concept for flame holding and air-fuel mixing in a supersonic combustor. This paper describes numerical efforts to characterize the flame-holding and air-fuel mixing process of a model scramjet engine combustor, where hydrogen is injected into a supersonic cross flow and a cavity. The combustion phenomena in a model scramjet engine, which has been experimentally studied at University of Queensland and Australian National University using a free-piston shock tunnel, were observed around the separation region of the transverse injector upstream and the inside cavity. The results show that this flow separation generates recirculation regions which increase air-fuel mixing. Self-ignition occurs in the separation-freestream and cavity-fteestream interfaces.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.85-92
• /
• 2004

As a research to develop a SCRAM jet engine is actively conducted, a necessity to produce a high-enthalpy flow in a laboratory is increasing. In order to develop the SCRAM-jet engine, stabilized combustion in a supersonic flow-field should be attained, in which a duration time of flow is extremely short. Therefore, a mixing process of breathed air and fuel, which is injected into supersonic flow-fields is one of the most important problem. Since, the flow inside SCRAM jet engine has high-enthalpy, an experimental facility is required to produce such high-enthalpy flow-field. In this study, a detonation-driven shock tunnel was built and was used to produce high-enthalpy flow. Further-more, SCRAM jet engine model equipped backward-facing step was installed at test section and flow-fields were visualized using color-schlieren technique and high speed video camera. The fuel was injected perpendicular to the flow of Mach number three behind backward-facing step. The height of the step, distance of injection and injection pressure were changed to investigate the effects of step on a mixing characteristic between air and fuel. The schlieren photograph and pressure histories show that the fuel was ignited behind the step.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.318-325
• /
• 2011

이중연소 램제트 엔진의 작동특성 및 주요 설계인자를 파악하기 위하여 공기역학 및 열역학적 이론을 기반으로 한 기본적인 성능해석 모델을 수립하였다. 이중연소 램제트 엔진의 예비 성능해석을 수행하였고, 그 결과는 흡입구, 가스발생기, 초음속 연소기 사이의 상세한 관계를 설명하고 있다. 본 연구에서 제시된 방법은 가스발생기와 초음속 연소기의 기하학적 형상을 정량적으로 결정하고, 엔진 각 구성품의 성능에 대한 영향을 평가하기 위한 도구를 제공한다. 또한 예비 성능해석을 통해 이중 연소 램제트 엔진의 기본 형상 설계 결과를 도출하였다.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.76-87
• /
• 2019

공동형 화염 안정화 장치를 갖는 초음속 연소기를 직접 연결 방식으로 시험을 수행하였다. 고도 20 km, 비행 마하수 4에 해당하는 전온도, 전압력 유동 조건에 대해 액체 탄화 수소 연료를 경사 분사와 공력 램프 분사의 2가지 방법으로 분사하였다. 축방향 벽면 압력과 연소기 출구의 전압력을 계측하여 연료량에 따른 연소 특성을 파악하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.123-132
• /
• 2002

A numerical study was conducted to investigate the combustion phenomena of normal start and unstart processes based on ISL's RAMAC 30 experiments with different diluent amounts and fill pressures in a ram accelerator. The initial projectile launching speed was 1.8 km/s which corresponded to the superdetonative speed of the stoichiometric $H_2/O_2$ mixture diluted with 5 $CO_2$ or 4 $CO_2$. Experiments with same condition except for projectile surface material demonstrated that ignition was successful with an aluminum projectile, but no combustion was observed in case of a steel projectile. In this study, it was found that neither shock nor viscous heating was sufficient to ignite the mixture at a low speed of 1.8 km/s, as was found in the experiments using a steel projectile. However, we could succeed in igniting the mixtures by imposing a minimal amount of additional heat to the combustor section and simulate the normal start and unstart processes found in the experiments with an aluminum projectile. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations coupled with a Baldwin-Lomax turbulence model and detailed chemistry reaction equations of $H_2/O_2/CO_2$ suitable for high-pressure gaseous combustion were considered. The governing equations were discretized by a high order accurate upwind scheme and solved in a fully coupled manner with a fully implicit, time accurate integration method. The numerical results matched almost exactly to the experimental results. As a result, it was found that the normal start and unstart processes depended on the strength of gas mixture, development of shock-induced combustion wave stabilized by the first separation bubble, and its size and location.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.297-299
• /
• 2012

Korea Aerospace Research Institute has been doing researches on the hypersonic propulsion system and hypersonic wind-tunnel since 2000 and started scramjet engine researches from 2005. Total 5 kinds of scramjet engine were designed and tested and two of them were hydrocarbon-fueled scramjet engine. For verifying the own characteristics of each components like the intake and combustor, several component tests were done at the KSPC of JAXA and KARI. In this paper, current scramjet engine research activities of KARI will be described.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.41-41
• /
• 2004

At the University of Queensland (UQ), research into the performance of high-speed (in excess of 7000km/hr) air-breathing engines in the form of supersonic combustion ramjets (or scramjets) has been made for almost 20 years. This has been possible because the T3 and T4 shock tunnels, located at the ANU and UQ, respectively can simulate these conditions. However, like all facilities, there are differences between the flow generated in these facilities and that, which occurs in flight. The correlation between the two has not been determined for these facilities, or indeed for any shock tunnel performing supersonic combustion experiments. The aim of the HyShot flight program is to obtain this correlation by undertaking a sounding rocket program based at Woomera in South Australia. The seminar will discuss new approach taken by the UQ researches in developing this cost effective flight program, as well as the triumphs and disappointments which have been encountered so far in completing this somewhat ambitious program.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.452-455
• /
• 2008

Model Scramjet engine is tested with T4 free-piston shock tunnel at University of Queensland, Australia. Basically, test condition is fixed as Mach 7.6 at 31 km altitude. With this condition, variation effects of fuel equivalence ratio, cavity, cowl setting and angle of attack were investigated. In the results, supersonic combustion was observed with low and middle fuel equivalence ratio. At high equivalence ratio, thermal choking was occurred due to the intensive reaction. Cavity and W-shape cowl showed early ignition and enhanced mixing respectively.