• Wind and Structures
• /
• 제34권2호
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2788-2802
• /
• 2021

Multigroup cross section (MG XS) generation by the UNIST in-house Monte Carlo (MC) code MCS for fast reactor analysis using nodal diffusion codes is reported. The feasibility of the approach is quantified for two sodium fast reactors (SFRs) specified in the OECD/NEA SFR benchmark: a 1000 MW_th metal-fueled SFR (MET-1000) and a 3600 MW_th oxide-fueled SFR (MOX-3600). The accuracy of a few-group XSs generated by MCS is verified using another MC code, Serpent 2. The neutronic steady-state whole-core problem is analyzed using MCS/RAST-K with a 24-group XS set. Various core parameters of interest (core k_eff, power profiles, and reactivity feedback coefficients) are obtained using both MCS/RAST-K and MCS. A code-to-code comparison indicates excellent agreement between the nodal diffusion solution and stochastic solution; the error in the core k_eff is less than 110 pcm, the root-mean-square error of the power profiles is within 1.0%, and the error of the reactivity feedback coefficients is within three standard deviations. Furthermore, using the super-homogenization-corrected XSs improves the prediction accuracy of the control rod worth and power profiles with all rods in. Therefore, the results demonstrate that employing the MCS MG XSs for the nodal diffusion code is feasible for high-fidelity analyses of fast reactors.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권1호
• /
• pp.15-24
• /
• 2017

Purpose: Korea is expected to enter an aged society in 2018 and then a super-aged society in early 2025. The country's aging is progressing faster than any other country in the world. However, the foundation of the elderly friendly industry is weak, and measures at the government level are urgently needed. Especially, housing problems of the elderly are one of the most urgent measures to be taken. Korea does not have the minimum residential area standard for the elderly, and the current general minimum residential area standard is based on the survey of the housing situation without scientific evidence. Therefore, both standards need to be revised as soon as possible based on scientific evidence. Methods: The minimum residential area standard has been calculated following Karl H. E. Kroemer's Min or Max design also being called as-single cut and dual cut theory- as the maximum population value and minimum population value theory of Ernest J. McCormick. Therefore there is a need for a formula made using a few key factors, such as corresponding dimension, practical dimension, clearance, spare dimension, integrated dimension. These elements can be defined and used as formulas to calculate minimum residential area standards. Results: Assuming the results of the spatial variability in this study showed that it is possible to raise the standard of living in a terms of sustainable minimum size for the young, old and all residents. Implications: The government should set a minimum residential area standard with scientific grounds and set up a policy improving the life of people who live in an needy residential environment.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.305-324
• /
• 1997

Numerous materials such as amalgam, IRM, SuperEBA, dessicated ZOE, and Ketac-Silver have been used as a root-end filling material or to repair furcation perforations. But so far no material has been found to satisfy all of the requirements of an ideal restorative material. Recently, mineral trioxide aggregate (MTA) has been suggested for use as a root end filling material and for the repair of furcation perforations. The purpose of this study was to compare the effect of MTA on the proliferation of MC3T3/E1 osteoblastic cell, formation of bone nodule, alkaline phosphatase activity, and finally the tissue reaction of bone with those of amalgam, IRM, SuperEBA, dessicated ZOE, and Ketac-Silver. The following conclusions were drawn within the limits of the experimental results : 1. MTA showed a excellent proliferation of osteoblastic cell and Ketac-Silver showed moderate proliferation of osteoblastic cell. The rest of test materials showed no proliferation of osteoblastic cell. 2. Many of definite bone nodules were found in the MTA group. In contrast, Ketac-Silver group showed no definite bone formation but only showed mild sign of bone formation. 3. Alkaline phosphatase activity of Ketac-Silver and MTA showed similar results. But both of them showed higher activity than that of other materials (p<0.005). 4. The tissue reaction to implanted MTA in the calbarium of mouse was milder than that observed with other materials. The tissue reaction of dessicated ZOE showed the worst results among the test materials.

• 한국식품영양학회지
• /
• 제21권3호
• /
• pp.336-343
• /
• 2008

This study was conducted to investigate the effects of caffeine on lipid and mineral content in the serum of rats given a caffeine free diet(FC), a low caffeine diet(LC), a medium caffeine diet(MC), a high caffeine diet(HC) or a super-high caffeine diet(SHC) for 5 weeks. Thirty male Sprague-Dawley rats(body weight, $110{\pm}0.3$ g) were blocked into 5 groups and fed diets with or without pure caffeine. Caffeine intake models showed a lower mean-weight gain, food intake and food efficiency in the high caffeine diet groups(MC, HC and SHC groups) than the groups receiving a caffeine free or low caffeine diet(FC and LC groups). Serum total lipid, total cholesterol and LDL-cholesterol levels decreased, but the serum HDL-cholesterol level increased according to the increase in caffeine intake. Serum total lipid, HDL-cholesterol and serum triglyceride were significantly lower in the HC and SHC groups than the FC group. All of the serum minerals decreased as caffeine intake increased. Serum iron, calcium, magnesium and phosphorus significantly decreased in the HC and SHC groups compared to the FC group. Caffeine intake was associated with less weight gain and reduced serum total cholesterol, triglyceride and total lipid. The results suggest that rats fed high amounts of caffeine may be susceptible to osteoporosis due to their low levels of calcium, magnesium and phosphorus.

• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.114-123
• /
• 1985

이 논문은 packet switching 방식에 의한 공중 computer 통신망 개발에 관한 4편의 논문중 제 2부의 논문으로 제 1부의 KORNET의 개요 및 netwo.k managementcenter (NMC)개발에관한 논문에 이어 KO-RNET의 설계와 networhnode Processor(NNP)의 개발에 대해 기술한다. KORNET은 3개의 NNP와 하나의 NMC 로 일차 구성하였는데, NNP는 MC68000 microprocessor를 이용한 multiprocessor system으로 구현되었고, HMC는 중형 computer인 Mv/8000 system을 사용하여 개발하였다. KORNET에서의 packet service 방식은 virtual circuit(VC) 방식으로 하고 routing은 node나 선로의 상태변화에 쉽게 대처할 수 있는 분산적응방식(distributed adaptive routinB)을 사용하였다. 또한, buffo. management는 dy-namic sharing 방식을 채택하여 storage의 사용에 대한 효율성을 높였다. NNP system의 hardware는 modularity를 고려하여 확장이 용이하게 하였으며, software는 CCITT 권고사항 X.25, X.3, X.28, X.29등을 따라 구현하였다.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.64-75
• /
• 2009

최근 조선소에서 고출력 디젤엔진의 요구에 의해서 초대형 저속 2행정 디젤엔진이 개발되었으며, 연속최대출력이 $8{\sim}14$실린더를 갖는 10만 마력 이상의 엔진을 사용할 수 있게 되었다. 이러한 엔진들은 열효율, 운전에 대한 신뢰성, 강인성 및 기동성은 뛰어나지만 크랭크축을 포함한 추진축계에서 높은 비틀림진동을 유발한다. 따라서 이 연구에서는 엔진설계자의 입장에서 비틀림진동을 줄이기 위하여 튜닝 비틀림진동 댐퍼를 갖는 추진축계의 비틀림진동을 이론적으로 검토하였으며 실험모델인 12K98MC엔진과 12RT-flex엔진에서 튜닝댐퍼의 성능과 동적거동을 확인하고 있다.

• 한국과학예술포럼
• /
• 제29권
• /
• pp.279-292
• /
• 2017

본 연구는 극영화를 비롯한 애니메이션의 갈등을 효과적으로 비주얼스토리텔링(Visual Story Telling, VST)하는 것이, 작품의 성공 여부를 결정짓는 중요한 요인이라고 인식하면서 시작되었다. 본 연구의 목적은 그동안 서사적, 시각적 차원에 치중한 VST 연구를 갈등강도와 VST 요소를 분석하여, 공학적으로 해석하는 것이다. 따라서 본 논문에서는 전 세계적으로 흥행에 성공한 극장용 애니메이션(4편)의 갈등을 분석하고, 이를 공학적으로 접근하여 VST 해석을 시도하였다. 연구결과 및 내용은 다음과 같다. 첫째, 성봉선과 로버트 맥키의 서사적 이론을 바탕으로, 갈등 장면을 분류하고 갈등의 종류를 찾아내었다. 또한 강위역의 5B모델을 바탕으로 총 108 개의 갈등 샷(shot)을 추출하였다. 둘째, 전문가 실험을 통하여 갈등 샷의 갈등강도를 찾아내었다. 셋째, 내적, 초개인적 갈등에서 각각 15개의 유의미한 갈등의 시각적 요소를 추출하였다. 넷째, 실험 결과로 내적, 초개인적 갈등에서 시각적 요소의 신뢰성은 100-83.33% 의 범위에 있다는 것을 확인하였고, 사용빈도는 각각 5.88-70.59% 및 5-70%까지 광범위하게 분포한다는 것을 파악할 수 있었다. 이는 아티스트(Artist)의 감각에 의존하던 VST 표현을 공학적으로 해석할 수 있게 됨을 의미한다. 이러한 연구결과를 바탕으로 애니메이션 사전제작 단계에서 작품의 갈등표현을 성공적으로 예측할 수 있게 해 줄 VST 툴(Tool) 개발의 토대가 될 것으로 기대한다.

• 한국주조공학회지
• /
• 제20권2호
• /
• pp.104-109
• /
• 2000

Three different white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their abrasion wear behavior in as-cast and heat-treated conditions. The specimens were produced using a 15㎏-capacity high frequency induction furnace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into Y-block pepset molds. Three combinations of the alloying elements were selected so as to obtain the different types of carbides : 3%C-10%Cr-5%Mo-5%W(alloy No. 1: $M_7C_3$ and $M_6C$), 3%C -10%V-5%Mo-5%W(alloy No. 2: MC and $M_2C$) and 3%C-17%Cr-3%V(alloy No. 3: $M_7C_3$ only). A scratching type abrasion test was carried out in the states of as-cast(AS), homogenizing(AH), air-hardening(AHF) and tempering(AHFT). First of all, the as-cast specimens were homogenized at $950^{\circ}C$ for 5h under the vacuum atmosphere. Then, they were austenitized at $1050^{\circ}C$ for 2h and followed by air-hardening in air. The air-hardened specimens were tempered at $300^{\circ}C$ for 3h. 1 ㎏ load was applied in order to contact the specimen with abrading wheel which was wound by 120 mesh SiC paper. The wear loss of the test piece(dimension: $50{\times}50{\times}5$ mm) was measured after one cycle of wear test and this procedure was repeated up to 8 cycles. In all the specimens, the abrasion wear loss was found to decrease in the order of AH, AS, AHFT and AHF states. Abrasion wear loss was lowest in the alloy No.2 and highest in the alloy No.1 except for the as-cast and homogenized condition in which the alloy No.3 showed the highest abrasion wear loss. The lowest abrasion wear loss of the alloy No.2 could be attributed to the fact that it contained primary and eutectic MC carbides, and eutectic $M_2C$ carbide with extremely high hardness. The matrix of each specimen was fully pearlitic in the as-cast state but it was transformed to martensite, tempered martensite and austenite depending upon the type of heat-treatment. From these results, it becomes clear that MC carbide is a significant phase to improve the abrasion wear resistance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.465-469
• /
• 2006

In recent years there has been considerable interest in the construction of super high-rise buildings. From the prior art, various procedures and devices for surveys during and after the phase of erection of a high-rise building are known. High-rise buildings are subject to strong external tilt effects caused, for instance, by wind pressures, unilateral thermal effects by exposure to sunlight, and unilateral loads. Such effects are a particular challenge in the phase of construction of a high-rise building, in as much as the high-rise building under construction is also subject to tilt effects, and will at least temporarily lose its - as a rule exactly vertical - alignment. Yet construction should progress in such a way that the building is aligned as planned, and particularly so in the vertical, when returning into an un-tilted basic state.It is essential that a straight element be constructed that theoretically, even when moving around its design centre point due to varying loads, would have an exactly vertical alignment when all biasing conditions are neutralised. Because of differential raft settlement, differential concrete shortening, and construction tolerances, this ideal situation will rarely be achieved. This paper describes a procedure developed by the authors using GPS observations combined with a network of precision inclination sensor to provide reliable coordinated points at the top of the worldwide highest-rise building under construction in Dubai.