• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.89-100
• /
• 2019

The purpose of this study is to analyze the characteristics of bearing capacity of pre-bored super strength PHC (SSPHC) piles socketed in rocks based on dynamic load test results. Because the SSPHC piles have high compressive concrete strengths compared with those of regular high strength PHC piles, the allowable structural strengths of the SSPHC piles were increased. For optimal design of the super strength PHC piles, the geotechnical bearing capacity of the SSPHC piles should also increased to balance the increased allowable structural strength of the SSPHC piles. Current practices of pile installation apply the same amount of driving energy on both SSPHC and high strength PHC piles. As results of analyzing factors that influence bearing strength of SSPHC piles using dynamic load test, there was no relationship between SPT-N value at pile toe and end bearing capacity. But driving energy effects on end bearing capacity. In case of skin friction, driving energy had no effects. And reasonable method verifying design bearing strength is necessary because end bearing capacity is not considered sufficiently in restrike test results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.543-548
• /
• 2021

The higher the resolution of the image, the higher the satisfaction of the viewers of the image, and the super-resolution imaging has a considerable increase in research value among the fields of computer vision and image processing. In this study, the main features of low-resolution image LR are extracted mainly using deep learning super-resolution models. It learns and reconstructs the extracted features, and focuses on reconstruction-based algorithms that generate high-resolution image HR. In this paper, we investigate SRCNN and VDSR in a super-resolution algorithm model based on reconstruction. The structure and algorithm process of the SRCNN and VDSR model are briefly introduced, and the multi-channel and special form are also examined in the improved performance evaluation function, and understand the performance of each algorithm through experiments. In the experiment, an experiment was performed to compare the results of the SRCNN and VDSR models with the peak signal-to-noise ratio and image structure similarity, so that the results can be easily judged.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.382-389
• /
• 2021

By applying super-high pressure (150-250 MPa) to a sealed pressure vessel, it is possible to make oyster shucking machine that automatically opens two-sheet shellfish or oysters. Possibility of developing a shucking machine was confirmed by identifying the working pressure for meat of oysters produced in the southern coast and conducting sensory evaluation of meat oysters. As a result of confirming the shucked oysters under super-high pressure of 150 MPa in the pressure vessel, the number of type A with separated shells and well-separated meat was 22 and type B with both shells and internal meat and shells not separated. For the oysters that were treated at 175 MPa, there were 58 type As with shell separated and meat well separated and 42 type Bs without oyster shells and insides. When looking at the oysters shucked at 200 MPa in the pressure vessel, the number of type A was 86 and type B was 14 accounting for 86% of oysters with good marketability. As a result of shucking oysters by applying 250 MPa, 96% type A oysters and 4% type B oysters were obtained from the total specimen. The total specimen oyster weight used in the conducted experiment was 6 kg, the average oyster shell weight was 3.99 kg and the average oyster meat weight was 1.25 kg. Therefore, the fatness of oyster meat, which measures the added value of oysters, is 20.8%. Sensory evaluation was conducted on thinned oysters by hand and type A oysters shelled by machine with an operating pressure of 200 MPa. The hand-worked oyster sample scored 4.7 points only in salty taste, and scored 5.0 or higher in color, shape, smell, fishy taste, texture and preference.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.41-56
• /
• 2017

This study is an intensive study on Tae Rin Lee's research results. A linear system for Estimating the Strength of Super Personal Conflict (ESSPC) in animations is proposed. Tae Rin Lee has extracted the Super Personal Conflict (SPC) shots of animations, and obtained the strength through the experts' psychological test experiment. The purpose of this study is to find a model that automatically computes the superpersonal conflict intensity value (ESSPC). By utilizing these results, 1) 20 image feature vectors are suggested for analyzing the SPC, and 2) a linear system is found for auto-calculating ESSPC by using the pseudo inverse matrix. The proposed system shows 9.25% root mean square error and the effectiveness is proven.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.73-93
• /
• 2021

This study typifies fashion mobile plays in a digital environment and explores the experiential value created by them through a case study of a fashion brand mobile app. For the case analysis, mobile plays were divided into four types: intrinsic motivation/active participation, intrinsic motivation/passive participation, external motivation/active participation, and external motivation/passive participation, depending on the mobile players motivation and level of participation. Among the global fashion brand mobile apps released from 2009 to 2019, 16 cases suitable for the analytical framework were used for final analyses. The main results are as follows. First, mobile play value include characteristics such as networkability, immersion, hyper-spatiality, and super-temporality in addition to the attributes of a traditional play such as spontaneity, uncertainty, regularity, and playfulness. Second, the four types of mobile play provide participants with an experiential value such as creative value, emotional value, social value, and exploitative value. This study has academic implications in terms of introducing a new framework that can typify mobile plays and suggest practical implications for what experiential value fashion companies can give consumers through mobile app marketing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.81-82
• /
• 2019

In this study, the Proctor penetration resistance test value and the hardness value of the improved Durometer were compared and analyzed for the change in the FA replacement rate of the concrete using CGS fine aggregate. The results are summarized as follows. It is. 1) The Proctor penetration resistance test value and the hardness value of the improved Durometer showed a high correlation in the form of a curve. 2) About surface finish Super-resolution with the improved Durometer is considered to be useful when using about 50 HD and about 80 HD in the end to determine the surface finishing work time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.73-81
• /
• 2013

Purpose: The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength of zirconia ceramic to 3 resin cements. Materials and methods: A total of 143 disk-shaped Zirconia blocks (HASS Co., Gangneung, Korea) were randomly divided into three treatment groups: (1) only 50 ${\mu}m$ $Al_2O_3$ sandblasting, (2) 50 ${\mu}m$ $Al_2O_3$ sandblast and zircona liner, (3) 50 ${\mu}m$ $Al_2O_3$ sandblasting and Rocatec (3M ESPE, Seefeld, Germany). Bistite II (Tokuyama Dental Co., Japan), Panavia F (Kuraray Medical, Japan), and Superbond C&B (Sun Medical, Japan) were used to cement onto the zirconia. After 24h of storage in distilled water, shear bond strength was evaluated. High value group was re-tested after thermocycling at 5,000 cycles(5-$55^{\circ}C$). Shear bond strength data were analyzed with one-way ANOVA, two-way ANOVA test and Post Hoc Test (${\alpha}$=.05). Shear bond strength data before and after thermocycling were analyzed with Independent sample T test (${\alpha}$=.05). Results: Super-bond C&B treated with Rocatec showed the most high shear bond strength. Super-bond C&B groups resulted in significantly higher than other cement groups (P<.05). Rocatec groups resulted in significantly higher than other surface treatment groups (P<.05). Shear bond strength has increased in Panavia F treated with Zirconia liner (P<.05). After thermocycling, shear bond strength was increased in Super-bond C&B treated with Rocatec but decreased in other groups (P<.05). Conclusion: Super-bond C&B cement resulted the highest shear bond strength and Rocatec system enhanced the shear bond strength. After thermocycling, shear bond strength has decreased in most resin cements except Super-bond C&B treated with Rocatec.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.748-752
• /
• 1999

This study was carried out to compare the growth and fatty acids composition of the rotifer (Brachionus rotundiformis) cultured in high density by the various enrichments and culture methods. The rotifer fed on condensed freshwater Chlorella was enriched with $\omega$-yeast, Algamac, Super Selco and marine Chlorella. In another culture method, the rotifer was cultured with enrichment supplements for 6 hours after feeding with condensed freshwater Chlorella supplement for 18 hour. The rotifer fed with condensed marine Chlorella for 24 hours without fieshwater Chlorella was used as a control group. Culture tanks (5 $\ell$ working volume) was immersed in a water bath ($28^{\circ}C$). The density of rotifer and dissolved oxygen level in water was stable in control group of rotifer cultured with condensed marine Chlorella for 24 hours and the n-3 HUFA content of rotifer was the highest among the rotifer culture methods. However, the density of rotifer and dissolved oxygen level in the groups of rotifers enriched with $\omega$-yeast, Algamac and Super Selco by methods were drastically decreased, The n-3 HUFA contents of rotifers enriched by Super Selco were higher than those of rotifer enriched by either $\omega$-yeast or Algamac in both methods. The results from this experiment indicated that supplementation of condensed marine Chlorella for 24 hour by the semi-continuous culture was effective for the improvement of the nutritional value of rotifer and it could provide the stable growth condition for rotifer culture in high density.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.2
• /
• pp.103-108
• /
• 2012

Recently, as the prevalence of high-performance mobile devices and the application of the multimedia content are expanded, Super Resolution (SR) technique which reconstructs low resolution images to high resolution images is becoming important. And in the mobile devices, the development of the SR algorithm considering the operation quantity or memory is required because of using the restricted resources. In this paper, we propose a new single frame fast SR technique suitable for mobile devices. In order to prevent color distortion, we change RGB color domain to HSV color domain and process the brightness information V (Value) considering the characteristics of human visual perception. First, the low resolution image is enlarged by the improved fast back projection considering the noise elimination. And at the same time, the reliable edge map is extracted by using the LoG (Laplacian of Gaussian) filtering. Finally, the high definition picture is reconstructed by using the edge information and the improved back projection result. The proposed technique removes effectually the unnatural artefact which is generated during the super resolution restoration, and the edge information which can be lost is amended and emphasized. The experimental results indicate that the proposed algorithm provides better performance than conventional back projection and interpolation methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.3-6
• /
• 2012

Due to recent rapid growth of mobile market, the modern people increasing make use of mobile contents as a means to obtain the desired information quickly by overcoming various restraints of a computer. The wide range of recommended contents, however, takes much time in selection of contents. To resolve such issues, a system that predicts the contents desired by the user and makes an accurate recommendation is necessary. In this paper, in order to provide the desired contents in line with the user demands, a method to increase select the number of recommendation using cooperative filtering is proposed. In the first step, the categories are formulated with super-classes and the similarity between the target customer and users is found, and the nearest-neighbors are constituted to find the preference predictions between super-classes, and the super-class with the highest resulting value is recommended to the target customer. In the second step, the preference predictions between sub-classes are found and the sub-class with the highest value is recommended to the target customer. In the experiment, mobile contents are recommended through super-class-based cooperative filtering, and then the mobile contents are recommended through sub-class-based cooperative filtering, and sub-class collaborative filtering method to select a high number of verification.