• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.296-301
• /
• 2005

As a new control strategy, the Nonlinear PID (NLPID) controller has been introduced successfully in power systems. The controller is free of planting model groundwork during the design procedure and is therefore able to be achieved quite simply. In this paper, a nonlinear PID controller used for a superconducting magnetic energy storage (SMES) unit connected to a power system is proposed. The purpose of designing such a controller is to improve the stability of the power system in a relatively wide operation range. The design procedure takes into account the active and reactive power cooperative control scheme as well as the simple structure so as to be more apt to practical utilization. Simulation is carried out to investigate the performance of the proposed controller in a high order nonlinear power system model under the. MATLAB environment. The results show satisfactory performance and good robustness of the controller. The feasibility of the controller is testified as well.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.272-275
• /
• 2000

We investigated a resistive superconducting fault current limiter (SFCL) fabricated using YBCO thin films on 2-inch diameter sapphire substrates. Nearly identical SFCL units were prepared and tested. The units were connected in series and parallel to increase the current and voltage ratings. A serial connection of the units showed significantly unbalanced power dissipation between the units. This imbalance was removed by introducing a shunt resistor to the firstly quenched unit. Parallel connection of the units increased the current rating. An SFCL module of 4 units in parallel, each of which has minimum quench current 25 Ap, was produced and successfully tested at a 220 V circuit. From the resistance increase, we estimated that the film temperature increases to 200 K in 5 msec, and 300 K in 120 msec. Successive quenches revealed that this system is stable without degradation in the current limiting capability under such thermal shocks as quenches at 220 V.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.943-944
• /
• 2007

In this paper, the development and the test of 13.2kV/630A high-Tc superconducting fault current limiting coil are described. The fault current limiting coil made of Coated Conductor (CC) was fabricated with bifilar winding method for non-inductive characteristics and tested in the distribution power system level in Dec. 2006. In order to determine the length of the superconducting coil, applied voltage per unit length(V/m) was studied analytically and it was verified through experiments. For the volume minimization, the coil was designed with concentrical arrangement method. The short-circuit test was performed with the prospective fault current of asymmetrical 10kA whose maximum fault current was $30kA_{peak}$. In the test, the voltage drop and the current of the coil were measured and the resistance of the coil was obtained. Also, the temperature rise of the coil was calculated with the relationship between the resistance and the temperature of CC. In this paper, the experimental results are analyzed and compared with the simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.215-215
• /
• 2009

Improved flux-lock type superconducting fault current limiter(SFCL) is composed of a series transformer and superconducting unit of the YBCO coated conductor. The primary and secondary coils in the transformer were wound in series each other through an iron core and the YBCO coated conductor was connected with secondary coil in parallel. In this paper, we investigated the current limiting characteristics through initial line current after fault initiation. through the analysis, it was shown that the smaller initial line current is superior to current limiting characteristics and a point of view of power burden of the YBCO coated conductor.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.21-25
• /
• 2013

In power grid, in order to level out the generation with demand, up-gradation of the system is occasionally required. This will lead to more fault current levels. However, upgrading all the protection instruments of the system is both costly and extravagant. This issue could be dominated by using Smart Fault Current Controller (SFCC). While the impact of Fault current Limiters (FCL) in various locations has been studied in different situations for years, the performance of SFCC has not been investigated extensively. In this research, SFCC which has adopted the characteristics of a full bridge thyristor rectifier with a superconducting coil is applied to three main locations such as load feeder, Bus-tie position and main feeder location and its behavior is investigated through simulation in presence and absence of small Distributed Generation unit (DG). The results show a huge difference in limiting the fault current when using SFCC.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.460-463
• /
• 1990

The normal and fluorinated high-Tc superconducting materials, $YBa_2Cu_3O_{7-x}F_y$with $0.25{\leq}x{\leq}0.55\;and\;0.00{\leq}y{\leq}0.30$, were synthesized to investigate the dopping effect of fluorine atom on the superconductivity of Y123 and studied by X-ray diffraction analysis and electron probe microanalysis, resistivity and thermopower measurements, and polarized micro-Raman spectroscopy. The reproducible micro-Raman spectra were recorded and analyzed. The coherent assignments could be suggested for the spectra of normal and fluorinated samples. The fluorine atoms introduced were found to be substituted for oxygen in pyramidal Cu-O units rather than in Cu-O chains. The unit cell parameters were decreased upon the substitution of oxygen by fluorine atom. From the decreasing cell parameters and Tc, the increasing thermopower, and the possible assignments of the vibrational modes, it could be suggested that the dopping of fluorine atom localizes the superconducting electrons in Y123.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.12
• /
• pp.1187-1192
• /
• 2000

Ternary (Mo-Ru-Pd) and binary (Mo-Ru, Mo-Pd) alloys have been prepared using an Ar arc melting furnace. Mo and the noble metals, Ru and Pd, are the constituents of metallic insoluble residues, which were found in the early days of post-irradiation studies on uranium oxide fuels. In the present study, the structure of the alloys was evaluated using a powder X-ray diffractometer. Unit cell parameters were determined by least squares refinements of powder X-ray diffraction data. Scanning electron microscopic analyses of the surface of the alloys indicated that surface morphology was dependent on the crystallographic structure as well as its composition. Measurements of the magnetic susceptibility of the alloys showed evidence of superconducting transition from 3 to 9.2 K. Among the ternary and binary alloys, the ${\sigma}-phase$ showed the highest superconducting transition temperature,~9.2 K.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.241-246
• /
• 2002

We have performed the current and voltage loading tests of resistive superconducting fault current limiters (SFCLS) based on $YBa_2$$Cu_3$$O_{7}$(YBCO) films with the diameter of 2 inch. The SFCL consists of meander-type YBCO stripes covered with 200 nm Au layer grown in situ for current shunt and heat dispersion at hot spots. The minimum quench current of an SFCL unit was about 25 Apeak. Seven SFCL units were connected in parallel fur the current load ing tests at power source of 100 $V_{rms}$ $/2,000A_{rms}$. This SFCL units had maximum limiting current of 170 Apeak during the fault instant and then successfully controlled the fault current below 100 Apeak within 1~2 msec after short circuit. Increased short current also reduced the quench completion time with little change of current limiting characterization. We connected six SFCL units in series fur the voltage loading tests at power source of $1,200 V_{rms}$/170 $A_{rms}$ at this time. The shunt resistors were inserted into each SFCL unit to eliminate power imbalance originated from serial connection of SFCL units. Each SFCL unit was quenched simultaneously during the fault condition. The current increased up to 40 $A_{peak}$ and decreased to 14 $A_{peak}$ after 3 cycles. Quench was completed within 1 msec after the fault. We confirmed operating characteristics of 140 kVA($120 A_{rms}$ $\times$ 1,200 $V_{rms}$) SFCL and presented the manufacturing possibility of 3.3 kV SFCL using 4 inch YBCO films.BCO films.lms.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.140-142
• /
• 2003

We have designed a SFQ (Single Flux Quantum) D2 Cell and Inverter(NOT) for a superconducting ALU (Arithmetic Logic Unit). To optimize the circuit, we have used Julia, XIC and Lmeter for simulations and layouts. We obtained the circuit margin of larger than $\pm$25%. After layout, we drew chip for fabrication of SFQ D2 Cell and Inverter. We connected D2 Cell and Inverter to jtl, DC/SFQ, SFQ/DC and RS flip-flop for measurement.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.762-771
• /
• 1988

This paper presents the experimental study to confirm the basic properties extract the operating problems of SMES. A new fast control system including u-computer and 12pulse power converter are designed and fabricated. The experiment of 25KJ SMES discharge and charge is carried out by I-C (Inductor-Converter) unit using a new proposed control system. The proposed control algorithm is proved by the simulations and control properties tests. It is also confirmed experimetally that SMES connected I-C unit controlled by this control scheme has an effects on compansating freguency fluctuation by independent active power control.