Browse > Article
http://dx.doi.org/10.12814/jkgss.2019.18.3.089

Analysis of Bearing Capacity of Rock Socketed Pre-Bored Super Strength Piles Based on Dynamic Load Test Results  

Kim, Rakhyun (Material&Structure Research Group, R&D Center)
Kim, Dongwook (Department of Civil and Environmental Engineering, Incheon National University)
Publication Information
Journal of the Korean Geosynthetics Society / v.18, no.3, 2019 , pp. 89-100 More about this Journal
Abstract
The purpose of this study is to analyze the characteristics of bearing capacity of pre-bored super strength PHC (SSPHC) piles socketed in rocks based on dynamic load test results. Because the SSPHC piles have high compressive concrete strengths compared with those of regular high strength PHC piles, the allowable structural strengths of the SSPHC piles were increased. For optimal design of the super strength PHC piles, the geotechnical bearing capacity of the SSPHC piles should also increased to balance the increased allowable structural strength of the SSPHC piles. Current practices of pile installation apply the same amount of driving energy on both SSPHC and high strength PHC piles. As results of analyzing factors that influence bearing strength of SSPHC piles using dynamic load test, there was no relationship between SPT-N value at pile toe and end bearing capacity. But driving energy effects on end bearing capacity. In case of skin friction, driving energy had no effects. And reasonable method verifying design bearing strength is necessary because end bearing capacity is not considered sufficiently in restrike test results.
Keywords
Super strength PHC pile; Pre-bored pile; Bearing capacity; Dynamic load test; Driving energy;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Choi, K. C., Moon, Y. H., Oh, W. K. and Chun B. S. (2007). "The Estimation of Bearing Capacity of Auger-drilled Pile in Sand-Gravel by Dynamic Load Test", 2007 Autumn Conference of The Korean Society for Railway, pp.69-76. (in Korean)
2 Chatterjee, K., Choudhury, D., Rao, V. D. and Mukherjee, S. P. (2015), "Dynamic Analyses and Field Observations on Piles in Kolkata City", Geomechanics and Engineering, Vol.8, No.3, pp.415-440.   DOI
3 Cho, K. J., Jung, K. G., Song, C. Y. and Park, J. B. (2010), "Evaluation of the Tip Resistance of Prebored PHC Pile on Weathered Rock", KSCE 2010 Convention, pp.990-993. (in Korean)
4 Choi, S. B., Kim, B. I., Han, S. J. and Kim, S. S. (2003), "The Bearing Capacity Evaluation of Pre-Augering Piles", KSCE 2003 Convention, pp.3348-3353. (in Korean)
5 Davisson, M. T. (1972), "High Capacity Piles", Proc. Lecture Series on Innovations in Foundation Construction, ASCE, Illinois Section, Chicago, March 22, pp.81-112.
6 Davisson, M. T. (1975), "Pile Load Capacity", Proc. ASEC Conf. Design Construction and Performance of Deep Foundations, ASCE, University of California, Berkeley.
7 Goble, G. G. and Likins, G. (1996). "On the Application of PDA Dynamic Pile Testing", In Proceedings of the Fifth International Conference on the Application of Stress-Wave Theory to Piles, pp.263-273.
8 Hong, J. S., Lee, W. J., Kim, S. H. and Lee, M. W. (1995), "PILE SESSION : Study on a Evaluation of Pile Bearing Capacity using Dynamic Test", KGS Spring '95 National Conference, pp.43-44. (in Korean)
9 Hong, W. P., Chai, S. G. and Han, J. G. (2002), "Skin Friction Capacity of SDA(Separated Doughnut Auger) Pile", KSCE 2012 Convention, pp.2081-2084. (in Korean)
10 Hwang, U. S. (2019), "Study on Bearing Capacity of Ultra High Strengh End Extended PHC Pile by Loading Test", Journal of the Korea Academia-Industrial cooperation Society, Vol.20, No.3, pp.269-275. (in Korean)   DOI
11 Kim, D. G., Park, J. B., Yang, S. J., Kim, T. N. and Lee, D. M. (2017), "High Strength and Ultra High-Strength PHC Pile Test Case with High Design Load", KSCE 2017 Convention, pp.589-590. (in Korean)
12 Min, K. H., Park, K. H., Shin, J. H., Park, J. H. and Hwang, U. S. (2013). "Development and Application of Ultra High Strength PHC Pile", Journal of the Korean Geotechnical Society, Vol.29, No.6, pp.17-21. (in Korean)
13 MOLIT (1997), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)
14 MOLIT (2003), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)
15 Park, J. B. and Kwon, Y. H. (2017), "Realizing Study on the Results of Dynamic Load Test of the Bored Pile", KSCE 2017 Convention, pp.457-468. (in Korean)
16 MOLIT (2009), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)
17 Park, J. (2017), "A Comparative Study on the Bearing Capacity of Dynamic Load Test and Static Load Test of PHC Bored Pile", Journal of the Korean Geo-Environmental Society, Vol.18, No.9, pp.19-31. (in Korean)
18 Park, J. B. (2004), "Strength and Friction Behavior of Cement paste poured in the Bored Pile", Journal of the Korean Geo-Environmental Society, Vol.5, No.3, pp.31-39. (in Korean)